Categories

Best Single phase Generator

KI-DAVR 95S AVR Automatic Voltage Regulator Controller Generator Parts for 8.5/9.5Kw Single-Phase Generator.

  • High quality generator voltage regulator, stable performance..
  • With short circuit protection and PID regulation..
  • Professional manufacturing, exquisite workmanship, high reliability..
  • It has the characteristics of over current protection, over voltage protection and overload protection..
  • KI-DAVR 95S is suitable for 8.5/9.5KW single-phase generator..
Check Stock

400W Three-Phase alternator, Rare earth NdFeB Permanent Magnet Electric Motor Generator DIY AC Alternator AVAN?400w Permanent Magnet Motor ((With Rectifier 12V)

  • [Rare earth NdFeB iron boron material]: The permanent magnet material is made of rare earth NdFeB iron boron material, which is called the king of magnets. It is wound with high-grade pure copper wire, so this permanent magnet generator has higher efficiency, more stable power and more Safe and reliable..
  • [Good heat dissipation performance]: The three-phase AC generator adopts special stator and rotor design, and has low starting resistance torque and good heat dissipation performance, stable operation and high safety factor..
  • [Easy operation]: The low-speed rare earth permanent magnet generator is very simple to operate, and the three-phase AC permanent magnet generator is safe, easy to maintain, gearless, and can be driven directly..
  • [Die-cast aluminum alloy shell]: The three-phase AC permanent magnet generator adopts a die-cast aluminum alloy shell with anti-corrosion treatment, acid, alkali and salt resistance, corrosion resistance, and a longer service life..
  • [Surface spraying technology]: The permanent magnet generator adopts advanced surface spraying technology, which is not only energy-saving, efficient, safe and reliable, but also bright in color and beautiful in appearance..
Check Stock

AVAN-300W Three-Phase alternator Permanent Magnet Generator, Rare earth NdFeB Electric 3 Phase High Speed Permanent Magnet Generator (With Rectifier 48V)

  • [Three-phase alternator]: rated power: 300w.
  • permanent magnet material: rare earth NdFeB iron boron.
  • Generator diameter: about 150mm / 5.9 inches.
  • [Rare earth NdFeB iron boron material]: The permanent magnet material is made of rare earth NdFeB iron boron material, which is called the king of magnets. It is wound with high-grade pure copper wire, so this permanent magnet generator has higher efficiency, more stable power and more Safe and reliable..
  • [Good heat dissipation performance]: The three-phase AC generator adopts special stator and rotor design, and has low starting resistance torques and good heat dissipation performance, stable operation and high safety factor..
  • [Easy operation]: The low-speed rare earth permanent magnet generator is very simple to operate, easy to maintain, gearless, can be directly driven, and adopts advanced surface spraying technology, energy saving, high efficiency, safe and reliable, and bright color..
  • [Die-cast aluminum alloy shell]: The three-phase AC permanent magnet generator adopts a die-cast aluminum alloy shell with anti-corrosion treatment, acid, alkali and salt resistance, corrosion resistan....
Check Stock

Tripp Lite Basic PDU, 30A, 20 Outlets (16 C13 & 4 C19), 200/208/240V, L6-30P Input, 15' Cord, 1U Rack-Mount Power, 5 Year Warranty (PDU1230)

  • Single phase PDU: safe, reliable power distribution unit delivers 200/208/240V single-phase AC power to multiple loads from a utility outlet, generator or UPS system in a high-density it environment. Ideal no-frills basic PDU for networking, telecom, security, PDU networking, and audio/video applications.
  • 20 outlet power distribution: The PDU features 20 total outlets rear C13, four front C13 and four front C19. The NEMA L6-30P input Plug with long 15-foot (4.5 M) cord connects to your facility’s compatible AC power source, generator or protected ups to distribute power to connected equipment. Pdu offers 208/240 volts AC, 30a maximum input current.
  • Switchless design: the switchless design prevents an accidental shutdown, which could lead to costly downtime. Built-in circuit breakers protect connected equipment from dangerous overloads.
  • 1U metal Housing: reversible all-metal housing faces front or rear in rack. Power distribution unit mounts horizontally in 1U of EIA-standard 19 in. 2- and 4-post racks, as well as on a wall or workbench or under a counter. Also known as - PDU power strip, power distribution unit rack mount, basic rack PDU, PDU 30a, rack mount PDU and power distribution unit 19 rack mount.
  • 5 year warranty & FREE tech support: Tripp Lite ....
Check Stock

1600W Windmill Generator 5 Blade Small Wind Turbines Kit Industrial Energy Equipment (Black 48V)

  • 【STABLE OPERATION】: The durable parts of this windmill generator adopt a three-phase AC permanent magnet synchronous generator, which has stable operation, low noise and long service life..
  • 【ADJUSTING VOLTAGE AND CURRENT】: The windmill generator can effectively adjust current and voltage and improve wind energy utilization..
  • 【WIDE APPLICATION】: This windmill generator is widely used for charging boats, terraces, cabins or mobile homes, etc..
  • 【EASY TO INSTALL】: The windmill generator is well made and the wind turbine is easy to install, maintain and repair..
  • 【MATERIALS】: The windmill generator is made of high-quality materials, resistant to high temperatures, and guarantees the speed of power generation..
Check Stock

Rigol DG1022Z 25 MHz Arbitrary Function Generator with Second Channel

  • 25MHz Function Generator, 2 Channel, 125MSa/sec, 16Bit Resolution, 2M Memory.
  • 2 Mpts memory depth (upgradeable to 8 Mpts).
  • Built-in high-order harmonic generator (at most 8-order harmonics).
Check Stock

Generac 6852 Home Link Upgradeable Transfer Switch Kit, 30 Amp

  • 100-Amp 120/240 volt single phase Smart transfer switch is housed in a Steel NEMA/UL type 3R enclosure.
  • Transfer switch connects through the utility meter for easy installation.
  • smaller fuses integrated into the control board.
  • Heavy duty Generac contactor is a UL recognized Device designed for years of service.
  • The controller at the generator handles all the timing, sensing, exercising functions and transfer commands.
  • Can be used in Tandem with Generac's Smart Management modules, up to 8 more loads can be managed as well, providing the most installation efficient power Management options available.
Check Stock

Sigineer Power 48V 5000W Single Phase 240V Off-Grid Solar Inverter Charger,48V DC to 240V AC Pure Sine Wave Inverter,100A MPPT Solar Charge Controller,450V Max PV Input,Parallel Operation

  • ...mmunication port support RS485/CAN protocol, multi-stage smart charging, utility charging timer function, parallel operation, support operation without battery connected.
  • AUTOMATIC: Auto-wakeup MPPT charge controller, automatic over-load bypass, auto-recovery from over-load/over-temperature/low-battery cut-off, auto-generator start, auto-sensing frequency (50Hz or 60Hz).
  • MULTI-MODE: 4 charging modes, 3 output power priorities, configurable parameters set through LCD menu, remote monitoring and control, protections against overload, short circuit, over-temperature, under & over voltage, over-discharge, and battery reverse polarity protection.
  • BUY WITH CONFIDENCE: Trust Sigineer Power, a dedicated inverter brand and professional manufacturer in business for over 10 years, offering 12 months warranty and lifetime tech support.
  • REMINDER: This is NOT a SPLIT PHASE inverter, it CAN NOT output 120Vac. It ouputs 240Vac SINGLE PHASE ONLY. Please keep this in mind when you place an order..
Check Stock

Generac RXSW200A3 200 AMP Smart Transfer Switch

  • 150-Amp 120/240 volt single phase Smart transfer switch with service disconnect which is housed in an aluminum NEMA/UL type 3R enclosure with electrostatically applied and baked powder paint.
  • Transfer switch connects through the utility meter for easy installation.
  • Heavy duty Generac contactor is a UL recognized Device, designed for years of service, the controller at the generator handles all the timing, sensing, exercising functions and transfer commands.
  • Can be used in Tandem with Generac Smart Management modules, up to 8 more loads can be managed as well, providing the most installation efficient power Management options available.
Check Stock

SMARTGEN MGC100 Manual/Remote Start Generator Controller Module

  • Low cost controller designed to start/stop a generator manually and remotely.
  • Suitable for 1-3 phase gasoline and diesel gensets.
  • Generator protection, built-in alarms and warnings.
Check Stock

310A Pro/Tran2 30-Amp 10-Circuit 2 Manual Transfer Switch with Optional Power Inlet

  • 200-Amp 120/240 volt single phase Smart transfer switch with service disconnect which is housed in an aluminum NEMA/UL type 3R enclosure with electrostatically applied and baked powder paint.
  • Transfer switch connects through the utility meter for easy installation.
  • Heavy duty Generac contactor is a UL recognized Device, designed for years of service, the controller at the generator handles all the timing, sensing, exercising functions and transfer commands.Maximum Wattage:48000 Watts.
  • Can be used in Tandem with Generac Smart Management modules, up to 8 more loads can be managed as well, providing the most installation efficient power Management options available.
Check Stock

top-tool DIY Vertical Axis Wind Turbine Model Wind Power Generator Three-Phase Permanent Magnet Generator Windmill Toy Night Light Making

  • It adopts three-phase permanent magnet synchronous generator, no carbon brush, and sends out three-phase ALTERNATING current, the bottom outgoing line is three-wire, and the LED can be lit by gently pushing the wind blade.
  • The bottom aluminum alloy bracket with screw holes is convenient for installation and fixation.
  • The blade beam adopts hardware stamping to ensure the strength.
  • The blade adopts PVC popular design, high conversion efficiency, corrosion resistance, uv resistance, generator shaft fixed with flange, to ensure accuracy and level, the rest of the parts using 3D printing manufacturing, really do the breeze start.
  • The height of the whole machine is 420mm, the distance from the edge of the fan blade to the axis is 105mm, the rotating diameter is 220mm, and the length of the blade is 250mm.
Check Stock

2X 5-15 Plug Male to Generator Twist Lock L14-30 Receptacle Female Y Adapter Cord STW 3 Feet 120V/240V 30 Amp Generator Welder Dryer Power Cord Adapter

  • MALE Rating: 10AWG 5-15P Double male Max 15Amp For Each 125V 3 Prong.
  • FEMALE Rating: Generator NEMA L14-30 Receptacle 4 Prong 30 AMP 125V / 250V..
  • If you connect it to two outlets on different phases of the panel, you will have a total of 30 amps of capacity at 240v. If you connect it to two outlets on the same phase of the panel, you will have two 15 or 20 amp, 120v circuits on one cord..
  • Molded plug, copper wiring coated wire, heavy-duty flame retardant, UV-resistant, STW indoor/outdoor water-resistant PVC jacket..
  • Tips: According to existing user and customer reports, it does not work with the Predator 4000 generator.
Check Stock