Categories

Best Sintered Bronze Bearing

The Hillman Group 58081 Sleeve Bearing, Bronze 1/2 X 11/16 X 1-1/8-Inch, 4-Pack

  • Oil-Impregnated Provides A Low Friction Surface.
  • Sleeve Design Provides A Level Surface Around The Surface Of The Bearing.
Check Stock

The Hillman Group 58084 Sleeve Bearing, Bronze 5/8 X 3/4 X 1-1/8-Inch, 4-Pack

  • Oil-Impregnated provides a low friction surface.
  • Sleeve design provides a level surface around the surface of the bearing.
  • Product Dimension: 2.4"L x 2.7"W x 1.6"H.
Check Stock

The Hillman Group 58078 Sleeve Bearing, Bronze 1/4 X 3/8 X 1-Inch, 5-Pack

  • Sleeve design provides a level surface around the surface of the bearing.
  • Oil-impregnated construction provides a low-friction surface.
  • These nylon strain relief bushings for flat electrical cables feature a 0.437" hole diameter and nominal wire size of 3P4.
Check Stock

PSCCO 8PCS Air Pneumatic Mufflers 1/4'' Bronze Exhaust Muffler Silencer

  • Package includes: 5 sintered bronze mufflers, 1 teflon tape.
  • Mufflers utitlize porous sintered bronze filter element secured to standard pipe fittings..
  • Easy to install and maintain, particularly suitable where space is limited. High noise reduction effect..
  • Widely used for Cylinders, Air cylinders, Solenoid valves, Crank cases, gear boxes, oil tanks, Pneumatic tools.
Check Stock

Karcy Pack of 100 Brass 1/4\ NPT Flat Pneumatic Muffler Filter Silencer Fitting

  • ►【FEATURE】- Sintered Bronze Exhaust Muffler used to reduce dynamic noise of the pneumatic components or device exhaust..
  • ►【UNIVERSAL DESIGN】- Brass Exhaust Muffler Thread Outer Diameter : 1/4NPT.
  • ►【ADVANTAGE】- Sintered bronze filter element designed in many small holes drilled in the pipe wall, When the air flows through the small holes, gradually changing the frequency of the original airflow, thereby reducing noise..
  • ►【 MATERIAL】- Bronze Exhaust Muffler made of copper, high pressure resistant, not easy to rust, not easy to trip, better noise reduction.
  • ►【APPLICATION】- Pneumatic Muffler used to diffuse air and muffler noise from the exhaust ports of air valves, air cylinders and air tools to an acceptable level within noise requirements..
Check Stock

Huco 333.31.3.Z Size 31 L-Box Miniature Right Angle Gearbox, Acetal Case with Acetal Gears, Inch, 1.2\ OD, 1.2\ Length

  • Hardened steel shafts for strength and durability.
  • Sintered bronze bearing system for durability and resistance to corrosion.
  • Acetal gears molded to steel shafts are lightweight and durable for low-friction performance.
  • Electrical isolation between shafts and Acetal housing to prevent electrical arcing and circuit shortages.
  • Two counterbored clearance holes on case for conventional chassis mounting.
Check Stock

ZLYY 5Pcs 1/4 Male Thread Pneumatic Silencer Muffler Fitting, Top Adjustable Air Flow Speed Controller, Sintered Bronze Exhaust Muffler

  • FEATURES: Sintered Bronze Exhaust Muffler used to reduce dynamic noise of the pneumatic components or device exhaust..
  • SPECIFICATIONS: Brass Exhaust Muffler Thread Outer Diameter : 1/4 PT.
  • APPLICATION: Pneumatic Muffler used to diffuse air and muffler noise from the exhaust ports of air valves, air cylinders and air tools to an acceptable level within OSHA noise.
  • ADVANTAGE: Sintered bronze filter element designed in many small holes drilled in the pipe wall, When the air flows through the small holes, gradually changing the audio frequency of the original airflow, thereby reducing noise..
  • HIGH QUALITY MATERIAL: Bronze Exhaust Muffler made of copper, high pressure resistant, not easy to rust, not easy to trip, better noise reduction.
Check Stock

Damtite 07502 Gray Waterproofing Hydraulic Cement, 50 lb. Pail

  • See Notes below for parts included in this Kit.
  • Sintered Bronze Filter (RPI Part #MIF038).
Check Stock

ACDelco Gold 336-1824 Starter, Remanufactured

  • Remanufactured using consistent quality processes.
  • Starters have new bronze sintered and oil-impregnated armature bushings.
  • Solenoid contacts are new with copper terminals and plated hardware.
  • Performance-tested and inspected to ensure they meet your expectations for quality design and component specifications.
Check Stock

Caterpillar Fuel/Hydraulic Cap for 7T2036 8P0408

  • Element: Sintered Bronze (40 um Standard).
Check Stock

Milton 1019-8 3/8\ NPT Metal FRL Filter

  • Maximum pressure of 150 pounds per square inch.
  • Maximum of 75 standard cubic feet per minute at 100 pounds per square inch.
  • Temperature range of 40 degrees Fahrenheit to 160 degrees Fahrenheit.
  • Includes sight glass to monitor water levels.
Check Stock

uxcell Bearing Sleeve 8mm Bore x 12mm OD x 15mm Length Self-Lubricating Sintered Bronze Bushings 3pcs

  • Bore: 8mm, Outside Diameter: 12mm, Length: 15mm.
  • Material - Sintered Bronze (copper-tin alloy). They are self-lubricating, making them maintenance-free. High wear-resistant and corrosion-resistant..
  • Function - The bushings can be used for different purposes, such as positioning, wear and vibration reduction, or to isolate the shaft from special media to increase the life of the shaft..
  • Application - Bronze bushings are most for general-purpose where moderate speeds and loads are present. Sleeve bearings are used in a vast variety of industrial equipment..
  • More - They also can be used for reducing bore diameter or replacing worn-out original bushings on wheels..
Check Stock

uxcell Bearing Sleeve 10mm Bore x 16mm OD x 15mm Length Self-Lubricating Sintered Bronze Bushings 6pcs

  • Bore: 10mm, Outside Diameter: 16mm, Length: 15mm.
  • Material - Sintered Bronze (copper-tin alloy). They are self-lubricating, making them maintenance-free. High wear-resistant and corrosion-resistant..
  • Function - The bushings can be used for different purposes, such as positioning, wear and vibration reduction, or to isolate the shaft from special media to increase the life of the shaft..
  • Application - Bronze bushings are most for general-purpose where moderate speeds and loads are present. Sleeve bearings are used in a vast variety of industrial equipment..
  • More - They also can be used for reducing bore diameter or replacing worn-out original bushings on wheels..
Check Stock