Best Single phase Bridge Rectifier Module
Bridge Rectifier, 3Pcs AC to DC Power Conversion Module, 1N4007 Full Bridge Rectifier Filter Power Supply Module for Model Train Railroad LED (Input AC 6V-16V (capacitance 25V1000UF))
- AC to DC power converter module, 1N4007 full wave bridge rectifier filter. Module size: 31x14x20mm/1.22x0.55x0.78inch, wire Length: 90mm/3.54inch..
- This product is a streamlined rectifier filter module, widely used in small rectifier output filter, mainly used in the power requirements of the electrical is not very high..
- The power module design can be put into a smaller small electrical box, the circuit Board above the design of power indicator light, easy to turn on the power supply can be intuitive to know the power status..
- Rectified output voltage: output = input x1.414 . Example: input 12V AC, then the output 12x1.414 = 16.968V, which is the calculated result of no-load voltage, only a reference, the actual deviation..
- Please NOTE: plug-in products, manual soldering, inconsistent capacitor pin height is a normal phenomenon. AC input voltage [6V-16V] (capacitance 25V1000UF).
- AC input voltage [6V-32V] (capacitance 50V470UF), please seclect the one you need..
Check Stock1-600MHz RF Power Meter,Jectse Digital LCD RF Power Meter -75~16 dBm 1-600MHz Radio Frequency Attenuation Value
- Repetitive Peak Reverse Voltage(AC):1200V.
- 【Material】 - The rectifier diode is made of aluminum, with large current capacity, good heat dissipation, and low voltage.
- 【Features】 - The two-pole rectifier has low power loss, low reverse leakage current, electrically isolated metal shell, which can maximize heat dissipation.
- 【Advantage】 - This is a high-quality two-pole rectifier used to convert AC input to DC output, which can be used in a variety of applications.
- 【Application】 - This rectifier is used in the rectification circuit of electrochemistry, electrolysis, electrolysis, traction, switchgear operation power supply, etc.
Check StockSQL 100 amp 1600V 3 phase AC to DC High Power Rectifier Silicon Full Wave Diode Bridge Rectifier Module 5 Terminal with Heatsink
- High quality bridge rectifiers used for conversion of an alternating current input into a direct current output.
- Well welded structure with good temperature and power cycle ability ensures a more stable performance.
- Designed for 3 phase rectification, output DC current is 100A.
- It has a large over-current capacity, good heat dissipation.
- This high power bridge rectifier can be widely used for power supply.
Check StockRF Switch Board, 3‑5V RF Switch Module Single Pole Double Throw Board 50Ohms Input Output Impedance SMA Interfac(HMC849)
- New M50100TB1600 Crydom Diode Rectifier Bridge Module Original.
Check StockAOICRIE 4PCS L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper for Arduino
- L298N as Main driver chip L298N, strong driving ability, strong anti-interference, low calorific value, afterflow diode protection, more stable and reliable for Arduino projects, Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability..
- Double H bridge design, can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors, high efficient, To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage..
- Driving DC motor Because the module is drived by double H bridge,it can drive two motors simultaneously.Input the following driving timing from IN1-IN4 then the speed and direction of the stepper motor can be controlled..
- Easy to Use No assembly required. This L298N board comes ready to go. Just wire up motors and power, easy to use..
- Wide Usage Great for DIY Smart Car Robot Power MEGA R3 for Mega2560 Duemilanove, if driving voltage is more than 12V, use external standard 5volt TTL outputs to switch the H-bridge circuits..
Check StockAOICRIE 5Pcs L298N Dual H Bridge Stepper Motor Driver Board For Arduino (5pcs)
- 【Package Included】- 2pcs L298N Motor Driver Controller Board Modules..
- 【Item Condition】- Drive voltage 5V-35V, high working power to 46V. Large current can reach 3A MAX and continue current is 2A. Power to 25w.(NOTE: To avoid damage, please use an external 5V logic supply when using more than 12V driving voltage.).
- 【High Quality】- Use L298N as the main driving chip, so the module has such features as strong driving ability, strong anti-interference and low calorific value. And it also use large-capacity filter capacitor and diode with freewheeling protection function, thereby improve the reliability of module..
- 【High Efficiency】- Dual-channel H-bridge design, can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors..
- 【Easy of Use】- No assembly required. This L298N board comes ready to go. Just wire up motors and power, this thing will work wonders..
Check StockInsteon Garage Door Control & Status Kit, for Standard 2-Wire Button Controlled Garage Motors, 74551 - Insteon Hub Required for Smarthphone Control and Alerts
- Remotely monitor and control (open and close) your garage door using any Insteon controller (sold separately).
- Includes sensors that provide status on whether the garage door is open or closed.
- Compatible with traditional 2-wire garage openers only - if your garage control button features a display panel, this kit is not compatible.
- Can be used without an Insteon Hub (2245-222) - included Insteon I/O Linc module (2450) communicates over powerline only, which may cause issues if you are trying to remotely operate your garage from Insteon devices on a different electrical phase (circuit) or from an Insteon Mini Remote.
- Recommend adding a Range Extender (2992-222) on the same phase to bridge the I/O Linc module with Insteon RF-only or Dual-band devices.
Check StockCordless Engraving Tool, Easy Operation Low Noise Overload Protection Electric Grinding Pen Auto Power Off for Grinding
- max. Average forward rectified current : 35A.
- Max. Recurrent peak reverse Voltage : 1000V.
- Operating temperature range : -55-125â°c.
- terminal Size : 6. 2 x 16 mm / 0. 24" x 0. 63" (w*l).
- Dimension : 28 x 28 x 11 mm / 1. 1" x 1. 1" x 0. 43" (l*w*t).
Check StockCumberland Swan/Vi-Jon 1000032061 Witch Hazel (Pack of 12)
- USED FOR-- High quality generator controller is integrated with digital, intelligent, and network technology for the automation and monitoring system of a single generator set.
- MULTIFUNCTION-- Realize the automatic start/stop, data measurement, alarm protection and "three remote" functions of the generator set. Speed sensor frequency range: 1Hz-10KHz, speed sensor voltage range: 0.5V-70V.
- WITH LARGE-SCREEN-- The controller adopts large-screen liquid crystal (LCD) display, Chinese, English, Spanish and Russian optional interface operation, simple operation and reliable operation.
- WIDE APPLICATION-- Generator controller is suitable for 3?phase 4?wire, 3?phase 3?wire, single?phase 2?wire, 2?phase 3?wire (120V/240V) power supply 50Hz/60Hz system.
- GOOD REPLACEMENT-- This generator controller module is a good replacement for your old or broken one, comes with 4pcs brackets, easy to install.
Check Stock8PCS L298N Motor Drive Controller Board Dual H Bridge DC Robot Stepper Motor Compatible with Ardu-ino Electric Projects, Smart Car Robot
- Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip, Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors..
- The L298N driver module, using L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface, you can chip circuitry to 5V power supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential..
- Terminal driver part of the supply area VMS: +5V ~ +35V.
- Drive part of the peak current Io: 2A / Bridge.
- Logical part of the terminal power supply range Vss :4.5-5 .5V.
- Logical part of the operating current range: 0 ~ 36mA.
- The control signal input voltage range: 4.5-5.5V low 0V high.
- To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage.
- High working power to 46v, large current can reach 3A MAX and continue current is 2A, power to 25w..
- Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability, large capacity filter capacitance,afterflow protection diode, more stable and reliable..
Check StockMELIFE 5Pack L298N Stepper Motor Driver Controller Board Dual H Bridge Module for Arduino Smart Car Power UNO MEGA R3 Mega2560
- Main driver chip L298N, strong driving ability, strong anti-interference, low calorific value, afterflow diode protection, more stable and reliable for Arduino projects.
- Double H bridge design, can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors, high efficient.
- No assembly required. This L298N board comes ready to go. Just wire up motors and power, easy to use.
- External size 43*43*27mm / 1.69*1.69*1.06 inch, voltage 5V-35V, drive current 2A (Max single bridge).
- Great for Arduino DIY Smart Car Robot Power UNO MEGA R3 Mega2560 Duemilanove. If driving voltage is more than 12V, please use external standard 5volt TTL outputs to switch the H-bridge circuits.
Check StockUniversal Voltage Regulator Rectifier Electrical Voltage Regulator for Motorcycle And Boat Motors DIY Engines
- 【Good Heat Dissipation】-- Using heat sink design, our pit bike rectifier has good heat dissipation and long service life.Made of high quality....
- 【Simple to Connect】-- Adopt original standard with four wires, no need to connect with the original motorcycle perfectly. Red wire connection +....
- 【Multiple Protection】-- Our go kart rectifier is made of aluminum and are suitable for a variety of harsh working conditions. The power module has....
- 【Widely Used】-- The regulator rectifier 4 pin is commonly used in motorcycle , boat motors and DIY engines etc.
- 【Customer Service】-- We can promise you 100% that if you are not satisfied with the goods, you can return them 100%.If you have any questions, you....
Check StockJuried Engineering LM339N LM339 Quad Differential Comparator Industrial Grade Breadboard-Friendly IC DIP-14 (Pack of 5)
- SINGLE-CHANNEL: TLV3501 is a single-channel high-speed push-pull output comparator, delay is 4.5ns, supply voltage: + 2.7V to + 5.5V.
- FRONT SHAPING MODULE: This module can be for a wide range of voltage signal shaping period, as the frequency, phase difference time domain measurements and other front-end conditioning module.
- CMOS AND TTL: Rail-to-rail output can directly drive a CMOS or TTL logic.
- EASY TO OPERATE: Without threshold setting, the sine wave, square wave and triangular wave can be transformed into square wave, which can be used easily without debugging.
- GREAT EXTENSIBILITY: At the same time, it has great extensibility, just change a small amount of the original.
Check Stock