Categories

Best Small U Bending Machine

VEVOR Hydraulic Rebar Bender, 3000W, Electric Rebar Bender, 1-1/4'' / 32 mm #10 Grade 60 Max Rebar Diameter, Rebar Steel Bender Machine, Bending Machine For Bending Rebar, Steel Bar, Steel

  • 6-7S Ultra-Fast Bending Speed: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1-1/4" #10 Grade 60(6 to 32 mm) within 6 to 7 seconds. Bending Angle: 0-180°,Bending Radius: 1.97'' / 50 mm, Max. Rebar Hardness: HRC30..
  • 3000W Pure Copper Coil Motor: This portable rebar bender features a 3000W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 26A, Noise: 105 dB(A)..
  • Angle Adjustment Knobs: This rebar bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When operating under point 2, fix angle of point 2 same as or no larger than point 1 of 5 degree, to ensure that under the condition when exterior shock attacks the machine itself will not move to left and right to operate the machine..
  • Sturdy Machine Body: The electric bender machine adopts a sturdy iron machine body and durable Idler Wheel. φ78 / 109 Fixed Idler Wheel ....
Check Stock

VEVOR Hydraulic Rebar Bender, 3000 Wattage Electric Rebar Bender, 1-1/4'' / 32 mm #10 Grade 60 Max Rebar Diameter, Rebar Steel Bender Machine, Bending Machine for Bending Rebar, Steel Bar, Steel Rod

  • 6-7S Ultra-Fast Bending Speed: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1-1/4" #10 Grade 60(6 to 32 mm) within 6 to 7 seconds. Bending Angle: 0-180°,Bending Radius: 1.97'' / 50 mm, Max. Rebar Hardness: HRC30..
  • 3000W Pure Copper Coil Motor: This portable rebar bender features a 3000W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 26A, Noise: 105 dB(A)..
  • Angle Adjustment Knobs: This rebar bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When operating under point 2, fix angle of point 2 same as or no larger than point 1 of 5 degree, to ensure that under the condition when exterior shock attacks the machine itself will not move to left and right to operate the machine..
  • Sturdy Machine Body: The electric bender machine adopts a sturdy iron machine body and durable Idler Wheel. φ78 / 109 Fixed Idler Wheel ....
Check Stock

VEVOR Hydraulic Rebar Bender, 1700W, Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

VEVOR Hydraulic Rebar Bender 1700 Wattage Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

LNKA Sewing Machine Parts Upper Looper (Right)#410434,Lower Looper (Left) #410452 for Singer 14SH644,14SH654 Finishing Touch,14U12,14U12A and 14USeries

  • Sewing Machine Parts Upper Looper (Right)#410434,Lower Looper (Left) #410452 For Singer 14SH644,14SH654 Finishing Touch,14U12,14U12A AND 14USeries.
  • Fit Singer sewing machine 14SH644, 14SH654 Finishing Touch, 14U12, 14U12A, 14U234, 14U234B, 14U244, 14U244B, 14U286, 14U286B, 14U32, 14U32A, 14U34(14U34B), 14U344, 14U344B, 14U34A, 14U354, 14U354B, 14U44, 14U44B, 14U444, 14U444B, 14U454, 14U454B, 14U46, 14U46B, 14U52, 14U52A, 14U64, 14U64A, 14U64C, 14U65, PRO4D.
  • Fit Babylock sewing machine BL300, BL5030.
Check Stock

Clscea Aquarium Glass CO2 Diffuser Atomizer with U Tube Check Valve Suction Cup Premium Version

  • Ideal for small tanks. Suitable for pressurized CO2 supplying systems..
  • High-quality glass material ensures transparency and durability..
  • Premium ceramic piece produces fine and even bubbles. Ceramic pieces are non-removable and non-replaceable..
  • Includes U-shaped bend to avoid clogging due to bending of CO2 tubing..
  • This diffuser requires at least 14PSI working pressure for optimal operation. Fits 4/6mm (3/16" Inner Diameter) CO2 tubing..
Check Stock

Spoon Ring Bender, Ring Bending Tool, Spoon Ring Making Machine Tool Kit for Jewelry Spoon Rings Press DIY

  • QUALITY - Our ring bending tool is made of quality steel, and the white ones in this ring making kit are nylon dies, used for softer materials that might scratch or dent..
  • DESIGN - The ring maker machine includes 9 sizes of bending posts of metal, and reusable negative bend pieces of metal and nylon for each post size. This is a multi-functional ring making tool, it works simple and easy to change the dies..
  • DURABLE - Our ring bending machine is sturdy and durable, works for bending silverware and making rings and jewelry, the thickness of the flatware will be the only limiting factor..
  • SIMPLE - It's simple to set the spoon ring maker machine up, and it's fun and easy to make spoon rings with our ring bender machine, for both beginners and practitioners..
  • SERVICE - If you have any questions about our ring bending kit, please feel free to contact us for solutions..
Check Stock

Yagote CO2 Diffuser, Nano CO2 Diffuser Glass Reactor for Aquarium Planted Tank (CO2 Diffuser)

  • Ideal for small tanks. Suitable for pressurized CO2 supplying systems..
  • High-quality glass material ensures transparency and durability..
  • Premium ceramic piece produces fine and even bubbles. Ceramic pieces are non-removable and non-replaceable..
  • Includes U-shaped bend to avoid clogging due to bending of CO2 tubing..
  • This diffuser requires at least 14PSI working pressure for optimal operation. Fits 4/6mm (3/16″ Inner Diameter) CO2 tubing..
Check Stock

QWORK Cable Drag Chain Wire Carrier High Toughness Closed Plastic Chain 15mm x 50mm

  • High quality: Using reinforced plastics, excellent toughness, high elasticity, wear resistance, flame resistance. It has stable performance at high and low temperatures and can be used outdoors..
  • Unique features: abrasion resistance, strong resistance, oil and salt resistance, and certain acid and alkali resistance..
  • Type: Semi Enclosed Type (Inner side openable).
  • Adjustable: You can link wires to each other to your desired length. When the mobile terminal is bent into a "U" shape, the longest part will be flat..
  • Widely used: Used in CNC machine tools, glass machinery, electronic equipment,, robots, automated warehouses and so on..
Check Stock

PowerSmart 20V Cordless Leaf Blower with 2.0Ah Battery and Charger, Lightweight Small Leaf Blower for Gutter, Patio, Jobsite

  • Powerful in Small Size: small leaf blower with turbo tech, deliver 117 MPH speed, 120 CFM air flow for blowing leaves, lawn debris, dust and fluffy snow..
  • Lightweight & Portable: 3.6 lbs with compact design, easily operated by one hand. Upgraded double-length tube, easy reach corner, more convenient to blowing without bending down.
  • 2.0Ah Battery & Fast Charger: come with 20V 2.0Ah battery and 1h fast charger, 15-min running time on max power. Compatible with PowerSmart 4.0Ah/6.0Ah 20V batteries for longer running time..
  • CUSTOMER SATISFACTION: covered with PowerSmart 2-year-warranty, free lifetime tech support, repair service center in U.S., online support in 24H. Feel free to contact with us for any reason..
Check Stock

Extension Tray Compatible with Silhouette Cameo 4,Extender Tray Compatible with Silhouette Cameo 4 Cutting Mat,Cutting Mat Extender Support for Cameo 4 (White)

  • If your machine is stacked or on a small table that does not allow the mat to rest while cutting it can cause your craft to unstick due to the mat bending downward,This support lets your mat straighten out and eases the pressure while cutting.
  • This Mat Extender Support Perfect prevent the mats from bending downwards while in use.
  • Clip them together when you are ready to use them,When completed crafting for the day unclip them and pack them neatly into your bag.
  • This Extension Tray is super easy to install and remove your silhouette Cameo 4 machine.
  • Our products are made of high-quality ABS Material, not as easy to crack as 3d printed products.
Check Stock

Happybuy Electric Hydraulic Rebar Cutter, 900W Portable Electric Rebar Cut 5/8' 16mm #5 Rebar within 3 Seconds, 110V

  • 0 - 90 Degrees Excellent Performance: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' to 1" (6 to 25 mm) within 5 seconds. 1/4'' / 6 mm #2 Rebar(0-55°), 1'' / 25 mm #8 Rebar(0-90°). It is able to satisfy your various bending demands..
  • 1500W Pure Copper Coil Motor: This portable rebar bender features a 1500W pure copper coil motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bending machine's operating life to a large extent..
  • Sturdy Machine Body & Head: The electric bender machine adopts the sturdy machine body and high-intensity hook, which are stronger and not easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing..
  • Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the steel, and the piston will return to its origi....
Check Stock

uxcell R28 15mm x 30mm Black Plastic Wire Carrier Cable Drag Chain 1M Length for CNC

  • External Size: 20x38mm(0.787x1.496 inch).
  • Change Size: You could link the cables with each other to form one long length you need..
  • Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock