Categories

Best Smd Type Crystal Tcxo

Surecom SF401 Plus 27Mhz-3000Mhz Radio Portable Frequency Counter Meter with CTCCSS DCS Decoder

  • The frequency meter capable of measuring the parameters of the frequency of the continuous carrier signal walkie-talkies , with signal strength indicator..
  • This portable frequency counter is designed for counting continuous wave signal comes from Two-way Radio..
  • There are easy ranges for you to choose. The ranges cover most of the frequency of the two way radios you want to measure..
  • Its four-button control is easy to use and its small size allows you to carry it anywhere you like..
  • Work by TCXO(Temperature Compensate X'tal (crystal) Oscillator) ,In the range of -45 C ~ 65 C can reach ± 2 ~ ± 4ppm accuracy..
Check Stock

Geekstory USB GPS Module Antenna Supports GPS+GLONASS Beidou Built-in Flash for Arduino Pixhawk IPEX Compatible, Better Than VK-162

  • GLONASS+ BeiDou multiple modes Built-in LNA signal amplifier.
  • Built-in Flash, free configuration product baud rate, output statement, output rate, second pulse and other parameters.
  • Built-in TCXO Crystal and Farad Capacitors for Faster Hot Start.
  • The product documentation link cannot be displayed. If you need technical documentation, please click “Geekstory”(you can find "Sold by Geekstory" under Buy Now button), in the new page, click “Ask a question” to email us.
Check Stock

Full Band Receiver RTL - SDR Radio Communication System 0.1MHz - 1.7GHz Radio Accessory for XP/Win10/Android

  • Meanwhile, such receiver support for XP / Win7 / Win8 / Win10 / and other systems..
  • Receive electromagnetic waveth in the range of 0.1MHz‑1.7GHz and support AM, FM (NFM, WFM), CW, DSB, LSB, USB demodulation..
  • This receiver has a built‑in 1 ppm temperature compensation crystal TCXO, which makes the frequency more stable and accurate..
  • Full band tuner increases the internal chip heat dissipation to make the work more stable..
  • Used to receive and listen to short‑waveth single‑sideband communication, FM radio, intercom talk, aviation band, meteor monitoring ADS‑B decoding radar, signal reception, etc..
Check Stock

DAOKI 5Pcs RTC I2C Module Arduino I2C RTC DS1307 AT24C32 Real Time Clock Module 24C32 Memory High Precision for AVR ARM PIC SMD Compatible with Arduino with 60 Pin

  • Clock chip: high-precision clock chip DS3231SN.
  • is a low-cost, extremely accurate I2C real-time clock (RTC), with an integrated temperature-compensated crystal oscillator (TCXO) and crystal..
  • The device incorporates a battery input, disconnect the main power supply and maintains accurate timekeeping..
  • Integrated oscillator improve long-term accuracy of the device and reduces the number of components of the production line..
  • The DS3231 is available in commercial and industrial temperature ranges, using a 16-pin 300mil SO package..
Check Stock

Fafeicy Full Band Receiver, Radio Communication System 0.1MHz1.7GHz Used to Receive and Listen to Short‑waveth Single‑sideband Communication

  • This receiver has a builtin 1 ppm temperature compensation crystal TCXO, which makes the frequency more stable and accurate..
  • Full band tuner increases the internal chip heat dissipation to make the work more stable. A great choice for you..
  • APPLICATION: Such receiver support for XP / Win7 / Win8 / Win10 / An-droid and other systems..
  • Used to receive and listen to shortwaveth singlesideband communication, FM radio, intercom talk, aviation band, meteor monitoring ADSB decoding radar, AIS signal reception, etc..
  • Receive electromagnetic waveth in the range of 0.1MHz1.7GHz and support AM, FM (NFM, WFM), CW, DSB, LSB, USB demodulation..
Check Stock

RTL-SDR Blog R820T2 RTL2832U 1PPM TCXO SMA Software Defined Radio (Dongle Only)

  • Includes 1x RTL-SDR Blog brand R820T2 RTL2832U 1PPM TCXO HF Bias Tee SMA Dongle (V3) (Dongle Only).
  • Several improvements over other brands including use of the R820T2 tuner, improved component tolerances, a 1 PPM temperature compensated oscillator (TCXO), SMA F connector, aluminium shielded case with thermal pad for passive cooling, activatable bias tee circuit and a much improved antenna set..
  • Can tune from 500 kHz to 1.7 GHz and has up to 3.2 MHz of instantaneous bandwidth (2.4 MHz stable). (HF reception below 24 MHz in direct sampling mode with reduced performance). Please note RTL-SDR dongles are RX only..
Check Stock

MMDVM Hotspot Board + Aluminium Case Support UHF VHF Support P25 DMR YSF DSTAR NXDN POCSAG for Raspberry Pi-Zero W, Pi 3 (Raspberry Pi NOT Included)

  • Save electricity, High quality TCXO, stable, low BER. Note: This is NOT a completed or assembled Hotspot, it is just MMDVM Board with Aluminum case..
  • Support Raspberry Pi 3B, Pi ZERO, compatible with NanoPi NEO, Orange Pi, compatible with BlueDV (requires USBtoTTL or Bluetooth model).
  • Support VHF/UHF, frequency range: 144MHz-148MHz, 420MHz-475MHz, 842MHz-950MHz (depending on ADF7021 and TCXO, HAT firmware amateur radio brand license restrictions).
  • Support MMDVM mode DMR / YSF / P25 / NXDN / DSTAR / POCSAG.
  • Support online upgrade, User-friendly OLED and Nextion special design location, reserved for additional installation of Bluetooth modules.
Check Stock

Nooelec HackRF Complete Bundle - Genuine HackRF One Software Defined Radio SDR with 0.5PPM TCXO in a Custom Black Aluminum Enclosure ANT500 Antenna & SMA Antenna Adapter Bundle Included

  • Your bundle includes a genuine HackRF One installed an inconspicuous black aluminum enclosure with a 0.5PPM TCXO module, an ANT500 antenna, 4 SMA....
  • HackRF One is capable of half-duplex operation in the range of 1MHz to 6000MHz. The TCXO module ensures impeccable tuning accuracy in nearly any....
  • HackRF One is an open-hardware device which is compatible with a wide range of SDR software applications, most of which are free to download and open....
  • The included adapters will allow you to connect a wide range of antennas to your HackRF One, including F-connector, N-connector, BNC and PAL antennas.
  • Installation support and assistance available directly from Nooelec. Full 2 year warranty!.
Check Stock

AKKON - For 2012 2013 2014 2015 BMW F30 3-Series Sedan [FULL LED] Halogen-Type Projector Black Smoked Headlight Pair Replacement

  • ***Compatible with Factory Halogen Type Headlights Model***.
  • ***Compatible with Sedan 4Door Models***.
  • *** Not Compatible with Factory HID/Xenon Headlights Model***.
  • ***Not Compatible with 2Door Coupe | Convertible Model***.
  • Comes in a Pair Including Left Side (Driver Side) & Right Side (Passenger Side).
  • New Trend Projector Headlight Design, Provide Better Light Pattern Than Traditional Crystal Headlights LED Halos are made with the best materials and precisely illuminate with Ultra-Bright SMD LED chips.
  • No Installation Guide or Instruction Included Professional Installation is Highly Recommended.
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) Approved.
  • Wiring Modification Might Be Needed On Halo And LED Connection, Please Check With Local Professional Mechanic.
Check Stock

AKKON - For 2012 2013 2014 2015 BMW F30 3-Series Sedan [FULL LED] Halogen-Type Projector Black Headlights Pair Replacement LH+RH

  • ***Compatible with Factory Halogen Type Headlights Model***.
  • ***Compatible with Sedan 4Door Models***.
  • *** Not Compatible with Factory HID/Xenon Headlights Model***.
  • ***Not Compatible with 2Door Coupe | Convertible Model***.
  • Comes in a Pair Including Left Side (Driver Side) & Right Side (Passenger Side).
  • New Trend Projector Headlight Design, Provide Better Light Pattern Than Traditional Crystal Headlights LED Halos are made with the best materials and precisely illuminate with Ultra-Bright SMD LED chips.
  • No Installation Guide or Instruction Included Professional Installation is Highly Recommended.
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) Approved.
  • Wiring Modification Might Be Needed On Halo And LED Connection, Please Check With Local Professional Mechanic.
Check Stock

XUNATA LED Strip Super Bright DC12V SMD5630 (5630 Upgraded) 600LEDs Non-Waterproof LED Tape Lights Cool White 7000K 5Meter/ 16.4Feet Using for Home, Kitchen Cabinet Lights and Ceiling Lights

  • New LED Type: During the past of half year, a new LED SMD was born--SMD 5630. Its size is 5.7*3mm,so it is bigger than SMD 5050 or SMD 2825. So that, luminosity of these 5630 LED strip light is more brighter,lifespan is more longer, heat dissipation is more better. SMD 5630 LED Strip Light will be one of the main lights in near future.
  • WIDELY USE:The strip has excellent heat dissipation, making it much more durable. It very suitable for home, indoor, outdoor, garden,living room, kitchen, under cabinet, dining room, bedroom, party, stairway, wedding, Christmas, etc.
  • SUPER BRIGHT AND SAFE TO USE: This 16.4ft strip light includes 600 SMD 5630 bright LEDs. And the working voltage is 12V, extremely Low Heat. It is touchable and safe to children.
  • EASY INSTALLATION: Self-adhesive back with adhesive tape for safe and easy application. Slim, compact and flexible PCB strip. Mount end-to-end for bendable or angled patterns, or in continuous rows. A power adapter and connector is required but not included, please search ASIN: "B07DWN8HLZ" and if you need.
  • Cuttable and linkable. Easy to cut and use with Lighting accessory. It can be cut every 3 LEDs along the cutting marks, without damaging the rest strips.
Check Stock

RTL-SDR Blog V3 R820T2 RTL2832U 1PPM TCXO HF Bias Tee SMA Software Defined Radio with Dipole Antenna Kit

  • Includes 1x RTL-SDR Blog V3 R820T2 RTL2832U 1PPM TCXO HF Bias Tee SMA Dongle and 1x Multipurpose Dipole Antenna Kit.
  • Great for many applications including general radio, air traffic control, public safety radio, ADSB, ACARS, trunked radio, P25 digital voice, POCSAG, weather balloons, APRS, NOAA APT weather satellites, radio astronomy, meteor scatter monitoring, DAB, classroom learning, or for use as a low cost panadapter with a traditional ham radio..
  • Several improvements over other brands including use of the R820T2 tuner, improved component tolerances, a 1 PPM temperature compensated oscillator (TCXO), SMA F connector, aluminium shielded case with thermal pad for passive cooling, activatable bias tee circuit and a much improved antenna set..
  • Can tune from 500 kHz to 1.7 GHz and has up to 3.2 MHz of instantaneous bandwidth (2.4 MHz stable). (HF reception below 24 MHz in direct sampling mode with reduced performance). Please note RTL-SDR dongles are RX only..
  • Comes with our portable dipole antenna kit. Great for beginners as it allows for terrestrial and satellite reception. Easy to mount outdoors and designed for portable and temporary outside usage. Please do not use outside during poor weather conditions..
Check Stock

AURSINC MMDVM Hotspot Board + Antenna Support UHF VHF Support P25 DMR YSF DSTAR NXDN POCSAG for Raspberry Pi-Zero W, Pi 3 (OLED Board)

  • MMDVM hotspot supports UHF VHF, frequency range: 144MHz-148MHz, 420MHz-475MHz, 842MHz-950MHz (depending on ADF7021 and TCXO, HAT firmware amateur radio brand license restrictions).
  • AURSINC hotspot board supports Raspberry Pi 3B, 3B +, Pi ZERO, compatible with NanoPi NEO, Orange Pi, compatible with BlueDV (requires USBtoTTL or Bluetooth model).
  • Hotspot board saves electricity, High quality TCXO, stable, low BER. Support MMDVM mode DMR / YSF / P25 / NXDN / DSTAR / POCSAG. Support online upgrade, User-friendly OLED and Nextion special design location, reserved for additional installation of Bluetooth modules.
  • If the Raspberry fails to connect the hotspot board, please try update the firmware of the hotspot board by conducting the command: sudo pistar-mmdvmhshatflash hs_hat-12mhz.
  • Compatible with P4 settings:since our mmdvm board is defautly setup for Pi-Zero W, Pi 3. and if you do want to connect it with your Pi 4, you could try below methods. PICK ONE. Method 1: Remove the R1 resistance of the hotspot board(single/dual).
  • Method 2: Cut off the 2 Raspberry Pi pin headers on the corners of the board ( pick one to operate on your MMDVM board, refer to the product image for the R1 and 2 pin headers locations).
Check Stock