OEMTOOLS 27059 Pilot Bearing Puller Attachment, Pilot Bearing and Bushing Removal, Fits 5/8” x 18” or 3/4” x 16” Threaded Rods , Black

  • EASY TO USE: The slide hammer bearing puller can be used in four steps: Insert the pilot bearing puller, turn the attachment housing expanding both jaws against the pilot bearing, attach a slide hammer, and use the slide hammer to remove the bearing.
  • SAVE MONEY: Getting a pilot bearing replaced in an auto shop could cost you up to $650.
  • You can save hundreds of dollars by using this one pilot puller.
  • VARIETY OF USES: Not only can this pilot bearing tool be used as a bearing puller, but it can also be used as a bushing tool on starters and generators.
  • This pilot bearing removal tool will also fit any 5/8” x 18” or 3/4” x 16” threaded rods.
  • DURABLE: Made from steel, this bearing and bushing removal tool can withstand years of regular pilot bearing jobs.
  • This blind hole bearing puller is built to last.
  • DIMENSIONS: This pilot bearing remover is easy to store anywhere at just 10.4" x 3.4" x 1.3". The blind bearing puller is also easy to wield, weighing in at just 13.6 ounces, making it a great pilot tool.
Check Stock

DASBET 16PCS Blind Inner Bearing Puller Hole Remover Extractor Set Slide Hammer Tool Kit

  • 【Applicable】This inner bearing puller set is designed for loosening and pulling tight bearings and bushings, and fit for all vehicles 8-53MM bore bearing..
  • 【Instructions to operate】: How to use? Firstly insert the correct collet in the bore of the bearing and turn the nut to expand the collet till it is secure within the bearing.
  • Attach the small slide hammer and yank the weight towards the handle to give an extra snap of weight.
  • Repeat action until the bearing or bushing has been removed.
  • U-shaped bearing seal puller can be used by threading the bushing puller onto the collet and tightening the nut to slowly pull the bearing out of place..
  • 【Usage】This slide bearing removal tool is designed to quickly finish the job without damaging the removed parts or the tool. This small bearing puller tool is ideal for professionals and do-it-yourselfers..
  • 【Sturdy Construction】: Constructed of a strong, durable carbon steel, the bearing extractor tool is sure to pull even the toughest wheel bearing and bushings from tight positions. This blind bearing puller set has a long steel rod and a T-bar handle. The flared ends of the shop hammer weight provides a sturdy grip. The forged hardened steel and rust-proof finish help to increase pulling strength an....
Check Stock

2 pcs Brass Bearing Bushing,Inner diameter10mmx Outer Diameter 14mmx Height 20mm/Side Outer Diameter 22x2mm for Machining Router.

  • ✅ Material:Made of brass material, which is conductive, corrosion resistant, and non-magnetic..
  • ✅ Features: Bearing copper bushing Oil impregnation enables sliding velocity and makes them suitable for rotating applications..
  • ✅Most suitable for applications with rotating movements and where self-lubricating properties of the material are a prerequisit..
  • ✅ Versatile: Ideal for Used in micro motor, household appliances, electric tools..
  • ✅If you have any questions about the product, please feel free to contact us, and we will do our best to help you..
Check Stock

Monroe Shocks & Struts Magnum Light Truck 550064 Shock Absorber

  • Robust hydraulic lock-out: Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly - on most applications.
  • PTFE coated bearing: Reduces friction during operation between the rod and rod guide, improving durability - on most applications.
  • Tenneco shouldered bushings: Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability - on most applications.
  • Nitrogen gas-charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration.
  • Loop welding technique: Provide up to 14,100 lbs. (6,395 kg) tensile strength for maximum durability.
Check Stock

Monroe Shocks & Struts Magnum Light Truck 550061 Shock Absorber

  • Robust hydraulic lock-out: Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly - on most applications.
  • PTFE coated bearing: Reduces friction during operation between the rod and rod guide, improving durability - on most applications.
  • Tenneco shouldered bushings: Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability - on most applications.
  • Nitrogen gas-charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration.
  • Loop welding technique: Provide up to 14,100 lbs. (6,395 kg) tensile strength for maximum durability.
Check Stock

2 pcs Brass Bearing Bushing,Inner diameter4mmx Outer Diameter 8mmx Height 6mm/Side Outer Diameter 12x2mm for Machining Router.

  • ✅ Material:Made of brass material, which is conductive, corrosion resistant, and non-magnetic..
  • ✅ Features: Bearing copper bushing Oil impregnation enables sliding velocity and makes them suitable for rotating applications..
  • ✅Most suitable for applications with rotating movements and where self-lubricating properties of the material are a prerequisit..
  • ✅ Versatile: Ideal for Used in micro motor, household appliances, electric tools..
  • ✅If you have any questions about the product, please feel free to contact us, and we will do our best to help you..
Check Stock

Cal Hawk Tools CZTJWW Trailer Jack Wheel

  • 1200 pound capacity High-Density polyethylene caster with Zinc plated carbon steel bolt, bearing and bushing.
  • Bushing dimensions: 11/16" diameter x 2-1/8" long.
  • Bolt dimensions: 1/2" diameter x 3" long.
Check Stock

Michigan Motorsports LS1 LS3 Rocker Arms Bushing Trunion 4.8 5.3 5.7 6.0 LSX LQ9 LS2 LS3 LS7 Trunnion

  • Includes 16 Trunions, 32 Bushings, 32 Circlips.
  • Fits all OEM LS Rocker Arms. Replacement Trunnion Kit for LS Engines.
  • Micro-polished hardened shafts with C932 bearing bronze bushings.
  • LS1 Rocker Arms Bushing Trunion 4.8 5.3 5.7 6.0 6.2 LSX LQ9 LS2 LS3 LS7 Trunnion.
  • Our bushing gets more lubrication and has less load applied to it than the bushing in the small end of a connecting rod, giving it long service life..
Check Stock

BEARING BUSHING KIT | For Steering Column Intermediate Shaft Lower | 905-512 | w/Bushing Lube 2 YEAR WARRANTY REPLACEMENT !

  • 【 BUSHING / BEARING】Mounts in the lower steering column . . . . . . . ..
  • 【DIRECT REPLACEMENT】 . . . . .OE Quality. .Built to strict quality control standards.
  • 【KIT】Bushing Kit W/ shaft lube Plastic construction for long-lasting durability..
  • 【OE PART NUMBERS】 OE part number: 88963617 - 905-512.
  • 【VERIFY FITMENT : CLICK SEE BELOW **** PRODUCT DETAILS******.
Check Stock

ATPEAM 9-Way Slide Hammer Puller Set | Wrench Adapter Axle Bearing Hub Auto Set, Axle Front Rear Wheel Bearing Dent Hub Gear Puller Remover Set

  • ...a Durable: The ATPEAM slide hammer puller set is made of drop forged steel pullers and fully hardened shaft and accessories, this will pull the hardest wheel bearing and wheel hub out of the tight position, and make sure this tool set a longer lifespan..
  • A Complete Puller Set: 1x shank and T-bar assembly, 1x 4.8 lb. sliding hammer weight, 1x cross nut, 2x hub grappler adapter flanges, 1x large forcing screw, 1x cone, 1x 3-way puller head, 1x vise grip adapter with double lead thread, 1x seal hook adapter, 1x dent puller retainer, 1x self-tapping screw, 3x 5 inch (127 mm) internal and external jaw bars, 3x hex jaw nuts, 3x hex head cap screws, and 1x blow molded storage case..
  • Auto Body Repair Tool Set: The slide hammer bearing puller kits are body shop tools that are used to aggressively remove tightly jammed parts or dents.
  • slide hammers consist of a long metal shaft with an attachment point at one end, a heavyweight that slides along the shaft, and a handle with a stop on the opposite end.
  • this hammer tool slide kit includes 2 jaws and 3 jaw internal and external pullers, rear axle bearing puller tool, locking plier adaptor, puller hook, and auto dent puller tool.
  • Wide Application: The 9-way slide hammer puller set with 4.8 lb slide hammer is ideal fo....
Check Stock

E-cowlboy T-0220-39 Master Bushing Driver Set for Chrysler GM Ford Transmissions Bushing Bearing Seal Installer Remover Tool Kit (39 PCS)

  • 【Application】The custom bushing driver tool set is suitable for installing or removing wheel bearings, bushings, sealing rings and rubber. The tool is impact resistant and can be used with hydraulic presses and hammers..
  • 【Interchangeable】All 50 discs of the bush bearing and seal driver kit are interchangeable with each other and you can get 2,450 different size variations for quick work..
  • 【Quality Material】The bush removal puller bearing press tool is made of high-quality forged steel with a black anodized coating on the surface, effectively preventing rust and greatly extending the service life of the tool..
  • 【Custom Tool】8-65mm & 74mm metric discs. Each disc is marked with a scale for easy identification and reference. All metric discs, shafts, Allen keys, and screws remove or install bushings that are flush with the housing, allowing you to build your own custom bushing driver so that you always have the correct size for job..
  • 【Set Includes】The transmission wheel axle bearing seal installer kit includes: 48pcs*discs (18mm to 65mm with 1mm graduation) +1pc*disc (74mm) +1pc* handle/shaft +1pc*Allen wrench (3mm) +1pc*screw +1pc*storage box..
Check Stock

ROCKBROS Mountain Bike Pedals MTB Pedals Bicycle Flat Pedals Aluminum 9/16 Sealed Bearing Lightweight Platform for Road Mountain BMX MTB Bike

  • ...platform pedals supports the foot more evenly when riding, provide more comfortable riding experience for you. Perfect for most shoes size under US 12 shoes.Besides, Stainless steel anti-skids spikes on each side of the mountain bike pedals provide the good grip for you,the studs effectively prevent your shoes from sliding off.
  • ULTRA SMOOTH BEARINGS: The spindle was made of chrome-molybdenum steel material, which is stronger than ordinary steel and features better load-bearing performance. Carbon fiber bushing outside of spindle make it more durable and anti-corrosion,keep flat pedals spin smooth and without noise .And gasket design prevent the water,dust or sand from entering to the road bike pedals to avoid the noise.In addition, The outer surface of the bearing in the middle is also protected by aluminum alloy.
  • LIFETIME WARRANTY: ROCK BROS ensures you a risk-free purchase! We offer you a full money back with any questions. You can receive your full money back if our product does not live up to your expectations. Your satisfaction is our highest priority.
Check Stock

ROCKBROS Mountain Bike Pedals MTB Pedals Bicycle Flat Pedals Aluminum 9/16 Sealed Bearing Lightweight Platform for Road Mountain BMX MTB Bike

  • ...platform pedals supports the foot more evenly when riding, provide more comfortable riding experience for you. Perfect for most shoes size under US 12 shoes.Besides, Stainless steel anti-skids spikes on each side of the mountain bike pedals provide the good grip for you,the studs effectively prevent your shoes from sliding off.
  • ULTRA SMOOTH BEARINGS: The spindle was made of chrome-molybdenum steel material, which is stronger than ordinary steel and features better load-bearing performance. Carbon fiber bushing outside of spindle make it more durable and anti-corrosion,keep flat pedals spin smooth and without noise .And gasket design prevent the water,dust or sand from entering to the road bike pedals to avoid the noise.In addition, The outer surface of the bearing in the middle is also protected by aluminum alloy.
  • LIFETIME WARRANTY: ROCK BROS ensures you a risk-free purchase! We offer you a full money back with any questions. You can receive your full money back if our product does not live up to your expectations. Your satisfaction is our highest priority.
Check Stock