Categories

Best Single Wires

360 Pieces Multicolored Breadboard Jumper Wire Dupont Wire Ribbon Cables Kit 30CM 20CM 10CM 40 Pin Male to Female, 40 Pin Male to Male, 40 Pin Female to Female, for Arduino and Raspberry Pi

  • VARIOUS USAGE SCENARIOS: These wires come in a 40-pin ribbon cable, which can be separated into single wire or multi - strand combination for various usages. Also, different type of wires to support different usage: (30.5cm/12.0in.
  • EASY-TO-USAGE: The 10 colour repeat clear carrier colour coded 40 PIN ribbon cable, easy to identify each wires in your DIY or prototype.
  • 2.54 Pitch Male or female connector at end of each wires, will easy to support different connection: bread board hole, pin header, female header or other connectors with different pins..
  • WIDE USEAGE: For Use In Development and Prototyping with Arduino, Raspberry Pi, Single Board Computers, Electronics Modules, LoveRPi Kits, and more.
  • PREMIUM QUALITY: We use qualified copper tinned & PVC insulation to manufacture these high-quality cables. It provides a simple, quick and cost-effective solution to mass termination. They also have space and weight saving advantages over other wiring methods and are ideal for use on computers, peripherals, and interface units, audio and digital equipment..
  • MULTIPLE MODEL: This Jump Wire Set includes totally 360 wires to support multiple usage, include three kinds of wires length: 30.5cm....
Check Stock

Electric Water Boiler

  • Quick & Accurate Network Cable Collation: The cable tracer can search for wires in various applications, including buried wires, single stranded wires, broken wires, etc. Suitable for wires, fixed telephones, coaxial cables, automotive cables, etc. Note: our electrical circuit tracer is not suitable for live circuit!.
  • Flexible Tone Generator Wire Tracer: The wire toner tracer receiver is equipped with an adjustable sensitivity dial, which allows you to accurately trace a wire in congested places. And also, you can use the wire toner to find a intermittent circuit problem. Just flexing wires or connectors, and then you will hear that there is a change in the receiver tone..
  • Short & Open Finder Circuit Tester: In CONT mode, you can check the short circuit and open circuit in the line. The attached RJ11 connector allows you to easily test the telephone system (in CONT mode, you need to use two alligator clips)..
  • Tone Tracing Probe Kit: In TONE mode, you can quickly track cables passing through ceilings, under floors, interior wall barriers, etc., without the risk of not knowing the exact location of the wires (only one alligator clip is used in TONE mode)..
  • No Risk : Our wire tester electrical tool has One-year Warranty! And, we are always put our customers....
Check Stock

Drawing With Static Electricity

  • Quick & Accurate Network Cable Collation: The cable tracer can search for wires in various applications, including buried wires, single stranded wires, broken wires, etc. Suitable for wires, fixed telephones, coaxial cables, automotive cables, etc. Note: our electrical circuit tracer is not suitable for live circuit!.
  • Flexible Tone Generator Wire Tracer: The wire toner tracer receiver is equipped with an adjustable sensitivity dial, which allows you to accurately trace a wire in congested places. And also, you can use the wire toner to find a intermittent circuit problem. Just flexing wires or connectors, and then you will hear that there is a change in the receiver tone..
  • Short & Open Finder Circuit Tester: In CONT mode, you can check the short circuit and open circuit in the line. The attached RJ11 connector allows you to easily test the telephone system (in CONT mode, you need to use two alligator clips)..
  • Tone Tracing Probe Kit: In TONE mode, you can quickly track cables passing through ceilings, under floors, interior wall barriers, etc., without the risk of not knowing the exact location of the wires (only one alligator clip is used in TONE mode)..
  • No Risk : Our wire tester electrical tool has One-year Warranty! And, we are always put our customers....
Check Stock

3 Wire Dump Trailer Remote Control Switch for 12V DC Single Acting Hydraulic Pump Power Supply Unit Dump Trailer Fit for Lift Unloading

  • [Feature] 3 wire single acting hydraulic power unit 12V DC, small area, use widely, easy to carry..
  • [Wide Use] Fits most single-acting hydraulic pumps power units..
  • [Reasonable Design] 2-button pendant control is most commonly used as a dump trailer remote, which is built of a high-impact, highly visible plastic....
  • [Wire Connection] For 3 wires (single -acting) dump trailer control: Use wire with round metal head connect to lower valve. Use wire with circle....
  • [Package Include] Comes with Mounting Holster +Magnetic Back + 3 Wires--Red (power) ,Black(down) ,Blue(start). Notice: If you have any problems,pls....
Check Stock

INTBUYING Cable Wire Stripping Machine, Electric Automatic Wire Stripper Machine, Waste Aluminum Scrap Copper Cable Strip Peeler, 11Channels 10 Blades for Dia 0.06-1.5in Scrap Cable Recycling

  • 110V 370W automatic electric wire stripper machine SMS-38, whole size is 24.8x11.81x15.16 inch. It is easy to operate and convenient to carry, it can process single core copper wire, twin cores copper wire..
  • Wire stripping range is Dia 1.5- 38mm (0.06-1.5inch) and make sure the cables diameter are similar with the feeding holes, large wires in large feeding holes, small wires in small feeding holes, flat wires in flat feeding holes..
  • Equipped with 11Channels 10 blades for easy access to any cable or wire from the smallest to the largest. Comparing the cables/wires’ diameters with the feeding holes on the machine, feeding the cables/wires one piece at one time..
  • If the cables wires are blocked in the axises, please check: If the springs on the press wheels are too tight, loose them.
  • There are too much oil on the cables/wires, please wipe it..
  • Automatic wire strippers lead to fast stripping speed, fixed machine position, safe and reliable use.Before feeding the cables/wires, please cut off the head of the cables/wires, to avoid gaps caused to the blades..
Check Stock

LED Light Bar Switch ON/Off Laser Waterproof Marine Rocker Switch 12V 20A 24V 10A 5 Pin Toggle Switch Blue Lighted LED Rocker Switch for Car Boat ATV UTV RZR with Jumper Wires

  • Function: Laser ON/OFF 5 pin rocker switch SPST (single pole single throw) design dual LED lighted rocker switch 12v with jumper wires..
  • 10A 24V DC, heavy duty 12 volt rocker switch. Waterproof Rocker Switch Mounting Hole Size: 37MM x 21MM (about 1.46" x 0.83")..
  • Dual LED: This led light bar switch is dual LED illuminated design, the light of word part light up when dash light ON, and the light of pattern part light up when switch ON..
  • Easy Disconnect Wire: The wires that will come with the led light bar rocker switch is easy disconnect jumper wires, it will be much easier to remove the wire from the 12v rocker switch while pressing the bulge on the connector of wires..
  • Waterproof: LED rocker switch with IP65 waterproof, weatherproof and dustproof design, which makes the led switch become more reliable and safer in extreme environment, suitable for UTV, ATV, Polaris Ranger, automotive, Can am, marine boat, etc..
Check Stock

CARLING RSCA201-VB-B-9-V SWITCHES, ROCKER, SPST, 20A, 125V, BLACK (1 piece)

  • 5 Pins ON-OFF SPST(single pole single throw) green led rocker switch,easy installation with the equipped wires..
  • Rated at 20amp/12v DC and 10amp/24v DC,mounting hole size is 37.2 mm x 21.2 mm..
  • The switch is made of high-quality metal and ABS plastics, and the cover adopted the Laser-etched workmanship which ensure long lasting durability of the logo..
  • Suitable for all 12 / 24v car battery installation, such as cars , motorcycles , buses, boats , RVs , trailers, etc.
  • The package included : 1 X 5 pin rocker switch, 1 X jumper wires set..
Check Stock

GenBasic 40 Piece Male to Female 4 Inch Solderless Ribbon Dupont-Compatible Jumper Wires for Breadboard Prototyping

  • Male to Female AWG 26 Solderless Ribbon Jumper Wires for Breadboard Prototyping.
  • 40 x 10cm (4 Inches) Parallel Adjoined Wires.
  • Color Coded with 10 Colors and 4 Wires of the Same Color in Each Length.
  • Insulated Wire Casing with 2.54 mm Pitch DuPont-Compatible Connectors.
  • For Use in Development and Prototyping with Arduino, Raspberry Pi, Single Board Computers, LoveRPi Kits, and more.
Check Stock

GenBasic 80 Piece Male to Female 4 and 8 Inch Solderless Ribbon Dupont-Compatible Jumper Wires for Breadboard Prototyping

  • Male to Female AWG 26 Solderless Ribbon Jumper Wires for Breadboard Prototyping.
  • 40 x 10cm (4 Inches) and 40 x 20cm (8 Inches) for 80 Total Wires.
  • Color Coded with 10 Colors and 4 Wires of the Same Color in Each Length.
  • Insulated Wire Casing with 2.54 mm Pitch DuPont-Compatible Connectors.
  • For Use in Development and Prototyping with Arduino, Raspberry Pi, Single Board Computers, LoveRPi Kits, and more.
Check Stock

Capri Tools 20011 Automatic Wire Stripper and Cutter

  • This automatic wire stripper has a narrow profile, allowing it to access tight areas.
  • The stripping blades automatically self-adjust to different gauges.
  • Fast compound consistent wire stripping action.
  • Grips and strips with a single squeezing motion.
  • Strips wires 24-10 AWG and cuts wires up to 12 AWG with built-in wire cutter.
Check Stock

Ultima Single Fire Ignition Kit 53-660

  • Will work on Evolution Sportsters & all nose cone type Shovelhead & Evolution Big Twins motors from 1970 to 1999..
  • Rotor, Single Fire Coil, Control Module and Plug Wires included.
  • Ignition kit includes single fire coil that puts out over 30,000 volts with fast rise times and.
  • Intelligent overvoltage / overcurrent protection..
Check Stock

Amazon Basics Speaker Connector Banana Plugs - 6 pairs

  • 6 pairs of banana plugs (12 plugs total) for easily installing speakers.
  • Self-crimping teeth for easy installation.
  • Durable 24k gold plating provides corrosion protection and ensures high-quality audio.
  • Female connection on base of each plug for connecting multiple speakers from a single output.
  • includes black and red rings for color coding the wires.
Check Stock

Amazon Basics Speaker Connector Banana Plugs - 12 pairs

  • 12 pairs of banana plugs (24 plugs total) for easily installing speakers.
  • Self-crimping teeth for easy installation.
  • Durable 24k gold plating provides corrosion protection and ensures high-quality audio.
  • Female connection on base of each plug for connecting multiple speakers from a single output.
  • includes black and red rings for color coding the wires.
Check Stock