Categories

Best Single direction Thrust Ball Bearing

Rannb 51202 Thrust Ball Bearing Axial Ball Thrust Ball Bearings 12mm x 32mm x 15mm - Pack of 3

  • 【Material】The 51202 Thrust Ball Bearing is made of Chromium Steel (GCr15),durability and resistance to deformity under loads..
  • 【Dimension】Bore Diameter : 15mm/0.59".
  • 【Application】Designed for low speed operation and axial loads only..
  • 【Easy to Use】The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections..
  • 【Package Content】3pcs x 51202 Thrust Ball Bearing.
Check Stock

XMHF 51203 Thrust Bearing 17x35x12mm Thrust Single Ball Row Bearings 3Pcs

  • Dimensions: 17mm x 35mm x 12mm/0.67”x1.4”x0.47”.
  • Package Content: 3 x Thrust Ball Bearing.
Check Stock

XMHF 4pcs 51204 Carbon Steel Axial Thrust Ball Bearing 20mm x 40mm x 14mm

  • Package Content : 4x Thrust Ball Bearing.
Check Stock

Bettomshin 2Pcs 51100 Thrust Ball Bearings with Washers 10mm Bore 24mm OD 9mm Width GCr15 Thrust Bearing for Wind Spinners Slicers CNC Retrofits

  • 【Parameter】Type: Thrust Ball Bearing.
  • 【Material】Made of GCr15, durability and resistance to deformity under loads, have great wear-resistant, high temperature resistance and high hardness..
  • 【Capability】High precision, fast speed, long life, uniformly load distributed, can withstand high thrust loads. They incorporate logarithmic roller and raceway profiles with a optimized surface finish for ultimate roller to flange contact..
  • 【Features】The separable components of thrust ball bearings are interchangeable. Low noise and long service life, easy to maintain. Keep the bearing working environment clean and bearing lubricated in time..
  • 【Applications】Can be used for jack, pump, rotating applications, machine tools ect..
Check Stock

MRC R4AFF Small Ball Bearing, Double Shielded, No Snap Ring, Inch, 1/4\ ID, 3/4\ OD, 27000 rpm Max RPM, 261 pounds Static Load Capacity, 632 pounds Dynamic Load Capacity

  • Well made: the needle roller thrust bearing has fine workmanship and a nice stability, which can work well and operate efficiently.
  • Notes: it only bear axial load in one direction.
  • Package includes: you will receive 10 sets thrust needle roller bearings with washers, 3 pieces of each set, a total of 30 pieces, sufficient quantity to meet and satisfy your in daily life.
  • Reliable material: the thrust needle roller bearing is made of steel, has good heat tolerance under heavy load, reliable to use, which also has a nice load carrying capacity and stiffness, with a smooth surface, helping it work well.
  • Easy to use: featuring a steel cage guide rail and evenly distributed rollers, the thrust needle roller bearing take less space, reduce friction, vibration and noise, which is convenient to use.
  • It also can be applied as a raceway between the faces of adjacent machine components by combining 2 thrust washers.
  • Fit for: thrust bearing can be widely applicable in your daily life, such as minibike, agricultural machinery, conveying equipment, trailers, robots, elevators, rolling mills and so on.
Check Stock

10 Sets Thrust Needle Roller Bearings with Washers 0.75 Inch Bore 1.25 Inch OD Industrial Bearing with Nice Load Carrying Capacity and Stiffness NTA1220 2TRA Thrust Needle Roller Bearing

  • Well made: the needle roller thrust bearing has fine workmanship and a nice stability, which can work well and operate efficiently.
  • Notes: it only bear axial load in one direction.
  • Package includes: you will receive 10 sets thrust needle roller bearings with washers, 3 pieces of each set, a total of 30 pieces, sufficient quantity to meet and satisfy your in daily life.
  • Reliable material: the thrust needle roller bearing is made of steel, has good heat tolerance under heavy load, reliable to use, which also has a nice load carrying capacity and stiffness, with a smooth surface, helping it work well.
  • Easy to use: featuring a steel cage guide rail and evenly distributed rollers, the thrust needle roller bearing take less space, reduce friction, vibration and noise, which is convenient to use.
  • It also can be applied as a raceway between the faces of adjacent machine components by combining 2 thrust washers.
  • Fit for: thrust bearing can be widely applicable in your daily life, such as minibike, agricultural machinery, conveying equipment, trailers, robots, elevators, rolling mills and so on.
Check Stock

DELTA-Milwaukee Double Duty 930, 950 & 46-230 11" Wood Lathe with Steel or Cast Iron Bed Operator & Parts Manual

  • Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals and flingers on both sides of the bearing keep lubricant in and contaminants out.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

SKF F2B 100-RM Ball Bearing Flange Unit, 2 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 1\ Bore, 3-7/8\ Bolt Hole Spacing, 3150lbf Dynamic Load Capacity

  • Two-bolt flange-style housing for a ready-to-mount installation where surface and guided shaft are perpendicular.
  • Single-row deep groove ball bearing insert accommodates misalignments between the shaft and the housing.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals on both sides of the bearing keep lubricant in and contaminants out.
Check Stock

MOCHU 725 725C/P5 5x16x5 Angular Contact Ball Bearing, ABEC-5, 15° Contact Angle, Metric, 5mm ID, 16mm OD, 5mm Width, Single Row, Open

  • Double-row angular contact ball bearing, supporting moderate combined radial and bidirectional thrust loads.
  • Ball contact angle of 20 degrees relative to the inner and outer raceways increases thrust load capacity.
  • Rubber seals on both sides of the bearing to keep lubricant in and contaminants out.
  • Pressed steel cage evenly spaces balls for reduced friction, vibration, and noise.
  • Normal axial internal clearance for applications where thermal expansion is not a factor.
Check Stock

Accusize Industrial Tools MT3 Precision Medium Duty Live Center, Overall Length 6.69'', 0537-6437

  • Precision Medium Duty Live Center For General Purpose On Manual Engine Lathe.
  • The live center has a combination of deep groove ball bearing, thrust ball bearing and needle bearing..
  • The anti-dust seal can prevent cutting fluid and dust from entering into the center bearing.
  • The 60° rotating spindle is made from carbon alloy steel with heat treatment to HRC 58±2 for high rigidity and wears resistance.
Check Stock

SKF F2B 108-RM Ball Bearing Flange Unit, 2 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 1-1/2\ Bore, 5-21/32\ Bolt Hole Spacing, 6900lbf Dynamic Load Capacity

  • Two-bolt flange-style housing for a ready-to-mount installation where surface and guided shaft are perpendicular.
  • Single-row deep groove ball bearing insert accommodates misalignments between the shaft and the housing.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals on both sides of the bearing keep lubricant in and contaminants out.
Check Stock

3007715/98001.175x25 Spline Gray

  • Low friction: The ball does not cycle and can achieve rolling motion with minimal friction..
  • High precision linear movement: as part of shaft and nut, the clearance in rotation direction can be adjusted to ensure accuracy..
  • Transferable rotating torque: the ball rolls on the ball groove of the spline shaft and moves in a straight line while transferring the rotating torque..
  • Compact design: even a single shaft mechanism can move in a straight line, while keeping the nut in the direction of rotation without deviation..
  • Large bearing capacity and long service life: Because the rolling surface adopts r-shaped ball groove matching with the ball diameter, the contact area is large, the bearing capacity is strong and the service life is long..
Check Stock

SKF F4B 100-RM Ball Bearing Flange Unit, 4 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 1\ Bore, 2-3/4\ Bolt Hole Spacing, 3150lbf Dynamic Load Capacity

  • Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals on both sides of the bearing keep lubricant in and contaminants out.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock