Categories

Best Small Motors

Five Oceans FO4205 Marine Boat Adjustable Outboard Motor Bracket, Heavy Duty, AISI316 Stainless-Steel Fine Polished for 2 and 4 Stroke Outboards Up to 130lbs 60kg, Black Poly Mounting Board 25HP

  • Heavy-duty structure made of AISI3616 polished stainless steel. Extra-wide 10-1/4 inches x 7-1/2 inches black poly mounting board for the new wider style motor locking clamps Transom Plate Measures: 4-3/8 inches x 4-7/8 inches.
  • They are designed for 4-stroke motors. Accommodates long or short shaft motors. New, ergonomically designed twist lock safety knobs secure bracket in place.
  • Suitable for motors up to 25HP with a maximum weight of 130 pounds. Designed to resist the harsh conditions of the marine environment. Ideal for Fishing, Pontoon, small power, sailing boats.
  • Built especially for new 4 strokes, heavier, high torque motors. Allows you to raise and lower trolling and auxiliary motors with ease.
Check Stock

Watersnake Venom Swet 54 Pound Thrust 12V Electric Trolling Motor with 42\ Steel Shaft

  • STURDY SIMPLE DESIGN: Our Watersnake Venom SXW electric motors provide saltwater anglers with a versatile range of tiller-steer transom-mount motors that are loaded with clever features. The shafts on all Venom SXW motors are an extra-tough composite constructed specifically for use in saltwater marine environments. The tiller handles are telescopic for versatility, comfort and control..
  • CONTROL + FEATURES: The 34lb motors have a two-blade propeller. The 54lb motors each run a three-blade propeller. All propeller shafts are stainless steel and the props have a weedless design, so you can push the boundaries during your next adventure. All the motors run on 12V power and operate with 5 forward and 3 reverse speeds, which are controlled with the tiller handle throttle..
  • ELECTRIC POWER: 54 lbs thrust, 12 Volt motor, 13-54 Amps / 34 lbs thrust, 12 volt motor, 7.5-34 amps. Battery Not Included. Each motor is suited to boats ranging from small tenders and tinnies up to dedicated estuary and inshore sportfishing boats..
  • VERSATILE TRANSOM MOUNT: The compact and stylish new Venom motor head design incorporates a new thicker ergonomic grip for the tiller handle. The new head design also includes a digital voltage meter display, so you can keep track of your batte....
Check Stock

8pcs 8520 Motor 8.5x20mm 15000KV Brushed Motors 4CW 4CCW Coreless Motor with JST-1.25 Connector for D JI Ryze Tello 720P Camera WiFi FPV RC Quadcopter M80S E013 Plus Tiny 8X Frame Kit etc

  • [Basic Edition] - These 15000KV 3.2V/ 49000 RPMcoreless motors provide extra power to fly with FPV camera.
  • [Lightweight] - These blade inductrix motors' weight is about 5.38g/pc (including cables and connector).
  • [Tiny and Portable] - These coreless tiny whoop motors' Shaft Diameter: 1.0mm, Motor Diameter: 8.5mm, Motor Length: 20mm, With 1.25mm JST Plug.
  • [Small but Powerful] - These coreless motors can deliver high efficiency and constant power for a stable flight.
  • [Widely used] - This upgrade 8.5x20mm 15000KV brushed motors is compatible for Tiny 8X frame, M80S, E013 Plus and D JI Ryze Tello 720P Camera WiFi FPV RC Quadcopter.
Check Stock

XMSound 1500GPH 12V Electric Marine Submersible Bilge Sump Water Pump for Boat Yacht

  • Small size, high efficiency, low current (low cost switching power supply supporting).
  • to achieve a small size perfect combination of high flow.
  • Silent and vibrationless operation. Stainless steel shaft, completely submersible, rust and corrosion protection, need a separate float switch.
  • hose barb discharge outlet:1-1/8 inch (29millimeter).
  • Heavy duty motors, offer high capacity output Water cooled long-life motors.
  • Ignition protection Water/moisture tight seals.
  • Snap lock strainer base for easy installation and removal.
Check Stock

Ironwood Pacific HelmsMate Tiller Extension Handle U | Universal Joint Model | 37\-51\ Extendable

  • Full steering and throttle control while sitting away from your trolling or small outboard motor.
  • Fits gas and electric outboard boat trolling motors 15HP and under.
  • Anodized aluminum, corrosion resistant fittings and unbreakable nylon clamp are designed to last.
  • Designed to fill tiller handles on all electric and gas outboard motors 15 hp or under.
Check Stock

DGZZI Gear Reduction Motor Holder 1Set Black 37mm DC Geared Motor Mounting L Shaped Bracket with 6mm Hexagonal Coupling and Mounting Screws

  • Wear-resistant and not easy to rust, durable and not easy to bend. Black plating makes it more stylish and chic..
  • The metal motor bracket has mounting holes for easy installation. The precise mounting holes match the M3x6mm screws perfectly, which saves you more installation time..
  • Convenient mounts are suitable for these small motors.Ideal for many hobbies and alternative applications such as model cars and robots.Ideal for 37mm pinion stepper motors..
  • Can be used for 37mm gear motors. Suitable for fixing 37GB, 37GA gearbox..
  • Packaging Includes:1PC 37mm DC gear reducer motor mount,1PC 6mm hexagon coupling,2PCS hex coupling screws,10 sets of mounting screws and nuts..
Check Stock

Cutex Silicone Sewing Thread Lubricant 28 Oz Bottle

  • Labelle #108 fine motor oil for “Z” / “N” / and small “HO” locos.
  • –Other uses: Tiny Fractional Horsepower motors, tiny bearings, sewing machines, smaller Fishing Reel mechanisms, drawer slides door and window locks, precision instruments, and small Clock & watch mechanisms..
Check Stock

ALAMSCN 6PCS DRV8833 Motor Driver Module 1.5A 3V 10V 2 Channel Dual H Bridge Gear Motor Drive Controller Board

  • It can drive DC motors and 4-wire stepping motors with current less than 1.5A..
  • Built-in over-current protection, short-circuit protection, under-voltage lockout and over-heat protection, with low-power sleep mode..
  • Small size, easy to operate, can be used in DIY smart car robot..
Check Stock

6 Pack Mini L298N DC Motor Driver, MELIFE MX1508 Mini Dual Channel 1.5A 1.5A 2 Way PWM Speed Controller Dual H-Bridge Replace Stepper

  • Motor drive module is ideal for use in battery-powered smart car, toy cars, robots..
  • Dual H-bridge motor driver, can drive two DC motors or a 4-wire two-phase stepper motor..
  • Supply voltage 2V -- 10V, can drive two DC motors or a 4-wire 2-phase stepper motors ,can achieve forward rotation or reverse rotation, it is possible to adjust the rotation speed..
  • Dual 1.5A * 2, the peak current to be 2.5A, built-in thermal protection circuit, do not be afraid motor stall burned, automatic recovery after the temperature dropped..
  • Use of imported original chip, built-in low on-resistance MOS switch, minimal heat, no heat sink, small size, low power consumption, is ideal for battery powered..
Check Stock

ISURE MARINRE Aluminium Boat Outboard Motor Bracket Kicker 7.5-20HP Heavy Duty Trolling Yacht

  • ➤Material: Anodised aluminium construction，solid polypropylene mounting board..
  • ➤Suitable for 2-stroke 7-1/2-20HP motors, with a maximum weight of 52kg (115lbs), very suitable for small and medium motor boats and yachts..
  • ➤Mounting holes have a horizontal distance of 100mm across (centre to centre), and multiple vertical holes for different mounting options..
  • ➤Sturdy design with smooth, spring-assisted lifting action Fully adjustable with 5 stop locations..
  • ➤Retractable bracket for trolling auxiliary motors on power and sailboats with ease, Heavy duty with reinforced welded frame and stamped stainless components..
Check Stock

Johnson Pumps - 22102 PROLINE Bilge Pump 1000 GPH 2.5A

  • No one wants to worry that their boat is slowly taking on water because the bilge pump has failed. Well, you can sleep soundly with the reliable 2000 bilge pump on the job.Small size, high efficiency, low current (low cost switching power supply supporting).
  • to achieve a small size perfect combination of high flow..
  • It is non-automatic and must be paired with a float switch or sensor and ON/OFF/AUTO switch. Unique automatic "discharge" function can bear the long-term continuous operation under nearly congestion condition Impact resistant ABS housing.
  • Used in a boat,you can also use it in solar powered waterfall for your backyard, in a battery back-up sump system,etc. It empties the bilge roughly 25% faster than 1500gph bilge pump,and will continue to pump even when it encounters some minor debris.
  • Heavy duty motors with stainless steel shafts and tough. thermoplastic bodies submersible bilge pumps are tough enough for any bilge.Tough, efficient, long life motor.Offer high capacity output Water cooled long-life motors.
  • Ignition protection Water/moisture tight seals.
  • Snap lock strainer base for easy installation and removal.
Check Stock

70W Concrete Vibrator Vibration Motor Single Phase AC 110V 3600rpm Aluminum Alloy Vibrating Vibrators for Shaker Table (70W)

  • 【30-100W Multi-choice Vibration Motor】30/40/50/60/70/80/90/100W AC 110V various power vibration motors. We provide various power vibration motors, of which there is always one you need ..
  • 【High-quality Material】The shell is made of aluminum alloy, light weight (the lightest 1.75KG to the heaviest 2.47KG), fast heat dissipation and low temperature rise to ensure normal operation..
  • 【High Performance】Thick terminal, fixed casting junction box, strong power, stable operation, small enough to be held by one hand, can work continuously for 24 hours and high work efficiency.
  • Adjustable eccentric block angle, stepless adjustment of excitation Vibration force meets various working environment requirements..
  • 【Professional Protection】This small vibration motor uses a special oil-resistant and anti-oxidation power cord, plus a vibration-proof outlet protective cover to prevent long-term vibration damage to the cable. Moreover, it is waterproof and dustproof, insulated, with stronger sealing and multiple protections..
  • 【Wide Application】This small vibration motor is widely used in mining, metallurgy, coal, electric power, construction, chemical, medical, foundry, food, powder spraying equipment, powder sieving, food machinery, etc. The main equipme....
Check Stock

Five Oceans FO4203 Marine Boat Adjustable Outboard Motor Bracket, Heavy Duty, AISI316 Stainless-Steel Fine Polished for 2 and 4 Stroke Outboards Up to 130lbs 60kg, White Poly Mounting Board 25HP

  • Heavy-duty structure made of AISI3616 polished stainless steel. Extra-wide 10-1/4 inches x 7-1/2 inches white poly mounting board for the new wider style motor locking clamps. Transom Plate Measures: 4-3/8 inches x 4-7/8 inches.
  • They are designed for 4-stroke engines. Accommodates long or short shaft motors. New, ergonomically designed twist lock safety knobs secure bracket in place.
  • Suitable for motors up to 25HP with a maximum weight of 130 pounds. Designed to resist the harsh conditions of the marine environment. Ideal for Fishing, Pontoon, small power, sailing boats.
  • Built especially for new four strokes, heavier, high torque motors. Allows you to raise and lower trolling and auxiliary engines with ease.
Check Stock