Categories

Best Slotting Tool Holder

uxcell T-Slot Milling Cutters 3mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

  • T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
  • Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
  • Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
  • Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
  • Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
  • Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..
Check Stock

uxcell T-Slot Milling Cutters 6mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

  • T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
  • Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
  • Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
  • Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
  • Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
  • Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..
Check Stock

uxcell T-Slot Milling Cutters 4mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

  • T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
  • Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
  • Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
  • Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
  • Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
  • Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..
Check Stock

GBJ Face milling Holder 50mm/1.96\ CNC Face Mill End Milling Shell Cutter with APMT1604PDER -DP Shank Face Mill Arbor BAP400R 50-22-4T (BAP400R 50-22-4T+APMT1604PDER Yellow)

  • ☞About the 400R 50-22-4T Milling holder: 40Cr MnTi ,50mm/1.96" height and face diameter. Interface diameter: 22mm/0.86". Through heated and quenched, solid hard with good cushioning effect, Screw down insert..
  • ☞About the APMT1604 inserts: carbide inserts with CVD coating , Machining steel parts and iron ,PMKSH,For shoulder milling, face milling and slotting，HRC15°-55°.
  • ☞ Advantage：High vibration-absorbing performance, improve the surface finish of the workpiece, Great for shoulder milling, face milling and slotting.
  • ☞Material : Made from alloy steel hardened to HRC 52-56 ，90° Cutting angle ,Screw down insert.
  • ☞Package: 1x BAP 400R 50-22-4T Indexable End Mill with wrench + 10pcs APMT1604PDER BP010 carbide inserts.
Check Stock

GBJ 90 ° Indexable End Mill Holder BAP400R C24-25-200 APMT1604PDER Carbide Inserts Machining Steel,Iron Square Shoulder Face milling Slotting Milling Arbor (400R C25-25-150-2T+APMT1604PDER-DP Gold)

  • ☞About the APMT1604 inserts: carbide inserts with CVD coating , Machining steel parts and iron ,PMKSH,For shoulder milling, face milling and slotting，HRC15°-55°.
  • ☞About the 400R C24-25-200 -2T (0.98" Shank) Milling holder: 40Cr MnTi ,0.98" shank diameter , 0.98" cutting diameter, 7.87" overall length. Through heated and quenched, solid hard with good cushioning effect, Screw down insert..
  • ☞Material : Made from alloy steel hardened to HRC 52-56 ，90° Cutting angle ,Screw down insert.
  • ☞ Advantage：High vibration-absorbing performance, improve the surface finish of the workpiece, Great for shoulder milling, face milling and slotting.
  • ☞Package: 1x 400R C24-25-200-2T Indexable End Mill with wrench + 10pcs APMT1604PDER ZM1135 colorful hardened carbide inserts.
Check Stock

GBJ Face Mill Milling Holder End Mill Milling Shell Cutter with 10pcs APMT1604PDER R0.8 with BT40 FMB22-45L Shank Face Mill Arbor BAP400R 50-22-4T 50mm/1.96\ (Milling Cutter+10 Inserts+Arbor)

  • ☞About the 400R 50-22-4T Milling holder: 40Cr MnTi ,50mm/1.96" height and face diameter. Interface diameter: 22mm/0.86". Through heated and quenched, solid hard with good cushioning effect, Screw down insert..
  • ☞About the APMT1604 inserts: carbide inserts with CVD coating , Machining steel parts and iron ,PMKSH,For shoulder milling, face milling and slotting，HRC15°-55°.
  • ☞ Advantage：High vibration-absorbing performance, improve the surface finish of the workpiece, Great for shoulder milling, face milling and slotting.
  • ☞Material : Made from alloy steel hardened to HRC 52-56 ，90° Cutting angle ,Screw down insert.
  • ☞Package: 1x BT40-FMB22-45L +1× BAP 400R 50-22-4T Indexable End Mill with wrench + 10pcs APMT1604PDER BP010 carbide inserts.
Check Stock

Whiteside 6700A Slotting Cutter 1-7/8CD 1/16CL 5/16Bore 3Wing by Whiteside

  • Whiteside Slotting Cutter 6700A: 5/16"B, 0.062"CL, 3-WING.
  • Slotting cutters create a small slot in your project for various uses..
  • Made from solid alloy steel and micro-grain carbide..
  • Precision ground for proper balance at high RPM..
  • 6700A Whiteside Carbide Tipped Slotting Cutter 1-7/8CD 1/16CL 5/16Bore 3Wing.
Check Stock

Dremel 108 Engraving Cutter Gray

  • Our versatile and simple-to-use Engraving bits make it easy to express your creativity.
  • With these two rotary tool accessory bits, you can shape,....
  • Engraving bits work well for detailed material removal in applications like shaping, carving, engraving, hollowing, grooving, slotting, inlaying,....
  • APPLICATIONS: Engraving / Carving/ Etching (Teal color code).
  • Dremel accessories are also color-coded into usage categories, to find more Engraving & Carving accessories look for the Teal color code..
  • USA-BASED CUSTOMER SERVICE – Available by chat, email, phone or visit us at our service center in Racine, WI..
Check Stock

E-Outstanding Paper Quilling Tool 5 in 1 Different Size Quilling Slotted Tool, Ruler, Quilling Comb, Quilling Curling Coach and Tweezer for Art Craft DIY Handmade Tools

  • Material: plastic alloy steel, high-quality and durable quilling tools. The nib is made of high-quality elastic stainless steel material, which has strong toughness and is not easy to cause deformation..
  • Package contents:1PC needle tool, 1PC long groove tool, 1PC short groove tool, 1PC large groove tool, 1PC 9 mm groove tool, 1PC quilting paper ruler, 1PC quilting comb, 1PC stainless steel curved nozzle Tweezers, 1PC gauge.
  • Easy to use: 5-in-1 quilting paper slotting tools of various sizes, rulers, quilting combs, elbow stainless steel tweezers, rulers, whether you are a professional or a beginner, a complete quilting tool kit can satisfy All your needs make it easier and faster for you to make paper crafts yourself..
  • Wide range of uses: very suitable for enthusiasts to make or fix quilling paper, DIY paper crafts, quilling paper teaching, create different forms of flowers and leaves, suitable for cards, packaging decoration, decorative painting, ornaments, etc., a must for professionals or beginners tool..
  • Note: For safety, please keep it out of reach of children..
Check Stock

Rierdge 2Pcs Square Slot Cutter, Stainless Steel Precise Square Slot Cutter, Carving One Step for Oscillating Multi-Tool Saw Cutting Drywall Wood Plastic Electrical Boxes - Square + Rectangle (Black)

  • ... 【Easy to Use】Four sharp blades cutting at the same time, not only the cutting surface is very smooth and clean, but also saves time and effort. It makes the grooving work extremely easy..
  • 【WIDE COMPATIBILITY】The square drywall slotting tool is compatible with most 18v, 20v vibration multi-function tools on the market. Can be used to install antenna, automation, alarm, security, home-theater including CEDIA members, CCTV IP camera, drywall contractor, etc. These 2 common sizes can do most of the slotting work..
  • 【Rierdge Promise】 Any more questions about the item or you are not satisfied with your purchase at any point and for any reason, please don't hesitate to contact us. We will respond quickly within 24 hours!.
Check Stock

CNC Spoilboard Surfacing Router bit, 1/2'' Shank, 2'' Cut Dia, 1/2'' Cut Length, 4 Wings, Professional Woodworking Tools by KOWOOD PRO

  • KOWOOD PRO CNC spoilboard surfacing router bit is Much more smooth & 33% more efficient than others 3 wings CNC spoilboard bit..
  • KOWOOD PRO CNC spoilboard surfacing router bit is specifically designed and manufactured for the high quality demanded by woodworking industrial application.KOWOOD PRO carbide support this bit in heavy duty use and for long time use.
  • Versatile woodworking tool. This bit is not only specially for wood slab flattening, resurface or plane the top surface of the spoilboard, but also for trimming, slotting or grooving. Great replacement bit tool for woodworking carpenter.
  • Wide use application and suitable for woods, laminate, particle board, plywood compact panel.
  • Universal 1/2” Shank suitable for all major router or CNC machine.
Check Stock

Center Scriber Marking Tool Center Finder Woodworking Centering Tool Center Scribe for Any Board Up to 2 1/2” Wide TSAIYOGA-2PCS Fits #2 & Mechanical Pencils

  • Handy: Any board thickness is up to 2 1/2”  wide. Center scriber is suitable for Mechanical and #2 pencils..
  • Accurate: Center scribe draws the centerline accurately, also draw 8 different sizes edge  1/16" 3/16" 5/16" 7/16" 1/8" 1/4" 3/8" 1/2" edge..
  • Magnet: The scribe tool is equipped with a magnetic block that can be adsorbed on the metal surface or nails..
  • Material: The centering tool is made of environmentally-friendly ABS plastic and is durable..
  • Applicability: The woodworking center finder is suitable for plate slotting, cutting plate, pin connection, assembly work, marking out mortises and....
Check Stock

Maxmartt 5pcs ISO30 Tool Holder Clamp Cradle Claw Set CNC Machines Automatic Tool Changer

  • tool holder 100% brand new and high quality..
  • cnc tool holder Designed for any type of ISO30 tool holder and automatic tool change system..
  • iso30 tool holder clip Professional manufacturing, perfect match with the tool holder..
  • iso30 tool holder clamp Made of high quality PVC material, wear resistant, heat resistant..
  • clamp tool holder Stable performance, anti-aging, acid and alkali resistant..
Check Stock