Categories

Best Slip Fit Exhaust Clamp

Roadformer 5" Exhaust Clamp Narrow Band Stainless Steel (2 Pack)

  • This 5" exhaust clamp is made in Stainless Steel. Used to joint 5 inch OD pipe slip fit into ID pipe for connection. Two pieces included in a single pack.
  • Pre-attached hardware for fast, easy and accurate installation, Roadformer Clamp technology provides simple, effective way to maintain and repair your exhaust system.
  • Grade 10.9 bolts provided superior capability of clamping and sealing. This narrow band clamp does create over a ton of clamping force without crushing pipes, resulting in strong and serviceable joint. The working torque is in the range of 40-50 ft-lbs.
  • Our innovation Reaction Block Technology provides a full 360-degree equal distribution of stretching force, prohibiting pipe distortion, durable installation without damage to pipe ends.
  • Roadformer Clamps set industry standard in premium quality and affordable price. Roadformer private labeled products do means Quality, Trust and Responsibility.
Check Stock

Granatelli Motorsports 302530 3.0' (76 mm) Electronic Exhaust Cutout System - Stainless Steel - Slip Fit w/ Band Clamp

  • 3.0″ (76 mm) Electronic Exhaust Cutout System – Stainless Steel – Slip Fit w/ Band Clamp.
  • Made to fit round 3 inch diameter exhaust pipe.
Check Stock

2PCS Exhaust Clamps 3 Inch Butt Joint Exhaust Pipe Muffler Clamp Band Stainless Steel Connection for Cars

  • Size: We offer you 2pcs exhaust clamps, which you can measure better before you buy. These fixtures feature a unitary construction that minimizes part count and maximizes material efficiency and weight..
  • Material: The band clamp is a wide band of metal, usually stainless steel, wrapped around the exhaust pipe joint. Our products are preformed rings and are now more commonly used in high-end aftermarket exhaust systems that use slip fit because they are relatively inexpensive and can be reused without damaging the pipe..
  • Flexible Disassembly and Repair: The butt strap clamp is a simple and effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Offering unique sealing and high clamping loads, it does not distort your exhaust components and provides flexible removal and repair..
  • Save Time and Effort: Distribute the clamping force evenly over the entire 360° range to prevent leakage and control material deformation. It is easy to install or disassemble with one bolt, saving time and effort. T-304 strip stainless steel and carbon steel galvanized hardware..
  • Satisfied Customer Service - Both product quality and payment, will always be guaranteed. We are responsible sellers, always providing high quality products a....
Check Stock

KAJIMOTOR Slip on Exhaust Motorcycle Muffler Tail Link Exhaust Midpipe System for Suzuki GSXR 600 GSXR 750 2006 2007 with Removable DB Killer Black

  • 【Suitable For】:Motorcycles exhaust pipe fit for Suzuki GSX-R600 GSX-R750 2006 2007..
  • 【Advantage】:Made of stainless steel.Make the muffler exhaust looks luxury and attractive..
  • 【Great Sound】:This exhaust slip on muffler sounds great..
  • 【Easy To Install】: The muffler exhaust relatively simple installation,Without looking at any instructions.No welding is required,The whole process should take you around 10-15 minutes..
Check Stock

Radiant Cycles Shorty GP Exhaust Motorcycle Slipon 2007-2017 Harley Davidson Fat Boy Fatboy FLSTF Chrome with Removable Baffle DB Killer Silencer

  • Fit: 2007-2017 Harley Davidson Fat Boy FLSTF FLSTFBS - The First & The Original - Equip your ride with a legit shorty motorcycle muffler that combines form and function. Founded in 2006, our brand is the pioneer in making slip-on motorcycle GP shorty exhausts..
  • A Sleek, Clean Look - Give your motorbike a striking appearance with this exhaust. It shows off a powder-coated chrome finish, which complements the color of your motorcycle's factory parts..
  • Fuss-Free Installation - Installing this motorcycle exhaust muffler won't take all day. Just remove your motorcycle's stock muffler, replace it with this exhaust, tighten the clamp, and you're all set!.
  • Heavy Duty Motorcycle Mods - You need a muffler that can keep up with you. This shorty GP exhaust is welded construction and designed to withstand the formation of rust or corrosion..
  • Customer Satisfaction - If, for any reason, you are unhappy with the quality of our shorty GP slip on exhaust, let us know within 60 days of purchase so we can provide a full refund or a replacement..
Check Stock

SEUNMUK 4 Pack 2.5 Inches Exhaust Clamp Sleeve, Stainless Steel Butt Joint Band Clamp Exhaust Coupler Exhaust Band Clamp Sleeve for 2.5-Inch OD Exhaust Pipes, Mufflers

  • ROBUST CONSTRUCTION - The stainless steel exhaust clamp is high-quality 304 stainless steel material, well polished with smooth mirror finish and high strength, which is solid and durable to last and can be reused for a long time..
  • EASY TO JOINT - No welding design, the joint exhaust band clamp features a practical components including bolts, nuts and I-block, you can easily mount or disassemble them, and you can also wrap some exhaust heat tape to enhance complete sealing..
  • TIGHT SEALING - Uniform distribution of clamping force will not crush the pipeline, which can provide tight seal and keep off exhaust and noise leakage. The exhaust band clamp sleeve can close fit on the exhaust pipes or mufflers..
  • PRACTICAL AND MULTIPURPOSE - 4 packs of joint exhaust muffler clamps is designed with 2.5-inch diameter and 3 inches length, which fits for exhaust pipes or mufflers, manifolds, catalytic converters of that with an outer diameter of 2.5 inches..
  • SATISFACTORY SHOPPING EXPERIENCE - If you have any dissatisfaction with exhaust clamp 2.5 inch, you will get a full refund within 30 days. If you have any questions about the product, please feel free to contact us, we will provide you with a satisfactory solution..
Check Stock

Tnuocke 2.0" Butt Joint Band Exhaust Seal Clamp Sleeve,50mm Stainless Steel Exhaust Sleeve Band for Exhaust Pipe, Muffler,Manifolds,Coupler H-031-50

  • Premiun Materials:The exhaust clamp is made from high quality stainless steel, stainless steel material, not easy to rust, corrosion-resistant,Precision-machined, shiny surface with no burr.
  • Prefect design:Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion.
  • Easy install:Put one of the nutbars on one side and insert the bolts, put another nut bar on, then screw the nuts, and connect.
  • Wide use:They are fit perfectly for exhaust tips, mufflers, cat back systems, racing exhaust.
  • Package:You will get 1 stainless steel Exhaust Band Clamp,The exhaust band clamp is reusable without damaging the pipes.
Check Stock

BLACKHORSE-RACING 3 Inch 76mm Stainless Steel V Band Bolt Clamp with 2 Male Female Flanges for Turbo Pipes SS V-Band Flange Kit

  • ▲ 3 INCH STAINLESS STEEL EXHAUST CLAMP KIT – Complete V-band kit is ideal for performance exhaust systems, catback exhausts, turbo back exhausts and more..
  • ▲ COMPLETE 3 PIECE KIT – This complete 3inch Vband kit includes 1x 3″ V-Band clamp which is designed to accommodate the 2x stainless steel 3″ Vband flanges.
  • 1 male flange and 1 female flange. This allows for the flanges to properly align during installation to insure a leak free seal..
  • ▲ DESIGNED FOR 3″ EXHAUST PIPES – This kit is specifically designed for 3″ exhaust pipes. The flanges feature a recessed opening which allows for a 3″ exhaust to easily slip inside the flange, providing a perfect overlap seam for welding..
  • ▲ PERFECT FOR TURBO AND HIGH HORSEPOWER VEHICLES – If you’re making a catback exhaust, turbo back exhaust, mid pipe, or up pipe for your car, truck, or other vehicle this V-band kit is ideal for connecting different pipe sections. Conventional exhaust flanges multiple nuts, bolts, washers and a gasket. A V-band kit eliminates all of these and allows for a connection with a single nut..
  • ▲ EASY ON, EASY OFF – A V-band kit allows you to connect or disconnect sections of your exhaust by removing a single nut. Conventionally exhaust flanges involve multiple ....
Check Stock

SPEEDWOW 2.0 Inch Butt Joint Exhaust Clamp Band Coupler Sleeve Stainless Steel 2 PCS

  • Exhaust clamp is used for 2.0 Inch OD to 2.0" OD exhaust pipe/muffler/catalytic converters connection,ect. Joint your exhaust tubing together quickly....
  • No welding design makes exhaust clamp fast, easy and accurate installation. Arc curved face,capability prevent exhaust gas and noise leaks. Exhaust....
  • The reaction block provides a full 360 °equal distribution of stretching forces, prohipiting pipe distortion while complesing a seal round the joined....
  • Application:Butt joint Exhaust Clamp suitable for exhaust system, muffler, stainless steel material, not easy to rust, corrosion resistance..
  • WARRANTY - SPEEDWOW provide 2.0 inch Exhaust Band Clamp with 5-month warranty.Any product problem, please feel free to contact us..
Check Stock

SPEEDWOW 3.0 Inch Butt Joint Exhaust Clamp Band Coupler Sleeve Stainless Steel 2 PCS

  • Exhaust clamp is used for 3.0 Inch OD to 3.0" OD exhaust pipe/muffler/catalytic converters connection,ect. Joint your exhaust tubing together quickly....
  • No welding design makes exhaust clamp fast, easy and accurate installation. Arc curved face,capability prevent exhaust gas and noise leaks. Exhaust....
  • The reaction block provides a full 360 °equal distribution of stretching forces, prohipiting pipe distortion while complesing a seal round the joined....
  • Application:Butt joint Exhaust Clamp suitable for exhaust system, muffler, stainless steel material, not easy to rust, corrosion resistance..
  • WARRANTY - SPEEDWOW provide 3.0 inch Exhaust Band Clamp with 5-month warranty.Any product problem, please feel free to contact us..
Check Stock

Motorcycle Slip On Exhaust Muffler,1.5-2\ Carbon Fiber Unversal Exhaust Slip on Silencers & Mufflers For Dirt Bike Street Bike Scooter ATV Racing Exhaust Pipes

  • 【Suitable for Various Bike Styles】：It is a universal slip on exhaust muffler that works with various bike including dirt bikes, street bikes, scooters, ATVs, quad and other bike with pipe diameter 38 mm to 51 mm. This is made possible by its welded stainless steel adapter which enables it to seamless blend fit pipes from 38mm to 51mm. Tips: But it is not fit for YZF R3.
  • CBR 1000 according to the product design.
  • 【Great Sound Quality With Removable Baffle】: This universal grom exhaust muffler sounds great. You’ll also love the excellent sound quality this exhaust system it delivers.You can use it with a baffle to experience low, deep sound. Or you can completely remove the baffle to make it sound LOUD!It has a fantastic sound and can easily transform your simple moped into a sport bike with deeper, fluttery sound when idling.
  • 【Stainless Steel & Aluminum Body】: The motorcycle exhaust come with Removable DB Killer that you can use it to control the muffler sound.
  • 【Extremely Easy to Install】: Installing the bike is also relatively easy as you just need to slip it right on and then install the bracket without looking at any instructions. It comes with a clamp and hardware for even easier, hassle-free installation. Th....
Check Stock

SPEEDWOW 2.5 Inch 2 1/2 Butt Joint Exhaust Clamp Band Coupler Sleeve Stainless Steel 2 PCS

  • Exhaust clamp is used for 2.5 Inch OD to 2.5"OD exhaust pipe/muffler/catalytic converters connection,ect. Joint your exhaust tubing together quickly....
  • No welding design makes exhaust clamp fast, easy and accurate installation. Arc curved face,capability prevent exhaust gas and noise leaks. Exhaust....
  • The reaction block provides a full 360 °equal distribution of stretching forces, prohipiting pipe distortion while complesing a seal round the joined....
  • Application:Butt joint Exhaust Clamp suitable for exhaust system, muffler, stainless steel material, not easy to rust, corrosion resistance..
  • WARRANTY - SPEEDWOW provide 2 1/2 inch Exhaust Band Clamp with 5-month warranty.Any product problem, please feel free to contact us..
Check Stock

ZOENHOU 4 PCS 2 Inch Butt Joint Exhaust Band Clamp, 304 Stainless Steel Exhaust Band Clamp Sleeve for Exhaust Pipe, Muffler, Headers, Manifolds, Coupler

  • PREMIUM MATERIAL - The 2 inch exhaust clamp is made from high quality 304 stainless steel, stainless steel material, not easy to rust, corrosion-resistant. Precision-machined, shiny surface with no burr. Inside diameter: 2 inches..
  • EASY INSTALLATION - Put one of the nutbars on one side and insert the bolts, put another nut bar on, then screw the nuts, and connect. It is removable, without welding, and saving time and effort..
  • WIDE RANGE OF APPLICATIONS - Butt joint exhaust clamp suitable for the exhaust system, pipes, muffler. Arc curved face, capability prevent exhaust gas and noise leaks. The exhaust band clamp is reusable without damaging the pipes..
  • PERFECT DESIGN - Our exhaust pipe clamp for exhaust provides a 360-degree full clamping area to generate overall sealing force without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections!.
  • WORRY-FREE SHOPPING - Please do not hesitate to contact us if any issues with our exhaust band clamp sleeve, you can get 30 days of worry-free refund, 7 days of 24-hour service after receiving it. Just remember that your satisfaction is our first priority..
Check Stock