Best Sintered Carbide Ball - TopShopReview.com

Mevotech TTX Suspension Ball Joint

MAXIMUM TOUGHNESS: Get longer-lasting performance from patented sintered bearings..
QUICK AND EASY INSTALLATION: Simply secure ball joint to the vehicle with part specific Slotted Castle Nut & Easy Snap Cotter Pin provided..
SUPERIOR SEAL: Lock out moisture and contaminants with Integri-Boot design built into the ball joint assembly..
SIMPLE TO SERVICE: Make servicing a snap with the 90 Degree SAE grease fitting included..
ACCURATE FIT: Easily and accurately press fit the ball joint into the larger flange diameter..

High quality: Green silicon carbide grinding wheel is made of first grade sand, silicon carbide and binder at high temperature sintered, It is also called ceramic grinding wheel. Wear-resistant ,durable,strong toughness (Poor grinding wheel is reclaimed sand).
Features: Green silicon carbide grinding wheel, high hardness, high brittleness, sharp abrasive grains and good thermal conductivity. It is suitable for the grinding of non-ferrous metals such as cemented carbide tools and workpieces, as well as the grinding of non-metals such as optical glass, ceramics, and stone. It has the characteristics of not burning to the cutter head and not burning the workpiece.
Dimensions: Green Silicon Carbide Grinding Wheel diameter 6 inch /150mm, center hole 1/2 inch /12.7mm. thickness about 7.88 inch / 20m. Fixed aperture, not easy to shake during machine operation, safer.The standard size grinding wheel is mounted on the type 150 grinding wheel machine, please follow your machine Model, choose the grinding wheel that suits you.
Safety and Precautions: The workbench and the base grinder must be fixed, the machine without a fixed base will move, causing grinding and injury.Before installing the grinding wheel, please check and operate according to the instructions pr....

MAXIMUM TOUGHNESS: Get longer-lasting performance from patented sintered bearings..
QUICK AND EASY INSTALLATION: Simply secure ball joint to the vehicle with part specific Slotted Castle Nut & Easy Snap Cotter Pin provided..
SIMPLE TO SERVICE: Make servicing a snap with the 180 Degree & 90 Degree SAE grease fitting included..
LARGER SPHERE DESIGN: Optimize performance with application-specific ball stud system with larger sphere..
A STRONGER BOND: Keep fasteners secure and vibration resistant with pre-applied Nylok thread adhesive..

Fits JK/JKU Wrangler w/ Dana 30 or 44 axle.
Heat treated 4140 chromoly ball/stud and 1045 carbon steel housing.
2 grease zerk fittings allow greasing access from either side.
Extremely hard sintered wear bushings to handle extreme side load demands w/out failure.
30mm (1.18") adjustable ball stud for accurate initial and future preload adjustments using simple hand tools.

This item is a Pack of 100 Tungsten Carbide 1/16" Bearings Ball 0.063" inch Diameter Balls.
Pack of 100 Loose 1/16" inch Tungsten Carbide Ball Bearings1/16" inch = 0.

28 carbide tipped spikes per pair placed under toe, heel and ball of foot.
24 additional spike receptacles available for custom stud placement (Not included).
Quick release buckle and strap system for easy on/off.
Molded rubber walls at toe, heel and side provide secure fit.
Durable push-through carbide spikes placed under toe, heel and ball of foot.

Tapered Ball Nose carbide EndMill / Cone Cutters with 1/4 Inch Shank 2 Flutes, ZrN Coated.
Ball Raidus: 1/16inch Flute Length: 1inch, Overall Length: 2-1/2Inch, Single Side Angel: 3.58.
The Tapered Carbide Carving bits suit For CNC,Engraving Carving 3D machine..
For HRC 55 Carving and machining hard wood, solid wood, partical board, plywood, stainless steel,titanium alloy etc.
High quality tungsten carbide and coat. Long service life and less wear..

Tapered Ball Nose carbide EndMill / Cone Cutters with 1/4 Inch Shank 2 Flutes, ZrN Coated.
Ball Raidus: 1/64inch Flute Length: 1inch, Overall Length: 2-1/2Inch, Single Side Angel: 6.28.
The Tapered Carbide Carving bits suit For CNC,Engraving Carving 3D machine..
For HRC 55 Carving and machining hard wood, solid wood, partical board, plywood, stainless steel,titanium alloy etc.
High quality tungsten carbide and coat. Long service life and less wear..

Tapered Ball Nose carbide EndMill / Cone Cutters with 1/4 Inch Shank 2 Flutes, ZrN Coated.
Ball Raidus: 1/32inch Flute Length: 1inch, Overall Length: 2-1/2Inch, Single Side Angel: 5.38.
The Tapered Carbide Carving bits suit For CNC,Engraving Carving 3D machine..
For HRC 55 Carving and machining hard wood, solid wood, partical board, plywood, stainless steel,titanium alloy etc.
High quality tungsten carbide and coat. Long service life and less wear..

Fits: Harley Davidson FLHX Street Glide 2008-2013, FLHX Street Glide 2014-2015, FLHXS Street Glide Special 2015.
Complete Semi-Sintered Touring Bike V-Pads Brake Pad Change Kit includes 2 EBC FA409V Front Brake Pads and 1 EBC FA409V Rear Brake Pad.
EBC Brakes Semi-Sintered V-Pads are a new blended Semi-Sintered brake pad that combine the highest qualities of an organic brake pad with the endurance of a sintered equivalent brake pad.
The V-Pad range have been dyno tested and prove to be longer lasting than other cheap sintered aftermarket brake pads.
The Vee brake pad range are designed for the heavy cruiser/street bike market as a replacement brake pad.

Fits: Harley Davidson FLHX Street Glide 2008-2013, FLHX Street Glide 2014-2015, FLHXS Street Glide Special 2015.
Complete Double-H Sintered Brake Pad Change Kit includes 2 EBC FA409HH Front Brake Pads and 1 EBC FA409HH Rear Brake Pad.
Double-H Sintered Brake Pads deliver high performance and are well known as the EBC flagship sintered high-performance brake pad.
ECE R 90 brake safety approved and TUV tested, these ultra high friction HH rated brake pads remain a market leader above the rest as nothing else beats the performance of the Double-H Sintered Brake Pad.
Manufactured in the US in the state-of-the-art sintering plant in Ohio, Double-H Sintered Brake Pads perform well in all weather conditions be it dry or wet and have a high longevity lasting for many miles.

Ultra high-temperature sintered Neodymium magnets provide massive torque and linear power.
Optimized for power and efficiency in 1/10th scale vehicles.
Low-maintenance, unique Traxxas design with efficient, high-speed ball bearings.
Precision-balanced rotor with protective end cap.

Drop-in billet replacement for GM distributors with the small cap and external coil.
Factory style ignition module accepts factory wiring.
CNC machined billet aluminum housing and billet aluminum base.
Magnetic pickup and precision reluctor create stable trigger signals throughout the RPM range.
Oversized steel shaft is QPQ coated and guided by a sealed ball bearing and an extra long sintered bushing.