Categories

Best Single Torsion Spring

Garage Door Torsion Spring Set | 207X2X22 (Right and Left Side) | Without Winding Rods | Left & Right Hand Garage Door Torsion Springs Pair | Garage Door Spring Replacement Kit for Repair

  • ⍟ CORROSION RESISTANT: Replace your garage torsion spring with these black-coated garage door side springs. Our garage door springs set comes with left & right-side corrosion-resistant garage door torsion springs giving you more for less with every purchase!.
  • ⍟ FIND YOUR PERFECT SIZE: These heavy-duty springs are available in multiple sizes. Because the torsion springs for the garage door provide lifting force for your heavy garage door, it must be selected by the spring’s dimensions, rather than the door’s weight. So, before purchasing, please view our garage springs replacement size guide in the listing image section to pick the correct length and wire size..
  • ⍟ 1 YEAR WARRANTY: This garage door spring set comes with a 1-year replacement warranty. Our tension spring garage door design guarantees long life with more than 10,000 cycles..
  • ⍟ REPLACE WORN OUT GARAGE SPRINGS: Add this garage door tension spring replacement set to your door spring kit for easy replacement and installation. While there are helpful online videos on how to install garage door torsion spring replacement and replace broken or worn-out springs, we recommend a professional installation by a repairman..
  • ⍟ NOTE: This garage door springs pair set requires the use of two wi....
Check Stock

Prime-Line GD 12233 Left Hand Wind Torsion Replace Broken Garage Door Springs-0.243 inch x 2 inch x 32 inch, Yellow, 32

  • REPLACE BROKEN SPRINGS – Use this Prime-Line Steel Left Hand Wound Torsion Spring to replace broken garage door springs. It includes stationary and winding cones..
  • REQUIRES – The use of 2 winding rods for replacement. When dual spring installations are involved, it is important to correctly install both the left and right wind springs during the same job..
  • SELECTION – Torsion springs provide lifting force for heavy garage doors and must be selected by the spring’s dimensions, rather than the door’s weight. Use the spring selection guide to assure the proper replacement part has been selected..
  • DIMENSIONS – Garage door torsion spring is: 0.243 inch wire size x 2 inch inside dimension x 32 inch length with yellow color code..
  • MOUNTING – Right-hand springs are mounted to left side of center and left hand springs are mounted to the right side of center (inside the garage looking out)..
Check Stock

Jaccard Super Tendermatic Meat

  • Torsion spring handle design allows for increased efficiency.
  • Single piece comb for easy assembly and dishwasher safe cleaning.
  • Heavy-duty stainless-steel base provides improved stability during operation.
  • Patented stripper frame design provides for easy installation and cleaning of blade set.
  • Patented T Safety Lock maintains alignment and prevents damage to column structure.
Check Stock

New! Garage Door Extension Springs - Stretch Springs - PAIR - for 7' high door (Green)

  • DESCRIPTION: Garage Door Torsion Spring For 7-8 Feet High Door (0.262x2x35) (Black/Right - Red/Left).
  • MATERIAL: Fabricated with high carbon ASTM 229 Class II Oil-Tempered Wire..
  • EXECUTION FACTORS: Spring Rate - Maximum deflection - Maximum load - Wind specifications..
  • CONE TYPE: Diamond cones, stationary cones..
  • CATEGORY: Garage Door Torsion Springs - Garage Door Hardware. Replacement spring(s) must match broken spring(s) measurements. Simple installation, just install new or replace old, rusty springs quickly (professional installation recommended).
Check Stock

DURA-LIFT .207 x 2\ x 23\ Torsion Garage Springs (Yellow, Left & Right Wound)

  • DESCRIPTION: Garage Door Torsion Spring For 7-8 Feet High Doors (0.295x2x41). (Black/Right).
  • MATERIAL: Fabricated with high carbon ASTM 229 Class II Oil-Tempered Wire..
  • EXECUTION FACTORS: Spring Rate - Maximum deflection - Maximum load - Wind specifications.
  • CONE TYPE: Diamond cones, stationary cones..
  • CATEGORY: Garage Door Torsion Springs - Garage Door Hardware. Replacement spring(s) must match broken spring(s) measurements. Simple installation, just install new or replace old, rusty springs quickly (professional installation recommended).
Check Stock

KUNTEC Torsion Bar Unloading Tool Heavy Duty Torsion Key Tool with C Frame Compatible for GMC Chevy Ford Dodge Car Truck Auto

  • FUNCTION: Torsion bar removal tool helps you remove and replace your vehicle’s torsion bar.
  • it removes the spring from the suspension system to accommodate easy parts replacement and keep your car in optimal condition.
  • EASY TO USE: Features larger 7/8” diameter anvil casting threads, this Torsion Bar Unloading Tool will make quick and easy work of your suspension job.
  • COMPATIBILITY: This torsion key tool easily removes or holds the torsion bar in place on a wide variety of vehicles, compatible with a range of models from Chevy, GMC, Dodge, Cadillac, and more.
  • QUALITY: This torsion bar tool is built with heavy-duty forged steel, made for use on trucks with heavy duty chassis and a larger torsion bar.
  • ATTENTION: This torsion bar unloading tool can only be used with hand wrench, do not use the impact driver. Grease the threads before using and get the front tires completely off the ground.
Check Stock

scottchen PRO Garage Door Safety Cable for Extension Springs Galvanized Carbon Steel 8'8\ x 1/8\ 7x7 Strands - 1Pair

  • DESCRIPTION: Garage Door Torsion Spring For 7-8 Feet High Door (0.262x2x35) (Black/Right - Red/Left).
  • MATERIAL: Fabricated with high carbon ASTM 229 Class II Oil-Tempered Wire..
  • EXECUTION FACTORS: Spring Rate - Maximum deflection - Maximum load - Wind specifications..
  • CONE TYPE: Diamond cones, stationary cones..
  • CATEGORY: Garage Door Torsion Springs - Garage Door Hardware. Replacement spring(s) must match broken spring(s) measurements. Simple installation, just install new or replace old, rusty springs quickly (professional installation recommended).
Check Stock

Extra Heavy Duty Garage Door Pulley - 3 INCH 200LB

  • Cable and Pulley Replacement Kit for Torsion Spring Doors up to 12 Feet Tall & Extension Spring Door to 9 Feet Tall..
  • TWO PAIRS OF LONG CABLES, 1/8"x 168 inches 7x19 Strand [7 x 19(7 strands-19 wires per strand)], 3/32" x 156 inches 7x7 Strand, FUSION CUT ENDS.
  • Each pulley is 200 lb. Load rated for doors up to 400 lbs. The 3/32" cables with 7 x 7 strand has a rating of 960 pounds, The 1/8" cables with 7 x 19 strand and rated at 2000 pounds..
  • Design to work on a multitude of doors with torsion springs or extension spring setup..
  • Package included: 2 Heavy Duty Pulleys for front or rear, 2 Clevis Forks, 2 Bolts, 2 Nuts, AND 4 Cables..
Check Stock

OMT Torsion Bar Unloading Tool, Heavy Duty Torsion Key Tool with C Frame and 0.9" Dia Threaded Rod, Torsion Bar Tool Compatible with Chevy Silverado GMC Dodge Cadillac More

  • TORSION BAR REMOVER: Orion Motor Tech's torsion bar removal tool is the ideal assistant to help you remove and replace your vehicle’s torsion bar.
  • it removes the spring from the suspension system to accommodate easy parts replacement and keep your car in optimal condition.
  • WIDE COMPATIBILITY: This torsion key tool easily removes or holds the torsion bar in place on a wide variety of vehicles, compatible with a range of models from Chevy, GMC, Dodge, Cadillac, and more (see all compatible models below).
  • EFFICIENT TOOL: Our torsion bar removal tool consists of a C frame with a 6.3 inch (16 cm) opening that easily holds the torsion bar in place and a 7.1 inch long, 0.9 inch (22 mm) diameter threaded shaft that makes quick and easy work of your suspension jobs.
  • DURABLE CONSTRUCTION: This car tool is constructed from high quality AISI 1045 medium carbon steel.
  • the hammered finish offers incredible durability and corrosion proof experience to let you enjoy years of dependable use.
  • and the 1 inch hex drive bolt offers compatibility with your standard hand wrench.
Check Stock

Prime-Line GD 12234 Garage Door Torsion Spring, .250 inch x 2 inch x 32 inch, Green, Right Hand Wind

  • Torsion Springs Single Left 243 x 2" with Winding Rods Center Steel Bearing.
  • Includes spring left, steel bearing and winding bars.
  • Springs are made in the USA using Oil Tempered.
  • You will receive only ONE (1) bushing or bearing with a pair of springs.
Check Stock

Orion Motor Tech Torsion Bar Unloading Tool, Heavy Duty Torsion Key Tool with C Frame and 0.9" Dia Threaded Rod, Torsion Bar Tool Compatible with Chevy Silverado GMC Dodge Cadillac More

  • TORSION BAR REMOVER: Orion Motor Tech's torsion bar removal tool is the ideal assistant to help you remove and replace your vehicle’s torsion bar.
  • it removes the spring from the suspension system to accommodate easy parts replacement and keep your car in optimal condition.
  • WIDE COMPATIBILITY: This torsion key tool easily removes or holds the torsion bar in place on a wide variety of vehicles, compatible with a range of models from Chevy, GMC, Dodge, Cadillac, and more (see all compatible models below).
  • EFFICIENT TOOL: Our torsion bar removal tool consists of a C frame with a 6.3 inch (16 cm) opening that easily holds the torsion bar in place and a 7.1 inch long, 0.9 inch (22 mm) diameter threaded shaft that makes quick and easy work of your suspension jobs.
  • DURABLE CONSTRUCTION: This car tool is constructed from high quality AISI 1045 medium carbon steel.
  • the hammered finish offers incredible durability and corrosion proof experience to let you enjoy years of dependable use.
  • and the 1 inch hex drive bolt offers compatibility with your standard hand wrench.
Check Stock

Impactspring Professional Garage Door Torsion Spring Repair Set(2’’Inner Diameter),Pair of Oil-impregnated Blackened Springs with Winding Bars and Gloves,More Than 10000 Cycles(.250’’X2’’X29’’)

  • Application:Use our high quality garage door torsion springs to replace old broken garage door springs.Having the experience of installing torsion springs can save you a lot of money..
  • Choose the Correct Size:Measure 20 coils to determine spring wire gauge.Please measure the wire diameter, outer diameter and length of the spring when the spring is not stressed..
  • High Quality:The spring part is made of heat-treated spring steel and black coated.The lightweight aluminum stationary & winding cones are more tightly connected to the bracket and can reduce the wear of the spring..
  • For Your Convenience:A pair of 16’’ winding bars and a pair of gloves are included in the package, so you can start installing immediately after receiving the product..
  • Multiple Sizes:The size of this spring is .250’’ wire size x 2’’ inside dimension x 29’’ length.We provide 11 different specifications of door springs(2’’Inner Diameter),please make sure that the wire diameter, inner diameter, and length of the spring you choose are exactly the same as the original spring used..
Check Stock

Impactspring Professional Garage Door Torsion Spring Repair Set(1.75’’Inner Diameter),Pair of Oil-impregnated Blackened Springs with Winding Bars and Gloves,More Than 10000 Cycles(.225’’X1.75’’X32’’)

  • Application:Use our high quality garage door torsion springs to replace old broken garage door springs.Having the experience of installing torsion springs can save you a lot of money..
  • Choose the Correct Size:Measure 20 coils to determine spring wire gauge.Please measure the wire diameter, outer diameter and length of the spring when the spring is not stressed..
  • High Quality:The spring part is made of heat-treated spring steel and black coated.The lightweight aluminum stationary & winding cones are more tightly connected to the bracket and can reduce the wear of the spring..
  • For Your Convenience:A pair of 16’’ winding bars and a pair of gloves are included in the package, so you can start installing immediately after receiving the product..
  • Multiple Sizes:The size of this spring is .225’’ wire size x 1.75’’ inside dimension x 32’’ length.We provide 11 different specifications of door springs(2’’Inner Diameter),please make sure that the wire diameter, inner diameter, and length of the spring you choose are exactly the same as the original spring used..
Check Stock