Categories

Best Sintered Bronze

ACDelco Gold 336-1824 Starter, Remanufactured

  • Remanufactured using consistent quality processes.
  • Starters have new bronze sintered and oil-impregnated armature bushings.
  • Solenoid contacts are new with copper terminals and plated hardware.
  • Performance-tested and inspected to ensure they meet your expectations for quality design and component specifications.
Check Stock

Caterpillar Fuel/Hydraulic Cap for 7T2036 8P0408

  • Element: Sintered Bronze (40 um Standard).
Check Stock

Milton 1019-8 3/8\ NPT Metal FRL Filter

  • Maximum pressure of 150 pounds per square inch.
  • Maximum of 75 standard cubic feet per minute at 100 pounds per square inch.
  • Temperature range of 40 degrees Fahrenheit to 160 degrees Fahrenheit.
  • Includes sight glass to monitor water levels.
Check Stock

The Hillman Group 58079 Sleeve Bearing, Bronze 3/8 X 1/2 X 1-Inch, 5-Pack

  • Oil-Impregnated provides a low friction surface.
  • Sleeve design provides a level surface around the surface of the bearing.
Check Stock

The Hillman Group 58083 Sleeve Bearing, Bronze 5/8 X 3/4 X 1-Inch, 4-Pack

  • Oil-Impregnated Provides A Low Friction Surface.
  • Sleeve Design Provides A Level Surface Around The Surface Of The Bearing.
Check Stock

The Hillman Group 58077 Sleeve Bearing, Bronze 1/4 X 5/16 X 3/4-Inch, 5-Pack

  • Oil-Impregnated Provides A Low Friction Surface.
  • Sleeve Design Provides A Level Surface Around The Surface Of The Bearing.
Check Stock

The Hillman Group 58080 Sleeve Bearing, Bronze 1/2 X 5/8 X 1-1/8-Inch, 5-Pack

  • Oil-Impregnated Provides A Low Friction Surface.
  • Sleeve Design Provides A Level Surface Around The Surface Of The Bearing.
Check Stock

The Hillman Group 58081 Sleeve Bearing, Bronze 1/2 X 11/16 X 1-1/8-Inch, 4-Pack

  • Oil-Impregnated Provides A Low Friction Surface.
  • Sleeve Design Provides A Level Surface Around The Surface Of The Bearing.
Check Stock

The Hillman Group 58084 Sleeve Bearing, Bronze 5/8 X 3/4 X 1-1/8-Inch, 4-Pack

  • Oil-Impregnated provides a low friction surface.
  • Sleeve design provides a level surface around the surface of the bearing.
  • Product Dimension: 2.4"L x 2.7"W x 1.6"H.
Check Stock

uxcell Bearing Sleeve 8mm Bore x 12mm OD x 15mm Length Self-Lubricating Sintered Bronze Bushings 3pcs

  • Bore: 8mm, Outside Diameter: 12mm, Length: 15mm.
  • Material - Sintered Bronze (copper-tin alloy). They are self-lubricating, making them maintenance-free. High wear-resistant and corrosion-resistant..
  • Function - The bushings can be used for different purposes, such as positioning, wear and vibration reduction, or to isolate the shaft from special media to increase the life of the shaft..
  • Application - Bronze bushings are most for general-purpose where moderate speeds and loads are present. Sleeve bearings are used in a vast variety of industrial equipment..
  • More - They also can be used for reducing bore diameter or replacing worn-out original bushings on wheels..
Check Stock

uxcell Bearing Sleeve 10mm Bore x 16mm OD x 15mm Length Self-Lubricating Sintered Bronze Bushings 6pcs

  • Bore: 10mm, Outside Diameter: 16mm, Length: 15mm.
  • Material - Sintered Bronze (copper-tin alloy). They are self-lubricating, making them maintenance-free. High wear-resistant and corrosion-resistant..
  • Function - The bushings can be used for different purposes, such as positioning, wear and vibration reduction, or to isolate the shaft from special media to increase the life of the shaft..
  • Application - Bronze bushings are most for general-purpose where moderate speeds and loads are present. Sleeve bearings are used in a vast variety of industrial equipment..
  • More - They also can be used for reducing bore diameter or replacing worn-out original bushings on wheels..
Check Stock

uxcell Bearing Sleeve 6mm Bore x 10mm OD x 6mm Long Self-Lubricating Sintered Bronze Bushings 10pcs

  • Bore: 6mm, Outside Diameter: 10mm, Length: 6mm.
  • Material - Sintered Bronze (copper-tin alloy). They are self-lubricating, making them maintenance-free. High wear-resistant and corrosion-resistant..
  • Function - The bushings can be used for different purposes, such as positioning, wear and vibration reduction, or to isolate the shaft from special media to increase the life of the shaft..
  • Application - Bronze bushings are most for general-purpose where moderate speeds and loads are present. Sleeve bearings are used in a vast variety of industrial equipment..
  • More - They also can be used for reducing bore diameter or replacing worn-out original bushings on wheels..
Check Stock

The Hillman Group 58078 Sleeve Bearing, Bronze 1/4 X 3/8 X 1-Inch, 5-Pack

  • Sleeve design provides a level surface around the surface of the bearing.
  • Oil-impregnated construction provides a low-friction surface.
  • These nylon strain relief bushings for flat electrical cables feature a 0.437" hole diameter and nominal wire size of 3P4.
Check Stock