Categories

Best Sink Bowl 304

Lordear 30x22 Kitchen Sink Black Drop In Single Bowl 16 Gauge Stainless Steel Gunmetal Black 30 Inch Topmount Kitchen Sinks 30\ Basin

  • ❤【T-304+16 Gauge+NANO Coating 】The 30x22 inch black topmount kitchen sink is constructed with rust resistant T304 stainless steel in TRU16 real 16-gauge for superior strength and durability. The beautiful nano coating finish offers amazing look and most importantly, no water trace will left. The stain and oil can be wiped out immediately. Sand Blasting tech improve the sink hardness to 8H to resist scratches..
  • ❤【Large Bowl Black Topmount Kitchen Sink 】- 30*22*10 inch(minimum cabinet size is 33 inch).
  • Internal Bowl size: 28x17.8 inch, designed with two standard 35mm pre-drilled faucet holes (decorative caps included) | Standard 3.5" drain openings will fit any garbage disposal unit..
  • ❤【 Drain Easily, Sound Proof 】 -This 30” gunmetal black drop in kitchen single bowl sink with X-shaped diversion water design and a gently sloped bottom that prevents standing water inside the bowl fast drainage, no blockage.Five LARGE AND THICK rubber pads around the bottom to eliminate noise. Besides, full coating to prevent condensation and protect your cabinet..
  • ❤【 CUSTOMIZED PREMIUM ACCESSORIES】 1x stainless steel black kitchen sink: 1x304 stainless steel dish grid, 1 x drain assembly, 1 x drying rack, 1 pack clips, 1x cutout template and ....
Check Stock

Dawn Top Mount stainless steel sink 304 Type Stainless Steel Satin Polished Finish CH368

  • 【Indestructible Material】 This 26-inch single bowl undermount kitchen sink is made of SUS304 stainless steel, The commercial grade T304 stainless steel with satin finish ensures that it is highly resistant to dirt and grime, easily wipes clean, and matches most kitchen appliances..
  • 【Unique design】Single bowl sink Used Ultra-quiet design, with thicker and softer rubber noise reduction pads. The anti-condensation thick noise reduction coating absorbs sound from the source and isolates the condensation water..
  • 【Drop in Handmade Kitchen sink】The bottom is slightly inclined to prevent water from remaining in the bowl. The X-slot design is easy to drain, and the rear 3.5" drain pipe matches most kitchen appliances, fits the most common waste disposal systems and frees up extra space..
  • 【Dimension】9-inch Deep stainless steel kitchen and bar preparation sink. Frying pan for quick draining and drying, with slanted base channel. External dimensions: 28" (Wide) x 18" (Front-to-Back) | Internal dimensions: 26 inches (Wide) x 14" (Front-to-Back) x 9" (bowl depth) | Minimum cabinet size: 30"..
  • 【Guarantee】6 years warranty period,with 100% inspection to guarantee high quality and offer free return and refund guarantee..
Check Stock

33 Kitchen Sink Undermount - Lordear 33 inch Undermount Sink 16 Gauge Deep Single Bowl Stainless Steel Kitchen Sinks Basin 33x19 Inch

  • ❤ REAL T304 16 Gauge Material--Lordear 33 Inch Stainless Steel Kitchen Sink Undermount is constructed with premium true SUS304 16-gauge thick grade stainless steel to resist rust and corrosion. It can keep new even after many years of using. Real wear/heat/rust/corrosion-resistant. Undermount installation type can help you clean the countertop more easily, just need sweep the debris or water into the bowl directly..
  • ❤ ROUND CORNER+BRUSED SURFACE -- This 33 undermount kitchen sink is designed with R10 tight radius corners to prevent corner stain accumulation, more easier in cleaning. Commercial grade brushed surface makes our kitchen sink more functional in resisting scratches and more charming, fits well with all kinds of countertop..
  • ❤DRAIN FAST&SOUND DAMPENING -- our undermount single bowl sink has X-shaped diversion waterlines and a gently sloped bottom that prevents standing water inside the bowl fast drainage, no blockage. Thickest sound-proof pads have been added to absorb running water sound. Full and thick outer body coating is paited to prevent moisture accumulation, well protect your cabinet..
  • ❤ Kitchen Sink Size and Accessories---33*19*10 inch (Minimum cabinet size is 36 inch).
  • What's in the box: Include a stainless steel kitchen sink....
Check Stock

Signature Hardware 948495 Cypress 34\ Undermount 60/40 Double Basin Stainless Steel Kitchen Sink

  • Boasting a highly functional design, the 32” Cypress double-bowl sink features a large basin for washing dishes and a smaller basin for prep work. A low center divide allows for large pots and pans to be maneuvered easier. This product is made of durable, 304-grade stainless steel to handle all your demands. On the bowl's underside, sound absorption pads dampen noise made by running water and cleaning dishes, while the undercoating prevent condensation buildup in the cabinet below..
  • Covered under Signature Hardware's limited lifetime.
  • Undermount installation – sink will install under the counter top.
  • It is recommended to have the sink at the job site before cutting cabinet or counter top.
  • Sound absorption pads on the underside of sink.
  • Has an undercoating to prevent condensation buildup.
  • Basin Dimensions (Left): 18-1/4" L x 19" W x 9" D.
  • Basin Dimensions (Right): 12-1/8" L x 19" W x 9" D.
Check Stock

ROVOGO 23 x 18 in. Undermount Single Bowl Kitchen Sink, 304 Stainless Steel Handmade Bar Prep Sink with Basket Strainer

  • 【Single Bowl Sink Size】① Sink dimensions: 23x18x9 in, 9-in deep bowl provides more room for stacking dishes, and washing large items like stockpots.
  • ② Drain opening size: 3 1/2 in, standard 3.5 in. drain opening will fit any garbage disposal unit.
  • 【304 Stainless Steel Sink】Handmade 304 stainless steel sink, 11 Gauge sink lip with 18 Gauge basin is durable and anti-rust.
  • Brushed finish is easy to clean, long-lasting and matches well with your kitchen appliances.
  • 【Sound Absorbing Quiet Sink】Sound-guard pads and Noise-proof undercoating cover bottom and sides of the sink, reduce unwanted noise and vibration, provide a protective barrier against moisture.
  • 【Complete Drain and Easy-Clean】Sloped sink bottom and creased channel grooves direct water into the drain to keep sink free of standing water.
  • Tight-radius corners designed for a sleek contemporary look and easy cleaning.
  • 【Drain Kit Included】Stainless steel removable deep basket strainer and tailpiece included, no need to buy drain separately.
Check Stock

Black Kitchen Sink - Lordear 33x22 Gunmetal Black 16 Gauge Stainless Steel Drop In Kitchen Sinks R10 Tight Radius Round Corner Single Bowl 33 Inch Topmount Kitchen Sink

  • ❤【T-304+16 Gauge+NANO Coating 】The 33x22 inch black topmount kitchen sink is constructed with rust resistant T304 stainless steel in TRU16 real 16-gauge for superior strength and durability. The beautiful nano coating finish offers amazing look and most importantly, no water trace will left. The stain and oil can be wiped out immediately. Sand Blasting tech improve the sink hardness to 8H to resist scratches..
  • ❤【Large Bowl Black Topmount Kitchen Sink 】- External size: 33*22*10 inch(minimum cabinet size is 36 inch).
  • Internal Bowl size: 31x17.8 inch, designed with two standard 35mm pre-drilled faucet holes (decorative caps included) | Standard 3.5" drain openings will fit any garbage disposal unit..
  • ❤【 Drain Easily, Sound Proof 】 -Lordear black topmount single bowl kitchen sink designed with X-shaped diversion water design and a gently sloped bottom that prevents standing water inside the bowl fast drainage, no blockage.Five LARGE AND THICK rubber pads around the bottom to eliminate noise. Besides, full coating to prevent condensation and protect your cabinet..
  • ❤【 CUSTOMIZED PREMIUM ACCESSORIES】 1x304 stainless steel bottom grid, 1 x full stainless steel drain assembly, 1 x drying rack, 1x pack clips, 1x cutout template and install....
Check Stock

Signature Hardware 948490 Calverton 30\ Drop In or Undermount Single Basin Stainless Steel Kitchen Sink

  • The 30” Calverton Stainless Steel Sink features easy-to-clean, rounded corners within its sizable bowl. This durable basin is made of 304-grade stainless steel that requires very little maintenance. On the bowl's underside, sound absorption pads dampen noise made by running water and maneuvering dishes, while the undercoating prevent condensation buildup in the cabinet below. A rear-center drain location provides more room for food preparation or dish cleaning without blocking the drain..
  • Covered under Signature Hardware's limited lifetime.
  • Dual installation – sink can be installed under the counter top or be dropped into a cutout in the countertop.
  • Single basin design for maximum workspace.
  • It is recommended to have the sink at the job site before cutting cabinet or counter top.
  • Sound absorption pads on the underside of sink.
  • Has a undercoating to prevent condensation buildup.
  • Sink Length: 29-3/4" (from left to right).
  • Sink Height: 10-1/8" (from top to bottom).
  • Basin Dimensions: 27-11/16" L x 16" W x " D.
Check Stock

33 Kitchen Sink Drop In - Logmey 33x22 Drop In Topmount 18 Gauge Stainless Steel Kitchen Sink

  • ✅This drop-in Kitchen Sink is constructed of Dent-resistant T304 stainless steel in 18-gauge for superior strength and durability. Commercial grade brushed satin finish, easy to clean and long-lasting..
  • ✅The drop-in double bowl kitchen sink with slope bottom and X shape drain grooves to allow complete water drainage. 3.5" standard drainage hole is available for garbage disposal set..
  • ✅33 double bowl kitchen sink with big and deep double bowl sink can be soak and clean large cookware and bakeware. Heavy-duty sound guard undercoating and thick rubber padding to minimize noise and reduce condensation..
  • ✅Kitchen Sink Size and Package: 33*22*9 inches (minimum cabinet size is 36 inches). Inner Size: left bowl 14" x 17 3/4" x 8 3/4".
  • Right bowl 16" x 17 3/4" x 8 3/4". Item included a drop-in double bowl kitchen sink, drain assembly, bottom rinse grid, and roll-up rack..
  • ✅Warranty: 3-month hassle-free return and money back, pls buy with confidence. Welcome to contact us if you have any questions about this product..
Check Stock

33 Kitchen Sink - Lordear 33\x22\ Kitchen Sink Drop-in Topmount 16 Gauge R10 Tight Radius Stainless Steel Single Bowl Kitchen Sink

  • ❤ 33 drop sink is made from T304 16 Gauge durable stainless steel .The panel is 1.5mm thick will not deformed. It is filled with dishes for a long time. The sink is still strong..
  • ❤ This 33 inch kitchen sink with R10 tight radius round corner design. Increase sink space cleaning.Easy to clean and long-lasting..
  • ❤ Drop in Kitchen sink with X-shaped diversion water design, with a gently sloped bottom that prevents standing water inside the bowl fast drainage, no blockage.
  • ❤ Stainless Steel Kitchen Sink Size and Accessories---33"x 22"x 10" (minimum cabinet base is 36"). What's on the box: Include a 33 single bowl kitchen sink, 304 stainless steel dish grid, basket strainer,drying rack,cutout template and installation introuction..
  • ❤ Warranty: 3 months hassle free for return and money back.If there any problem, please feel free to contact us ..
Check Stock

30 Undermount Sink Double Bowl - Lordear 30 Inch Kitchen Sink Undermount Low Divide Double Bowl 50/50 16 Gauge Stainless Steel Kitchen Sink

  • ❤ This undermount kitchen sink is made of 16 gauge premium T-304 grade stainless steel ,prevent rust and stain, durable..
  • ❤ This double bowl sink has unique design with low water divide. Divider between two bowls is 4" lower. U have more space to washing dishes..
  • ❤ The undermount sink with X-shaped diversion water design and a gently sloped bottom that efficient and complete drainage, no blockage..
  • ❤ Kithen Undermount Sink Size & Package: 30''*19"*10’’ (minimum cabinet size is 33 inch). What's in the box: Include a 30 inch undermount double bowl sink, 304 stainless steel dish grid, drain assembly, drying rack,cutout template and installation introuction..
  • ❤ Warranty: 3 months hassle free for refund or replacement.If you have any problem about the product,please feel free to contact us..
Check Stock

Signature Hardware 948492 Calverton 32\ Drop In or Undermount 40/60 Double Basin Stainless Steel Kitchen Sink

  • Featuring a large basin for washing dishes and a smaller basin for prep work, the 32” Calverton Double-Bowl Sink is functionally designed. This product is made of durable, 304-grade stainless steel to handle all your demands. On the bowl's underside, sound absorption pads dampen noise made by running water and maneuvering dishes, while the undercoating prevent condensation buildup in the cabinet below..
  • Covered under Signature Hardware's limited lifetime.
  • Dual installation – sink can be installed under the counter top or be dropped into a cutout in the countertop.
  • Sink features dual basins with a 60/40 split.
  • It is recommended to have the sink at the job site before cutting cabinet or counter top.
  • Features a low center divide for maneuvering large pots and pans.
  • Sound absorption pads on the underside of sink.
  • Has an undercoating to prevent condensation buildup.
  • Sink Length: 31-3/8" (from left to right).
  • Sink Width: 20-3/8" (from front to back).
  • Basin Dimensions (Left): 13-1/2" L x 15-5/8" W x 7-1/2" D.
  • Basin Dimensions (Right): 14-7/8" L x 18-1/4" W x 10" D.
Check Stock

Serene Valley Kitchen Sink Bottom Grid and Sink Protector NDG3019, 304 Premium Stainless Steel, dim 26” x 14 1/8”

  • FIT DRAWN SINK BOWL SIZE: 28″ x 16″, with Corner Radius 3 1/2″. Please see our infographics in order to MEASURE YOUR SINK BOWL CORRECTLY..
  • Sink Grid SIZE: 26″ x 14 1/8″ x 1″..
  • CENTERED DRAIN LOCATION: It should be 8″ from the sink drain hole center to the top inside sink edge..
  • MATERIAL and FUNCTIONAL: 304 Premium stainless steel to ensure durability and rust-free with limited life warranty and protect your kitchen sink from daily wear..
  • NOTICE: Please measure your sink bowl before purchasing. Highly heat-resistant (up to 440F) silicone mat is included as free gift and comes in random colors..
Check Stock

KRAUS KBU32 Premier 32-inch 16 Gauge Undermount 50/50 Double Bowl Kitchen Sink with Smart Low Divider

  • KITCHEN SET INCLUDES: Double bowl sink, stainless steel bottom grid (x2), drain assembly (x2), mounting hardware, cutout template – LIFETIME LIMITED WARRANTY and customer service that puts you first.
  • SMART LOW DIVIDER provides the spaciousness of a single bowl sink with the functionality of a double bowl. Extra clearance allows you to wash large items over both sink bowls, PREVENTS OVERFLOW onto the kitchen counter – DEEP & SPACIOUS 50/50 double bowl sink is perfect for soaking and washing stacks of dishes, comfortably fits your largest cookware.
  • DENT-RESISTANT SINK (32 1/4 in. x 18 7/8 in. x 8 3/4 in.) made from durable TRU16 real 16-gauge T304 stainless steel with satin finish that will not dull from daily use – FULLY INSULATED with extra-thick pads to absorb noise and vibration – EASY TO CLEAN with generously curved corners.
  • UNDERMOUNT INSTALLATION creates a seamless transition from sink to countertop and makes it easy to wipe water and crumbs straight into the sink.
  • sink bottom is ENGINEERED FOR EASY DRAINING with optimized slope that prevents fragile glassware from falling over.
  • STAINLESS STEEL BOTTOM GRID included FREE: Protects the bottom of the sink from scratches and keeps dishes elevated to help sink drain quickly and completely.
Check Stock