Categories

Best Single flute End Mills

HHIP 3600-0056 End Mill Grinding Fixture (Angle) 5C

  • Solid negative ball stops with 15 degrees spacing fast & easy set-ups..
  • Can be used for grinding 2-3-4-6-8 and 12 flute end mills.
  • This fixture takes 5C round collets for grinding end mill 1/16" ~ 1-1/8" .Clearance & relief angels are built into the base.
  • Shell mills can easily be held with Straight Shank arbors.
  • Clearance & relief angels are built into the base.
Check Stock

Kodiak Cutting Tools L3-OFFT-21LF USA Made Micrograin Carbide Ball Nose End Mill Set, 4 Flute, 1/8\ to 1/2\ (Pack of 6)

  • Contains Kodiak Cutting Tools brand premium quality USA made ball nose solid carbide end mills.
  • 4 flute ball nose end mills are center cutting and made from premium sub-micrograin carbide.
  • Stub length end mills for extra rigidity.
  • Fitted wood block stand included and each size comes in a marked plastic tube.
  • Contains 1pc of each diameter: 1/8, 3/16, 1/4, 5/16, 3/8 and 1/2.
Check Stock

HHIP 3900-1005 5-Piece R8 End Mill Holder Set, 3/16-3/4'

  • 5 PC SET 3/16, 3/8, 1/2, 5/8, 3/4" DRAWBAR END THREAD: 7/16" -20.
  • Hardened and ground For Bridgeport type milling machines.
  • Hardened and ground. For double and single end mills (single end mils only for sizes over 5/8").
  • 5 PC SET For Bridgeport type milling machines. DRAWBAR END THREAD: 7/16" -20.
  • For double and single end mills (single end mils only for sizes over 5/8").
Check Stock

YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 3\ Overall Length, 0.125\ Cutting Diameter, 0.125\ Shank Diameter

  • Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
  • Four flutes produce a better finish than fewer flutes.
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.
Check Stock

YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 4\ Overall Length, 0.1875\ Cutting Diameter, 0.1875\ Shank Diameter

  • Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
  • Four flutes produce a better finish than fewer flutes.
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.
Check Stock

SpeTool 5Pcs 1/8 inch Aluminum End Mills 2 Flutes CNC Spiral Router Bits Non-Ferrous Metal Upcut 1-1/2 inches Long for Woodworking Cutting

  • 【SPECIFICATIONS】End mills for aluminum with 1/8” shank, 1/8” cutting diameter, 7/16” cutting length and 1-1/2” total length, 2 flutes with flat top, 5 pieces included in the package..
  • 【HIGH PERFOMANCE】These end mills for aluminum are designed for perfect surface finish because of the effective chip removal. With the long service life they are suitable for side milling, end milling, finish machining, etc..
  • 【HIGH PRECISION】High precision grinding and polishing, high resistance to abrasion and temperature resistance, good rigidity, high durability and not easy to break..
  • 【ALUMINUM APPLICATIONS】Best for processing aluminum 6061,7075 etc. Also suitable for non-ferrous metal, plywood, OAK, MDF, and Any Hardwood Working..
  • 【WIDELY USED】These aluminum end mills suit for CNC routers, any brands of plunge routers with 1/8" collet..
Check Stock

SpeTool 1/4 End Mill for Aluminum 3 Flutes CNC Spiral Router Bit for Aluminum Cut Non-Ferrous Metal Upcut 2.5 inches Long 5 Pieces

  • 【SPECIFICATIONS】End mills for aluminum with 1/4” shank, 1/4” cutting diameter, 3/4” cutting length and 2-1/2” total length, 3 flutes with flat top, 5 pieces included in the package..
  • 【HIGH PERFOMANCE】These end mills for aluminum are designed for perfect surface finish because of the effective chip removal. With the long service life they are suitable for side milling, end milling, finish machining, etc..
  • 【HIGH PRECISION】High precision grinding and polishing, high resistance to abrasion and temperature resistance, good rigidity, high durability and not easy to break..
  • 【ALUMINUM APPLICATIONS】Best for processing aluminum 6061,7075 etc. Also suitable for non-ferrous metal, plywood, OAK, MDF, and Any Hardwood Working..
  • 【WIDELY USED】These aluminum end mills suit for CNC routers, and Makita, Bosch, or any brands of plunge routers with 1/4" collet..
Check Stock

SpeTool 1/8 End Mills for Aluminum 3 Flutes CNC Spiral Router Bits for Aluminum Cut Non-Ferrous Metal Upcut 1.5 inches Long 5 Pieces

  • 【SPECIFICATIONS】End mills for aluminum with 1/8” shank, 1/8” cutting diameter, 7/16” cutting length and 1-1/2” total length, 3 flutes with flat top, 5 pieces included in the package..
  • 【HIGH PERFOMANCE】These end mills for aluminum are designed for perfect surface finish because of the effective chip removal. With the long service life they are suitable for side milling, end milling, finish machining, etc..
  • 【HIGH PRECISION】High precision grinding and polishing, high resistance to abrasion and temperature resistance, good rigidity, high durability and not easy to break..
  • 【ALUMINUM APPLICATIONS】Best for processing aluminum 6061,7075 etc. Also suitable for non-ferrous metal, plywood, OAK, MDF, and Any Hardwood Working..
  • 【WIDELY USED】These aluminum end mills suit for CNC routers, and Makita, Bosch, or any brands of plunge routers with 1/8" collet..
Check Stock

YG-1 - 55901 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 6\ Overall Length, 0.25\ Cutting Diameter, 0.25\ Shank Diameter

  • Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
  • Four flutes produce a better finish than fewer flutes.
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.
Check Stock

20 PC Titanium Nitride Coated End Mill Set - 4 & 2 Flute Tin End Mill for Milling Machines

  • Includes both 10pc- 2 flute and 10pc - 4 flute end mills.
Check Stock

YG1 E5G97911 | 1/4x1/4x5/8x2-1/2 AluPwr 3FL HP Carbide Corner Radius End Mill

  • Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life.
  • Four flutes produce a better finish than fewer flutes.
  • Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures.
  • Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds.
  • Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.
Check Stock

Niagara Cutter 17005489 Carbide Square Nose End Mill, Inch, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 4' Overall Length, 0.375' Cutting Diameter, 0.375' Shank Diameter

  • 4 flute design for creating finer finishes and a higher metal removal rate.
  • General purpose end mill for working on all types of materials.
  • Made of extra-fine grade carbide for ultra high transverse rupture strength.
  • Uncoated end mills feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Center Cutting End Mills are designed with "End Teeth" making these ideal for Slotting and Cavity applications.
Check Stock

Niagara Cutter 17011737 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, Uncoated (Bright) Finish, Finishing Cut, 30 Degree Helix, 6 Flutes, 3.25' Overall Length, 0.500' Cutting Diameter, 0.500' Shank Diameter

  • fewer flutes have more chip-carrying capacity and more flutes produce a finer finish.
  • Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel.
  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.
  • Square nose end mills (also called square end) create sharp, unrounded cuts.
  • Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.
Check Stock