Categories

Best Small Quantity Pcb

Electronics-Salon 4X Solderable Breadboard Proto Board PCB DIY Kit for Raspberry Pi 2/3 Model A B A+ B+ Zero

  • The proto breadboard PCB suitable for any type Raspberry Pi GPIO, or other electronic projects DIY..
  • PCB Material: high quality FR-4 glass fiber PCB. Dimensions: 62mm x 88mm / 2.44" x 3.46", Thickness: 1.6mm / 0.063".
  • Top to bottom layer all solder pad holes are plated through, pads grid (pitch) 2.54mm / 0.1", hole diameter 1.2mm / 0.047"..
  • Package included 4x PCBs, 4x 2x20pin pitch 0.1" male headers, 16x M3x10mm nylon standoffs and 16x M3x6mm nylon screws..
Check Stock

Pieces 4 Pin LED Light Strip Connectors Set Including Screw Fixing Clips, 4 Pin LED Connectors, Cuttable T, L and X Shape PCB Board for SMD 5050 RGB LED Strip Lights Gapless Solderless Connector

  • ...ity in line with + of strip before you connect it.
  • Wide range of usages: the 5050 LED strip connectors are suitable for standard density strips or DIY LED lights, for corner connection, and able to decorate Christmas trees, parties, birthdays, weddings, parties and other scenes according to your own needs.
  • Sufficient quantity: the package comes with 40 pieces 4 pin LED connectors, 15 pieces L-shaped PCB boards, 15 pieces T-shaped PCB boards, 5 pieces X-shaped PCB boards and 20 sets of screw fixing clips, which can meet your different needs in daily life.
Check Stock

60 Pieces Breakaway Pin Header, 40 Pin 2.54mm Straight Single Row Male Pin Header Connector for Arduino Prototype Shield

  • Break Away Headers: Pcb pin head is a straight single row connector, the size of pin pitch is 2.54mm/0.1 inch and there are totally 40 number of pins on each..
  • Easy to Cut: Our male pin header connectors can be cut to different lengths according to your needs, easy to break off and solder on..
  • Electric Component: The pcb pin strip plays the function of bridge in the circuit, and takes up the task of current or signal transmission. It is one of the indispensable components of PCB board and circuit board..
  • Wide Application: Straight single row male pin header is widely applied in the computer and breadboard, suit for Arduino, Raspberry pi and other electronic projects..
  • What You Get: Comes with 60pcs male header connecter strips, sufficient quantity to meet your different needs..
Check Stock

Glarks 40pcs(8 Kinds) 2.54/3.8/5.0/7.5mm Pitch 2/3 Pin PCB Mount Screw Terminal Block Connector Assortment Kit

  • Packaging Quantity: 40pcs (8 kinds each 5 pcs).
  • Pitch: 2.54mm / 3.8mm / 5.08mm / 7.5mm, 2 / 3 Pin.
  • Rated Value: 150V / 250V / 300V, 6 / 8 / 10A.
  • Applied to PCB wiring, easy to welding, stable and reliable, spiral wire is not easy to take off the line.
Check Stock

Gardner Bender GSW-26 Electrical Door Switch, SPST, Normally On- Mom OFF, 16 A/125V AC, (Repl. for GSW-SK)

  • Tealio switches come in 1 variant. The spring weight is rated at "bottom out" force, not actuation! Our Tealio switches have been tweaked with wobble reduction and improved smoothness compared to regular Gateron linears..
  • 67g - Transparent, Light Teal-Blue Stem, PCB Mount [Linear].
  • Please note that PCB mounted switches can still be used in many plate mounted keyboards. As long as your PCB underneath has 2 extra holes next to the center post, it will support PCB Mounted switches and add extra rigidity to your build. If your PCB does not have the extra holes, then you can simply cut the small plastic legs off to make them Plate-Mount!.
Check Stock

BAICUNTOU 57-piece hand drill set, 1 needle vise hand drill, 46 micro-twist drill bits and 10 PCB mini drill bits,jewelry drill bits,used for resin polymer clay, craft carving, DIY, jewelry

  • ... .5 .6 .7 .8 .9 .0mm), (10 pcs PCB mini drills, 1 piece per size -0.1/0.2/0.3/0.4/0.5/0.6/0.7/0.8/0.9/1.0) a total of 57 pieces for your craft carving DIY work.
  • [Needle vise hand drill]: It is made of aluminum alloy, which is sturdy and durable. It adopts 3-jaw chuck and 0.3-3.4mm adjustable chuck to ensure that the small drill will not fall off. The tail can be rotated, sturdy and durable, and easy to operate..
  • [PCB micro drill bit]: PCB micro drill bit is made of tungsten carbide, with a handle diameter of about 3.175 mm and a total length of about 38 mm. It is suitable for processing PCB, ordinary FR-4, CEM-3 boards, SMT, CNC, molds, plastics, etc. Circuit board, carbon fiber, composite board, etc..
  • [Wide application]: Micro drills are light weight, small in size, and do not take up space. They can be used to process wood, plastic, rubber, PVC, walnut, models, bones, horns, amber, olives, fiberglass and other materials..
  • [Portable and easy to store]: The pin vise set includes a clear small storage box, which is convenient for you to organize small parts when not in use. If you need to go out and carry, just put the things you need in the small storage box In the box, the transparent color will help you to check if the product is in it..
Check Stock

Jienk 5Pcs 4-Pin 300V 8A KF2EDGK 3.5mm Pitch Screw Terminal Block Connector for 28-16AWG

  • 【Terminal Pitch】3.5mm/ 0.14inch pitch PCB terminal block connector..
  • 【Easy to Use】No soldering required. Just use a small screwdriver to open up the terminal blocks, slide in your stranded or solid-core wire, and re-tighten. Save you from solder trouble, no need to purchase expensive tool. Great time and money saver..
  • 【Application】: PCB terminal is widely used in electronic equipment, such as small electronic watches, calculates, general computer, communication electronics equipment automatic control system, domestic appliance and warning devices, etc..
  • 【Package Includes】: 5 x PCB Terminal Blocks..
Check Stock

10 Pieces No Clean Soldering Flux Pen and Solder Remover Wick, 0.1 Inch Wide and 59 Inch Long, Solder Braid Wick Liquid Solder Flux Pen for Electronics Welding Repair Tabbing Wire Maintenance

  • Nice combination: you will get 5 no clean soldering flux pens and 5 solder remover wick sets, 10 in total, sufficient quantity, thoughtful combination, to meet daily use and replacement needs.
  • Appropriate size: the no-clean solder wick is about 1.5 m/ 59 inches long and 2.5 mm/ 0.1 inches wide, and liquid flux brush flux pen is about 15 x 1.5 cm/ 6 x 0.6 inch, convenient to hold.
  • Please check the size carefully before purchasing.
  • Multiple reliable materials: these no-clean braided soldering wicks are made of quality copper wire, using nice weaving technology, which can enhance surface tension and absorb excess solder.
  • And flux remover pen adopts quality material, non-leakage, flux safe and prevents you from being exposed to organic solvents.
  • Practical tools: soft brush tip flux pen releases a moderate stream of liquid to clean components without spoiling the PCB copper foil or IC pins.
  • Solder remover has good thermal conductivity and absorption, helping to reduce the risk of thermal spoiling to the board.
  • Broad utilization: these flux pens and braided solder wicks can be applied in laboratories, computers, home repairs and to correct small PCB errors and through-hole joints, electronic soldering and much more, bringing a lot of convenience and effic....
Check Stock

QCQIANG JQX-13F 8 Pin-10A AC 110V Electromagnetic Power Relay with Female Spade Electric Wire Connector(3pcs)

  • JQC-3F general purpose 5 pins SPST power relay PCB type mini power coil relay.
  • Contact : 7A 250VAC, 12A 120VAC/10A 125VAC, 10A 28VDC.
  • Coil 5 pins mini SPST power relay pin quantity : 5 Pin.
  • material : plastic, metal, electronic component.
  • Power relay size (Approx.) : 1.8 x 1.4 x 1.9cm / 0.7"""" x 0.6"""" x 0.7""""(L*W*T),widely used in the remote control, communication, automatic control system, electronic equipments, etc..
  • Power relay PCB type compact and sealed construction. Long operational life. The relay can automatically adjust, protect and transform the circuit.
Check Stock

No Clean Soldering Flux Pen and Solder Remover Wick, 0.1 Inch Wide and 59 Inch Long, Solder Braid Wick Liquid Solder Flux Pen for Electronics Welding Repair Tabbing Wire Maintenance (6 Pieces)

  • Package includes: you will receive 3 pieces of no clean solder flux pens, and 3 pieces of soldering braided wick, in total of 6 pieces, sufficient quantity and a considerate combination to meet your needs for daily use and replacement.
  • Suitable size: the rosin flux pen measures about 14.3 cm/ 5.6 inches in length, and the solder braided wick is about 1.5 m/ 59 inches long and 2.5 mm/ 0.1 inches wide, which is convenient to hold in hand.
  • Please check the size carefully before purchasing.
  • Quality material: these no-clean soldering wicks are made of quality copper wire and adopt precise weaving technology, which can enhance tension on the surface to absorb excess solder.
  • The liquid solder pen is made of reliable materials, no leaking and safe for protecting the flux, preventing you from touching the organic solvents.
  • Practical tools: 10-ml solder flux pen with soft brush tip can release the liquid flow moderately, which can clean the components without harming the PCB board copper foil or IC pin.
  • The solder remover wick features good thermal conductivity and absorption, useful to reduce the risk of thermal injury to the circuit boards.
  • Wide applications: these flux pens and braided solder wicks can be applied for laboratory, computer, home repairs and ....
Check Stock

PCB Drill Bits Set, Micro Drill Bits Set, 50pcs PCB Drill Bit Set Spiral Flute Carbide 0.3mm-1.2mm Drill Bits for Dremel Print Circuit Board Jewelry CNC Engraving (5PCS Each) by BOOTOP

  • 180 Days warranty. If you are not satisfied with our products,feel free to contact us for a replacement or refund. The PCB Drill Bits may also know as micro drill bits,NCN drill bits,micro drill bits set,plexiglass drill bit set,circuit board drill bits,pcb drill set,drill bits for dremel tool,small diameter drill bits, PCB drill bit set..
Check Stock

VEVOR Preheating Oven T8280 1600W Infrared Preheating Station Hot Plate PCB Preheater 280x270MM

  • Preheating Station Work Bench Size :410x316mm.
  • Complete Preheating Oven Machine Power :1600W.
  • PCB Preheater Heating plate temperature can be adjusted: 0-450 degree.
  • Preheating Oven T-8280 Can Achieve To Heat PCB Board And Component Which Contains Lead Or Not，Especially For The BGA And SMD Parts.
  • Preheating Station Use Infrared Heat, Easy To Cut Through, Heat Proportion, Don’T Have Sirocco Flow. Don’T Shift The Small Components On The PCB Board，Ensure The Welding Quality.
Check Stock

10K Ohm Trim Potentiometer Breadboard Trim Potentiometer Kit with Knob Variable Resistors Trimmer Potentiometer Assortment Kit Compatible with Arduino, Blue (12 Pieces) (12 Pieces)

  • Package content: you will receive 12 pieces of trim potentiometers with knobs in blue color, suitable for breadboarding and prototyping.
  • Such a sufficient quantity can easily meet your daily usage and replacement demand.
  • Reliable to use: composed of quality material, these breadboard trim potentiometers are safe and sturdy, reliable and stable, will not easily break or deform, which can be applied for long-term use.
  • Reasonable design: with round pins rather than flat blade pins of other trimpots, these linear potentiometers are suitable for both breadboarding and PCB.
  • The knurled knob with arrow design allows you to easily adjust by hand or small flat blade screwdriver.
  • Specification: these trim potentiometers adopt linear resistance change mode, the rotation angle is 270 degrees, and adjustable range is 0-10K ohm, which are easy to connect and can work well.
  • Dimension information: each rotary potentiometer measure approx. 0.375 x 0.375 x 0.19 inch/ 9.5 x 9.5 x 4.9 mm, such a small size only requires little space, which makes them easy for you to store.
Check Stock