Categories

Best Single Stage Regulator

MASTERCOOL 53010-AUT Silver Pressure Test Regulator Kit with R134a Coupler Black

  • SINGLE STAGE NITROGEN REGULATOR is used to test systems for leaks when they do not contain refrigerant.
  • LARGE “T” HANDLE for effortless adjustment of pressure.
  • EASY TO READ 2 ½” GAUGES with rubber gauge guards for additional protection.
  • ¼” SAE FLARE OUTPUT with control valve to keep pressure on the regulator at all times.
  • KIT COMES PACKAGED IN A BLOW MOLDED CASE with nitrogen pressure regulator, 38” yellow charging hose, leak testing adapter and high side R134a....
Check Stock

Forney 85364 MIG Gas Flow Meter and Regulator, MIG/TIG Welders

  • Combination of regulator and flow meter as one single stage piston design unit.
  • Provides accurate regulation of gas flow.
  • Impact resistant machined brass body, polycarbonate flow tube and outer cover.
  • Features regulator and flow meter in one unit.
  • Provides accurate regulation of gas flow designed for MIG and TIG applications.
Check Stock

Palantic AS101 DIN Diving Dive Regulator and Octopus Combo

  • High quality regulator first stage and second stage with 36" yellow hose on the octopus and black hose on the 2nd stage regulator.
  • High performance over-balanced first stage provides progressively greater intermediate pressure as depth and gas density increases for superior gas delivery under the most extreme conditions.
  • Environmental sealing prevents internal corrosion, contaminants, and icing of the first stage.
  • Large purge button. Unbalanced Flow-by Piston Regulator.
Check Stock

Palantic AS101 Yoke Diving Dive Regulator and Octopus Combo (SCR-01-YOKE-207)

  • High quality regulator first stage and second stage with 36" yellow hose on the octopus and black hose on the 2nd stage regulator.
  • Environmental sealing prevents internal corrosion, contaminants, and icing of the first stage.
Check Stock

NQN 2-Stage Automatic Changeover LP Propane Gas Regulator with Two 18" RV Pigtail Propane Hoses with Gauge, Stainless Braided QCC1 1/4" Inverted Male Flare

  • 【2-Stage Auto Changeover LP Propane Gas Regulator】This 2-Stage regulator can be connected to 2 propane tanks at the same time and automatically switches from primary to reserve tank when primary is empty and The indicator will changes color to let you know when a tank has been depleted and needs to be refilled also remind you switching to the backup tank. For RVs with dual propane tanks allow removal of Allows removal of empty cylinder for refill without interrupting propane supply..
  • 【Specification & parameters】RV Propane Regulator: Primary Cylinder Capacity 210,000 BTU/hr, Reserve Cylinder 130,000 BTU/hr. Inlets are 1/4" SAE Inverted Flare, Outlet is 3/8" Female NPT, RV Pigtail Propane Hose: 1/4" Male Inverted Flare and QCC1 Fitting. All Fitting Connectors of Propane Hose, both ends of 2-stage regulator made of 100% Solid Brass. RV propane hose made of durable stainless steel braided. Propane Hose and regulator with CSA Certification ensure air tightness 、stability.
  • 【2 Pack 18''Stainless Braided QCC1 1/4" Inverted Male Flare RV Pigtail Propane Hose with Gauge】1/4" inverted male flare stainless steel braided RV pr....
Check Stock

CGA580 Argon CO2 Regulators Argon Gauges Gas Welding Regulator Compatible with Mig Tig Miller Lincoln Weld 0-4500PSI / 0-10BAR - CO2 Argon Regulator with 6.6Ft Hose

  • Universal Gas Welding Regulator - This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet). Argon gauge 0 to 4500 PSI, argon gauge regulator provides accurate regulation of gas flow. This Gas Hose Is Ideal For Fitting Mig And Tig Welding. Ideal for commercial, industrial and laboratory applications.
  • 100% Brand New Argon Regulator with Hose - The CO2 regulator body is made of brass, Single-stage regulator, built-in pressure overload automatic degassing device. Large T-shaped adjustment handle, easy to adjust the pressure by hand. The flow tube is made of polycarbonate.
  • Accurate Argon Regulator with Pressure Gauge - CGA580 fitting (15/16" Male Thread), 9/16" male thread, 5/8" female thread. Argon gas meter measuring range: 0 to 4500 PSI. Argon CO2 Regulators Gauges Gas Welding Regulator With 6.6Ft Gas Hose. 6.6Ft Hose Quick Connect Fitting enable your tanks at a safe distance from your welding projects.
  • Reliable CGA580 Argon CO2 Regulator - The Argon CO2 flowmeter regulator has a plastic adjustment knob that allows for smooth "light touch" flow settings and has an internal safety relief design, Provides a safe environment for car driving. CO2 regulator with 2" dual gauges that will be easy to read.
Check Stock

Propane Regulator, High Pressure, Adjustable 0-60 lbs

  • MEGR-1122H-AAJ High Pressure 10 PSI First Stage Regulator (1/4" Inlet x 1/2" Outlet) 1,000,000 BTU Capacity.
  • MEGR-1652-CFF Low Pressure 11" Water Column Backmount 90 Degree Second Stage Regulator (1/2" Inlet x 3/4" Outlet) 1,000,000 BTU Capacity.
  • POL x 1/4" Pigtail to connect between the propane tank and the first stage high pressure regulator.
Check Stock

Marshall Excelsior MEGR-6120-30 High Pressure Reg Bulk High Cap

  • MEGR-1122H-AAJ High Pressure 10 PSI First Stage Regulator (1/4" Inlet x 1/2" Outlet) 1,000,000 BTU Capacity.
  • MEGR-1652-CFF Low Pressure 11" Water Column Backmount 90 Degree Second Stage Regulator (1/2" Inlet x 3/4" Outlet) 1,000,000 BTU Capacity.
  • POL x 1/4" Pigtail to connect between the propane tank and the first stage high pressure regulator.
Check Stock

SCHULZ REFRIGERATED AIR DRYER FOR AIR COMPRESSOR, COMPRESSED AIR SYSTEMS, 75 CFM, GOOD FOR 15HP & 20HP COMPRESSORS (STAND ALONE DRYER)

  • NEW 75 CFM SCHULZ NON-CYCLING REFRIGERATED AIR DRYER 115V, SINGLE PHASE.
  • PLEASE NOTE:: YOU MUST USE A MINIMUM 1 MICRON FILTER / WATER SEPARATOR BEFORE REFRIGERATED AIR DRYERS.
  • ITS VITAL THAT WATER & OIL ARE REMOVED FROM THE PIPING BEFORE HITTING THE DRYER. PLEASE SELECt OPTION " WITH PRE-FILTER" FOR A COMPLETE KIT THAT INCLUDES THE DRYER, PLUS STAGE 1 WATER SEPARATOR FILTER + STAGE 2 COALESCING FILTER FOR OIL. IF YOU NEED FILTER AND AIR PRESSURE REGULATOR, PLEASE SELECT "WITH REGULATOR PRE-FILTER" FROM THE ABOVE LINK..
  • 75 CFM @ 100 PSI / 1" FEMALE NPT INLET & OUTLET / REFRIGERANT FLUID TYPE: R134a / WIRE SIZE REQUIRED: 10 GAUGE / DEW POINT: 41 DEGREES FAHRENHEIT AT 100 PSI.
  • 220 PSI MAX INLET / DIMENSIONS IN INCHES: ( HEIGHT 29.25" ) ( WIDTH 13.9" ) (LENGTH/DEPTH 16.9") / 75 LBS.
Check Stock

Palantic AS105 Yoke Diving Dive Regulator and Octopus Combo

  • High quality regulator first stage and second stage with 36" yellow hose on the octopus and black hose on the 2nd stage regulator.
  • High performance over-balanced first stage provides progressively greater intermediate pressure as depth and gas density increases for superior gas delivery under the most extreme conditions.
  • Environmental sealing prevents internal corrosion, contaminants, and icing of the first stage.
Check Stock

3/4 NPT SUPER DUTY Industrial Grade 4 Stages Filter Coalescing Desiccant Dryer Regulator System For Compressed Air Lines Metal Bowls Great For Paint Spray And Plasma Cutter AUTO DRAIN

  • PLEASE NOTE: 3/4" NPT MEASURES 1.050" OUTSIDE THREAD DIAMETER IN INCHES. 3/4" NPT, Industrial Rated 4 Stage Combo Water Filter/ Coalescing Filter/ Desiccant Dryer/ Pressure Regulator System, With Wall Mounting Bracket And Internal Float Drain (AUTO DRAIN) STAGE 1.
  • 175 PSI Max Input. This Unit Will Removing Moisture Water, Moisture Vapor And Oil From Your Compressed Air Lines, Drying Out The Super Clean Air With An In-Line Desiccant Air Dryer, Then Finally Regulator Your Outgoing Air Pressure.
  • STAGE 1: Water Trap Filter. Equipped With 5 Micron Element To Remove 95% Of The Initial Moisture And Debris From Your Compressed Air Line. 11oz Metal Bowl With Visible Sight Glass..
  • STAGE 2: Coalescing Filter Also Known As Oil Removing Filter Armed With A 0.01 Micron Element That Removes 99.98% Of Moisture, Moisture Vapor And Oil That Made Its Way Past Your Stage 1 Filter. 11oz Metal Bowl With Visible Sight Glass..
  • STAGE 3: Desiccant Air Dryer, Dries Out Your Super Clean Air Before Going Downstream To Your Air Tools. Uses 11oz Desiccant Beads In The Bowl. Beads Turn From Blue To Pink When Time To Change. Unit Comes With 4 Bags Desiccant Beads. STAGE4: Pressure Regulator, Regulator Adjusts Output Pressure From 7 To 175 PSI..
Check Stock

1 NPT SUPER DUTY Industrial Grade Filter Regulator Coalescing Desiccant Dryer System For Compressed Air Lines Metal Bowls Great For Paint Spray And Plasma Cutter AUTO DRAIN

  • PLEASE NOTE: 1" NPT MEASURES 1.315" OUTSIDE THREAD DIAMETER IN INCHES. 1" NPT, Industrial Rated 3 Stage Combo Water Filter/ Pressure Regulator/ Coalescing Filter/ Desiccant Dryer System, With Wall Mounting Bracket And Internal Float Drain (AUTO DRAIN) STAGE 1.
  • 175 PSI Max Input. This Unit Will Regulator Your Incoming And Outgoing Air Pressure While Removing Moisture Water, Moisture Vapor And Oil From Your Compressed Air Lines, Then Finally Drying Out The Super Clean Air With An In-Line Desiccant Air Dryer.
  • STAGE 1: Water Trap Filter / Pressure Regulator. Equipped With 5 Micron Element To Remove 95% Of The Initial Moisture And Debris From Your Compressed Air Line. Regulator Adjusts Pressure From 7 To 175 PSI. 11oz Metal Bowl With Visible Sight Glass..
  • STAGE 2: Coalescing Filter Also Known As Oil Removing Filter Armed With A 0.01 Micron Element That Removes 99.98% Of Moisture, Moisture Vapor And Oil That Made Its Way Past Your Stage 1 Filter. 11oz Metal Bowl With Visible Sight Glass..
  • STAGE 3: Desiccant Air Dryer, Dries Out Your Super Clean Air Before Going Downstream To Your Air Tools. Uses 11oz Desiccant Beads In The Bowl. Beads Turn From Blue To Pink When Time To Change. Unit Comes With 4 Bags Desiccant Beads..
Check Stock

1/2 NPT MID FLOW Filter Regulator Coalescing Desiccant Dryer System For Compressed Air Lines Poly Bowls Great For Paint Spray And Plasma Cutter MANUAL DRAIN

  • PLEASE NOTE: 1/2" NPT MEASURES 0.850" OUTSIDE THREAD DIAMETER IN INCHES. 1/2" NPT, Industrial Rated 3 Stage Combo Water Filter/ Pressure Regulator/ Coalescing Filter/ Desiccant Dryer System, With Wall Mounting Bracket And Internal Float Drain (MANUAL DRAIN) STAGE 1.
  • 150 PSI Max Input. This Unit Will Regulator Your Incoming And Outgoing Air Pressure While Removing Moisture Water, Moisture Vapor And Oil From Your Compressed Air Lines, Then Finally Drying Out The Super Clean Air With An In-Line Desiccant Air Dryer.
  • STAGE 1: Water Trap Filter / Pressure Regulator. Equipped With 5 Micron Element To Remove 95% Of The Initial Moisture And Debris From Your Compressed Air Line. Regulator Adjusts Pressure From 7 To 150 PSI. 5oz Poly Bowl With Visible Sight Glass..
  • STAGE 2: Coalescing Filter Also Known As Oil Removing Filter Armed With A 0.01 Micron Element That Removes 99.98% Of Moisture, Moisture Vapor And Oil That Made Its Way Past Your Stage 1 Filter. 5oz Poly Bowl With Visible Sight Glass. Red Indicator Pops Up When Time For Filter Change..
  • STAGE 3: Desiccant Air Dryer, Dries Out Your Super Clean Air Before Going Downstream To Your Air Tools. Uses 5oz Desiccant Beads In The Bowl. Beads Turn From Blue To Pink When Time To Change. Unit Comes With 2 Bags Desiccan....
Check Stock