Categories

Best Small Chucking Reamer

5/8 Bridge Reamer Bridge/Construction Reamer 1/2 Shank M2 HSS Taper Chucking Reamer Bit Tool for Steel Metal Alloy Wood Plastic Drilling Hole

  • Material: 5/8 bridge reamer is made of high-quality M2 HSS steel, with high toughness, high-temperature resistance, corrosion resistance and long service life. Compared to other commonly used low-grade high-speed steels, M2 has an increased content of tungsten and molybdenum, both key elements for improved durability.
  • Wide Application: HSS bridge reamers can enlarge or align existing holes and are suitable for various materials such as aluminum, brass, bronze, cast iron, copper, iron, metal, nickel, plastic, steel and other structural materials Note: It requires existing holes Or a pilot hole is required.
  • Size Infor: Length of chucking reamer is 6.5 inch.
  • Safe to Use: Designed with helical flutes and safety stops to keep chips away from the operator. The safety collar stops to prevent over-penetration and loss of operator stability.
  • Design: The tapered tip design allows the reamer to fit into unevenly overlapping holes, aligning the bolt holes. The 5/8" bridge reamer is not a drill, it just aligns the reamer with the pre-drilled hole.
Check Stock

uxcell 3/8\ 5/8\ 1/2\ 3/4\ Chucking Reamer H7 Accuracy High Speed Steel Lathe Machine Reamer 6 Straight Flutes Round Shank Milling Cutter Tool 4pcs

  • Chucking Reamer: Size: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm.
  • tolerance: H7. Features just the base substrate without any additional coatings, good for wide ranges of applications.
  • Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications.
  • Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness.
  • Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications.
  • How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic.
Check Stock

TTC .124 -.501 14 Pc Over/Under HSS Straight Flute RH Chucking Reamer Set

  • Type- Straight Flute Chucking Reamer Bits.
  • Application- Widely used for bore machining, installed in drilling machine, milling machine, etc.
  • Processed surface of iron, plastic, wood, copper, aluminum and other soft materials.
  • Quantity- 10 Pieces. Shank Diameter-3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm,11mm,12mm.
Check Stock

Prolinemax 14 Pc 0.124-0.501\ HSS Chucking Reamer Set Straight Shank Flute Decimal Sizes

  • Sizes: 0.124'' 0.126'', 0.1885'', 0.1865'', 0.251'', 0.249'', 0.3115'', 0.3135'', 0.374'', 0.376'', 0.4365'', 0.4385'', 0.499'', 0.501''.
  • Wooden Case Overall Dimension: 9-3/4''L 8''W x 1-1/4''H *Estimate Only*.
Check Stock

uxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H8 Tolerance (2mm 3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm) 9pcs

  • Chucking Reamer: Size: 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm.
  • tolerance: H8. Features just the base substrate without any additional coatings, good for wide ranges of applications.
  • Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications.
  • Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness.
  • Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications.
  • How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic.
Check Stock

uxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H8 Tolerance (3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm 11mm 12mm) 10pcs

  • Chucking Reamer: Size: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm.
  • tolerance: H8. Features just the base substrate without any additional coatings, good for wide ranges of applications.
  • Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications.
  • Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness.
  • Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications.
  • How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic.
Check Stock

8pcs Reamer Set, HSS H8 Straight Shank Chucking Machine Cutter Milling Reamer Kit 3/4/5/6/7/8/9/10mm

  • Type- Straight Flute Chucking Reamer Bits.
  • Application- Widely used for bore machining, installed in drilling machine, milling machine, etc.
  • Processed surface of iron, plastic, wood, copper, aluminum and other soft materials.
  • Quantity- 10 Pieces. Shank Diameter-3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm,11mm,12mm.
Check Stock

Reamer Set, 10Pcs HSS H7 Machine Cutter Straight Chucking Milling Reamer Kit, Reamer Metric, Milling Machine Cutter, Reamers for Metal 3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm 11mm 12mm

  • 0.196" diameter (+.0003"€/-0"€) carbide tipped chucking reamer.
  • 1 1/8" length of flute with 1/2" carbide length.
Check Stock

The Pampered Chef Juicer 2305

  • Quickly juice small or medium citrus fruit.
  • Bottom has rubberized nonskid ring to reduce slippage.
  • Plug and seeds are retained on the reamer allowing accurate measurement of juice up to 8 ounces.
  • Reamer can be positioned to either strain or simply pour juice.
Check Stock

Dophee 8Pcs Socket Adapter Impact Hex Shank Drill Bits Power Extension Bar Set 1/4\ 3/8\ 1/2\ Bits

  • 6" extension threads into 9" chucking extension for 15" length.
  • Drill bit extension set has male and female thread size of 1/4-28.
  • Drill extension set is black oxided to prevent corrosion and enhance appearance.
Check Stock

OXO Good Grips 2-in-1 Citrus Juicer

  • Snap on the small reamer for lemons and limes, or the large reamer for oranges and grapefruit.
  • Measurement markings up to 1. 5 cups/350 ml.
  • Bpa-free body shaped for a comfortable grip.
  • Reamers snap off for cleaning and nest for storage.
Check Stock

Wooden Citrus Reamer Lemon Juicer in 2 Sizes 2 Pieces

  • Citrus Juicer: Make a wide variety of lemonade, marinades, seafood dishes, and everyday recipes with these small juicers.
  • Multi-Purpose: The hand citrus reamer can be used for pomegranates, oranges, limes, and grapefruit.
  • Easy To Clean: Our wooden citrus reamer is an ideal alternative to electric juicer machines or blenders.
  • after use, hand wash the fruit juicer with....
  • Reliable Quality: The cold press juicers are made from high-quality schima wood that is resistant to damage caused by citric acid within the fruit.
  • The Perfect Size: The small citrus reamers come in 2 assorted sizes: 1.5 x 1.5 x 6.2 inches and 1.3 x 1.3 x 4.3 inches.
Check Stock

Juicer Attachment for Kitchenaid Stand Mixer with 2 Size Reamer,Juicer for Kitchenaid Stand Mixer Citrus Juicer Attachment Accessories by InnoMoon

  • ...cer tasks, also fits Cuisinart stand mixer SM-50, SM-50BC, SM-50R, get juicing directly into a bowl, pitcher or cup(yet this accessories is not created by KitchenAid).
  • Extracts The Most Juice Possible: This juicer attachment for kitchenaid stand mixer come with 2 versatile reamer, Large Juicer Reamer for citrus fruits like oranges and grapefruits, Small Juicer Reamer is suitable for small limes and lemons. Press your fruit halves against it when the mixer working, and the juice will pours out.
  • Obtained patent certification: Integrated design with shaft and housing, easy to install and clean, also more durable to use, the hanging buckle make it more convenient to hanged or stored.
  • This juicer attachment for kitchenaid stand mixer also has smarter design with a deep depth housing(3.54inch/9cm), catch juices during working better, no more juice splashing issue like other juicer, great to be used with various types and sizes of fruit.
  • Humanized design: This juicer attachment for kitchenaid stand mixer comes with strainer Basket catches seeds and pulp as it extracts juice from the reamer, larger basket area and deeper basket de....
Check Stock