GemRed 82412 Mini Digital Level Angle Gauge Angle Finder Protractor Inclinometer Aluminum Framework with Magnet
- 【Great Repeatability and Consistency】This angle gauge is designed with accuracy of ± 0.2° and the resolution is 0.1°. The measuring range: 0 to 360° (4*90°). Display unit: DEGREE only. It provides convenience in woodworking, construction, machinery, telecommunications, automobile etc. It is pre-calibrated in factory..
- 【Strong Aluminum Framework&Magnetic Flat Base】The digital angle gauge applied sturdy aluminum alloy instead of plastic for the main framework. It’ll provide years’ usage.【Two Measuring Mode】①Checking the true level. ②Checking the relative angle between two surfaces..
- 【Lower Power Reversible LCD Display with ERROR indicator】 The Digital Angle Gauge has a large LCD display with backlight, which only needs one battery for providing accurate, quick and clear measurements and even you can easily read in dark environment. If the digital angle gauge is used in an incorrect position (e.g. tilts diagonally over 30 degree), display will tell ERROR to make sure that use is getting the accurate measurement..
- 【Easy Battery Installation】You can install battery easily and need no screwdriver. WIth only one AAA battery, the digital angle gauge works 50 hours averagely. *Automatic shut-off after 5 minutes..
Check StockDrill Angle Gauge, 3Pcs Drill Bits Angle Gauge Set Dirll Sharpener Tools S/S Angle Measuring Gage Drill Bit Angle (60 °, 70 °, 90 °, 110 °, 118 °, 125 °, 135 °, 150 °, 160 °)
- 【Material】: This Angle gauge set is made of high quality stainless steel, high hardness, and durable in use..
- 【Design】: It is a practical Angle gauge set in drill bits Angle measuring and drill sharpener inspection,and comes with a case, convenient for carrying out..
- 【Feature】: Diameter drill front edge of the protractor 50 gauge 118 ° apex angle of twist drills grinding gauge suitable for 118 ° apex diameter of not more than 50mm of grinding twist drills..
- 【Drill Apex Angle】: Check the drill apex angle (60 °, 70 °, 90 °, 110 °, 118 °, 125 °, 135 °, 150 °, 160 °). Cutting tool angle is 60 degrees for a tooth-shaped angle 55 degree angle and metric thread, inch thread inspection, blade and special measuring tools for measuring angles.
- 【Usage】: Suitable For: Angle measurement.
Check StockAngle Gauge Drill Bits, 3Pcs S/S Angle Gauge Measurement Drill Sharpener Tool Set Including Drill Diameter, Drill Bits and General Angle Gauge with Case
- Professional Measurement Tool: This is a practical set of angle gauge set in drill bits angle measuring and drill sharpener inspection.
- Professional and Standard Parameters: 60 Degree cutting tool for the inspection of tooth‑shaped 55 degree angle and metric thread and inch thread, and also it can measure blade angles.
- Comprehensive Angle Range: This set of drill bits gauge has a comprehensive angle range: 60 °, 70 °, 90 °, 110 °, 118 °, 125 °, 135 °, 150 ° and 160 °.
- Suitable Utilization: Diameter drill front edge of the protractor 50 gauge 118 ° angle twist drills grinding gauge is suitable for 118 ° diameter of less than 50mm grinding twist drills.
- Durable for Long-Time Use: Made of high quality stainless steel, this set of angle gauge has high hardness, and it is durable for long-time use.
Check StockProster 200mm 360°Angle Finder Data Hold LCD Angle Ruler One Key Zeroing 80mm 3 1/8\ Magnetic Height Gauge Depth Gauge for Woodworking Construction Home Decoration
- 【Accurate Angle Finder】200mm stainless steel ruler to measure length (metric and imperial), 360°angle sensor for relative and absolute angle measurement inside and outside, Range:0-360°,Resolution:0.05°,Accuracy:±0.3°,Repeatability:0.05°..
- 【One-key Data Hold & Zero Reseting】Knob locked one-key data hold function for both angle/depth gauge to hold the angles/depth measured at any time.
- Zeroing reset button at any angle for relative measuring..
- 【Multi-function Magnetic Height Gauge】3-In-1 Height/Depth/Thickness Gauge,easy to measure bore/slot depths with plunger, one key mm/inch/fraction switch, range: 80mm, resolution: 0.05mm, accuracy: 0.10mm for routers horizontal/vertical measure with self standing magnetic feet..
- 【LCD Display & Stainless Steel】Sturdy plastic thickness gauge for with quick-reading digital LCD display, harden stainless steel angle finder ruler and depth ruler provides lifelong service..
- 【Wide Applicatoion】This angle finder with magnetic height depth thickness gauge is especially designed for Woodworking, Construction, Home Decoration, Table saws, Hand Routers, Etc..
Check StockCalculated Industries 7489 AccuMASTER Value Pack – 2-in-1 Digital Angle Gauge plus the Digital 7-Inch Angle Finder Ruler | Accurate Precision Tools for Carpenters, Woodworkers, Fabricators | 2-Pieces
- VALUE PACK INCLUDES – A precision tools combo of the Digital Angle Finder Ruler and the 2-in-1 Digital Angle Gauge. Perfect for the pro or hobbyist who needs to transfer true level and precise angle settings to their saws.
- TOOLS USED TOGETHER – the Angle Finder Ruler enables you to determine the angle of your workpiece that you need to match. The Digital Angle Gauge helps you transfer that angle to your saw or other tool so your finished cut installs perfectly.
- DUAL FUNCTIONALITY – Angle Gauge works as an inclinometer or tilt gauge to set or check relative angles between surfaces, also works as digital level for tight spots with bright backlit Stay glow display, strong magnetic base, dust/water resistant.
- ANGLE FINDER RULER can be reset to zero at any position for simple relative or differential angle calculations. Large LCD display HOLD lets you freeze a display value. Full-range protractor measures 360° for both inside and outside angles, 7-inch ruler arms.
Check StockLaser Angle Finder Line Digital Level Tool, Woodworking Tools, 5-Side Magnets Miter Saw Protractor, Electronic Level, Measures & Sets Angles, Hanging Pictures, Carpenters, Class II line
- 【This Is No Ordinary Angle Measuring Tool】You're probably familiar with digital angle gauges but not like this one.
- It comes with a built in laser line, large, easy to read..
- 【Get Accurate Measurements With Ease】The digital level and angle gauge may be small in size, but it's big on convenience.
- This angle finder tool measures, sets, angles laser line, which will also tell you if a surface is level..
- 【Blending Convenience With Comfort】The pocket level and angle finder features sturdy V groove edges, a strong 4-side magnetic base . When upside down, the LED display auto rotates, so you'll always have a clear view.
- All of this in a device that fits in your pocket or the storage bag that comes included..
- 【Used In Many Settings】Turn to this mini digital level angle gauge for straightforward tasks like leveling pictures on a wall and more complex jobs like working with landscape drains, gutters, or measuring pinion angles on a car.
- This tool is used for woodworking, plumbing, construction, machinery, telecommunications, automotive, and more..
Check StockDWE7402DI Dado Throat Plate, Table Saw Parts Insert Accessories Replacement for 10-Inch Portable Table Saw DEWALT DWE7490, DWE7491 Versiones
- ❤ [A good helper for table saws] If you have a table saw and need to cut at any angle, then you will know the value of a miter gauge. You may also know that the miter gauge that comes with the saw is not very accurate or durable. Not to mention the fit in the miter groove may not be so good. And our high-quality miter gauges can meet your table saw cross-cutting needs..
- ❤[High-quality material] The guide rod and baffle of the table saw miter gauge are made of all aluminum to ensure its durability and firmness, rust and wear resistance, and the table saw miter gauge fence is made of aluminum alloy die-casting, which has better accuracy. high..
- ❤[With clamp] The table saw miter gauge is composed of a miter gauge clamp, a material baffle, and an angle push plate. The clamps can be adjusted by screws to fix different cutting objects, which is not possible with other mitre gauges without a holder. The bottom of the mitre gauge is equipped with a 5/8 groove for the mitre gauge, and the all-aluminum slide bar slides smoothly ..
- ❤ [Easy to operate] The miter gauge is cut at a precise angle of 60° on both sides with pointers. If you need to adjust the head, you only need to loosen the column knob and rotate the head to the desired position, so loosen th....
Check Stock10 Inch Super Gauge Shape and Outline Tool, Contour Gauge Profile Tool with Lock, Measuring Tools Shape Duplicator Woodworking Tools
- ...sm. The lock also has a newly designed ergonomic shape. Easy to adjust when tracing multi angle shapes, easy to lock and accurately duplicate the shape for your needs, and also easy to unlock supergauge xl for next time use or storage..
- [Adjustable Tightness]: Comes with a small screwdriver, the tightness of the superguage can be adjusted by screwing the 2 screws on the end. No need to worry about the plastic pins is too loose or too tight to slide in. You can adjust the tightness according to your needs while using. If the plastic pins is a little loose after being used for a long time, you can also adjust the tightness for your preferences..
- [Durable Material]: The super gauge tool is made with high quality ABS plastic, would not scratch the surface of the object being duplicated. Unlike metal contour gauge, the contour gauge with lock is waterproof and rustproof. With high strength and durable material, our contour gage would be the great useful cool gadgets for men..
- [Both Sides Measurements and Dual Scales]: The profile gauge tool has INCH&CM scales on both sides, makes it easier to measure and record numbers. With....
Check Stock75x25x36 AP30 Stainless Steel Angle Gauge Precision Micro Block Milling Adjustable Angle V Block Milling
- 【PREMIUM STAINLESS STEEL】Our angle v block milling is made of high-quality stainless steel. This angle gauge has the advantages of surface hardening and durability.
- 【NICKEL PLATED WORKING FACE】We carry out nickel plating treatment on the working surface of each degree angle plate angle, and the parallelism and perpendicularity of the rust removal of this adjustable angle v block are finely ground to 0.01mm.
- 【FIXED ANGLE PROCESSING】This precision gauge can use the cursor to indicate the stepless tilt adjustment angle, and then fix it with screws to make various fixed angle processing and inspection workpieces.
- 【ANGLE V BLOCK】The corner V-shaped block has the characteristics of high precision and easy operation. This micro v block milling can meet your various work needs.
- 【WIDELY USED】This high precision angle gauge uses adjustable angle grinders and adjustable blades on milling machines, planers, and drilling machines. After the workpiece is processed, this stainless steel block milling crosses or clamps the workpiece with other fixtures, such as processing inclined planes, inclined hole drilling, etc.
Check StockMiter gauge,Table saw miter gauge,Table saw fence system,Miter gauge table saw accessories,With clamping device,Precision Miter Gauge,For table saw 5/8 slot with miter gauge fence
- ❤ [A good helper for table saws] If you have a table saw and need to cut at any angle, then you will know the value of a miter gauge. You may also know that the miter gauge that comes with the saw is not very accurate or durable. Not to mention the fit in the miter groove may not be so good. And our high-quality miter gauges can meet your table saw cross-cutting needs..
- ❤[High-quality material] The guide rod and baffle of the table saw miter gauge are made of all aluminum to ensure its durability and firmness, rust and wear resistance, and the table saw miter gauge fence is made of aluminum alloy die-casting, which has better accuracy. high..
- ❤[With clamp] The table saw miter gauge is composed of a miter gauge clamp, a material baffle, and an angle push plate. The clamps can be adjusted by screws to fix different cutting objects, which is not possible with other mitre gauges without a holder. The bottom of the mitre gauge is equipped with a 5/8 groove for the mitre gauge, and the all-aluminum slide bar slides smoothly ..
- ❤ [Easy to operate] The miter gauge is cut at a precise angle of 60° on both sides with pointers. If you need to adjust the head, you only need to loosen the column knob and rotate the head to the desired position, so loosen th....
Check StockDCT Taper Gauge Jig Tool Kit Set for Tapering (Angle Cutting) Wood Tapered Legs and More on Radial Arm or Table Saw
- ...ows you to make adjustments to change the angle to your fence so you saw safely with a consistent and reproducible taper.
- EASY TO USE: Mark your piece of wood with the angle cut you want to create, set the taper jig next to the piece of wood and measure the distance from the marked angle to the taper jig on both the small and large sides of the marked angle, adjusted taper width until both measurements are equal, set the taper guide against the fence and board against taper guide, align marked angle line to saw blade, and cut moving both the taper guide and wood piece along saw.
- CONTENTS: Package includes (1) pair of jig legs, (1) scale, (1) locking bracket, (1) work stop, (1) handle, assembly hardware, and assembly instructions.
Check StockDeWalt 5140032-78 Replacement Table Saw Miter Gauge
- The purpose of a miter gauge is to allow user to position and safely guide the workpiece. This replacement miter gauge is simple to install, which minimizes downtime..
- The miter gauge only fits DeWalt DWE 7490X Type 1, DWE 7490X Type 2, DWE 7491RS Type 1, DWE 7491RS Type 2, WE 7499GD Type 1, DWE 7499GD Type 2.
- The miter bar swize is 22.5mm x 9.2mm x 300mm(W x H x L)..
- There are lines for every one angle on miter gauge body, including larger lines at the five degree marks( 30, 45, 60, 75 and 90 ).This allows you to adjust the miter gauge to any angle you need..
Check StockPerformance Tool W485 Pocket Precision Reference Cards Kit Set, 1 Pack
- Card (1) Includes: AWG wire gauge, nail gauge, SAE and MET hole gauges, and pipe diameter gauge.
- Card (2) Includes: SAE and MET rulers, angle gauge, radius gauge, circle compass, drafting shapes and curves.
- Card (3) Front Includes: Angle formulas, geometric formulas, standard abbreviations, fraction to decimal equivalents, and wood measuring chart.
- Card (3) Back Includes: Compass rose, electrical abbreviations, roman numerals, and conversion charts.
- Conversion Charts Include: Speed, temperature, distance, time, power, weight, fluid, torque, area, and volume.
Check Stock