Best Smd Type Thermistor

LG EBG60663207 Genuine OEM PTC Thermistor Assembly for LG Refrigerators

• This LG PTC Thermistor Assembly is a genuine OEM (Original Equipment Manufacturer) part manufactured to exact specifications.
• Replacement LG brand Refrigerator PTC Thermistor Assembly or Positive Temperature Coefficient Thermistor starts the compressor motor.
• LG EBG60663207 Refrigerator PTC Thermistor Assembly Is also called the Compressor Overload and Start Relay.
• High quality LG OEM EBG60663207 Refrigerator PTC Thermistor Assembly is manufactured with premium materials for durability and exact fit, be sure to....
• Life's Good when choosing Genuine LG OEM Factory parts for your LG appliances.

Ametherm SL22 1R020 (Pack of 2) NTC THERMISTOR,ICL 1 OHM 20% 20A 22MM, (Also SG100, SG301)

• Pack With: Package of 10pcs 1% accuracy 10K thermistor, 60mm / 2.4in line length..
• High Sensitivity: The thermistor is high sensitivity and wide operating temperature range, which is easy to use..
• Wide Use: Thermistor can be used as electronic circuit component for instrument line temperature compensation and temperature difference cold junction temperature compensation..
• Small Size: The NTC thermistor is able to measure the gap temperature that other thermometers can't measure..
• Good Stability: The thermistor has good stability and strong overload capability, easy to process into complex shapes..

Upgrade M3 Hex Screw in Fixing Thermistor 100K 3950 Temperature Sensor for Ender 3 V2 Pro CR10 and Other 3D Printer Extruder Hotend 100K 3950

• M3 screw for installation is Quik and Durable, Flexible and Long Lasting, longer life span.
• DIY players can also modify BLOCK by themselves. Make an M3 threaded hole in BLCOK, then you can use this thermistor.
• Thermistor model: NTC 100K 3950. HERE is the firmware setting: *13:100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " &"Hotend "All In ONE"....
• For the printer which uses NTC 100K 3950 thermistor, Then this thermistor is plug and use.

Thermistor for Dometic 3851210025 Refrigerator,RV Refrigerator Sensor Replacement for Dometic Refrigerator RM Series W 2 Wire Thermistor RM1350 2351 2354 2410 2620 2652 2852 2862 3807

• Replacement for Dometic refrigerators 3851210025 thermistor. Replaces Part Numbers: 2931863035 2931863076 3851059042.
• The thermistor for dometic rv refrigerator adopts environmental protection epoxy resin coating and double-layer sealing, with better insulation....
• Fix for Dometic refrigerator temperature is over cold freezing or hot spoiling.Just try to replacing our dometic 3851210025 refrigerator thermistor....
• Compatible with almost all Dometic refrigerators models starting RM with two wire thermistor:RM1350 RM2351 RM2354 RM2410 RM2451 RM2454 RM2551 RM2554....
• The model name of thermistor may be different,details pls see below product numbers.3-year warranty .If you have any question pls feel free to contact....

Traceable Scientific Thermistor Thermometer with Calibration; USB Probe

3PCS HT-NTC100K Thermistor Sensor for Creality Ender 3 v2 Upgrade 3x15mm 3950 Compatible with E 3D V6 Volcano PT100 Ender-3-5 Pro CR10 3D Printer

• 【Ender 3 Thermistor, Upgrade HT-NTC100K Thermistor】Cartridge temperature sensor. Metal head diameter: 3mm, head length: 15mm,cable wire length: 1 meter,connector: XH2.54 2PIN, （Suitable for heating blocks with holes of 3mm*15mm-3mm*20mm）.
• 【Widly Compatibility】Product recommended operating temperature -50 °C ~ +280 °C, can replace the cartridge K-type thermocouple temperature sensor. Suitable to print multi kinds of filament.Compatible with the heatblocks with 3mm hole,such as: V6 Volcano PT100 type heated block,CR10 plated copper high temperature heating block,etc.
• 【High Stability and Accuracy 】Encapsulated in copper case,copper material has better thermal conductivity than stainless steel and improves accuracy.Secured with high temperature adhesive,high stability, no falling off.The internal temperature package to ensure the maximum service life with precision temperature measurement..
• 【Long Service Life】Compared with other products of the same type that are insulated with ordinary heat shrinkable tubes, this product uses glass fiber with a temperature resistance of 400C degrees for insulation to avoid the possibility of thermal short circuit during high temperature work. Thereby increasing the service life..

Anet 5pcs Thermistor NTC 3950 100K ohm Thermistor for RepRap 3D Printer Heatbed or Hot End 3D Printer Kit Accessories - White 5PCS

• Anet ​3d printer 100k thermistor 1.2m can be used on both of the heated bed and the extruder for 3d printers.
• The thermisor is compatible with most 3D printers in the market such as ender3, ender3 pro, ender3 V2, CR-10, hictop d3 hero eAnet 3d printer tc.
• There is a 2 pin female connector on the thermistor for 3D printer.
• Wire length for the thermistor: 1m/47 inches..
• Recommended parameters for the thermistor: R25℃=100K.

HICTOP 100K ohm NTC 3950 Thermistors/Temp Sensor for Reprap Creality Ender 3 Ender 3 Pro CR-10 10S 3D Printer Pack of 5 1m/39.4inches

• HICTOP 3d printer thermistor can be used on both of the heated bed and the extruder for 3d printers.
• The thermisor is compatible with most 3D printers in the market such as ender3, ender3 pro, ender3 V2, CR-10, hictop d3 hero etc.
• There is a 2 pin female connector on the thermistor for 3D printer.
• Wire length for the thermistor: 1m/39.4 inches.
• Recommended parameters for the thermistor: R25℃=100K B25/50=3950K± 1%.

5-PCS Ender 3 Thermistor HT-NTC100K 3D Printer ntc 3950 100K Thermistor Sensor for Creality Ender 3 v2 Thermistor Upgrade Compatible with E3D V6 Volcano PT100 Ender-3-5 Pro CR10 hotend,

• （Ender 3 Thermistor, Upgrade HT-NTC100K Thermistor (1 meter each)）：Cartridge temperature sensor. Metal head diameter: 3mm, head length: 15mm,cable wire length: 1 meter,connector: XH2.54 2PIN, （Suitable for heating blocks with holes of 3mm*15mm-3mm*20mm）.
• Compatibility：Product recommended operating temperature -50 °C ~ +280 °C, can replace the cartridge K-type thermocouple temperature sensor. Suitable to print multi kinds of filament.Compatible with the heatblocks with 3mm hole,such as: V6 Volcano PT100 type heated block,CR10 plated copper high temperature heating block,etc.
• Stability and Accuracy：Encapsulated in copper case,copper material has better thermal conductivity than stainless steel and improves accuracy.Secured with high temperature adhesive,high stability, no falling off.The internal temperature package to ensure the maximum service life with precision temperature measurement..
• Long Service Life：Compared with other products of the same type that are insulated with ordinary heat shrinkable tubes, this product uses glass fiber with a temperature resistance of 400C degrees for insulation to avoid the possibility of thermal short circuit during high temperature work. Thereby increasing the service life..

8577274 Thermistor for Whirlpool Dryers by PartsBroz - Replaces WP8577274, AP6013514, 3390292, 3406294, 3976615, 772546, ER8577274, PS11746740, WP8577274VP

• ✅ PART NUMBER 8577274: The thermistor is a high-quality exact replacement for part numbers WP8577274, AP6013514, 8577274, 3390292, 3406294, 3976615, 772546, ER8577274, PS11746740, and WP8577274VP..
• ✅ FOR WHIRLPOOL DRYERS: Use the part to fix select Whirlpool, KitchenAid, Kenmore/Sears, and Maytag dryers. Check your dryer manual or reach out to us to confirm compatibility with your model..
• ✅ FIXES COMMON PROBLEMS: Dryer on the fritz? Replacing the thermistor, which regulates temperature in your dryer, can fix dryers that don’t produce enough heat, don’t start, or shut off too soon..
• ✅ SIMPLE DIY FIX: Remove a faulty thermistor and install this new one in under 20 minutes. Helpful tools include a 1/4-inch nut driver, a small flathead screwdriver, and a 1/4-inch socket and ratchet..
• ✅ HIGH-QUALITY PART: Designed to last, this thermistor meets or exceeds all original manufacturer specifications for performance and fit..

WINSINN HT-NTC100K Thermistor Sensor Ender 3 v2 Upgrade 3x15 3950 XH2.54 2Pin Compatible with Ender 3 5 Pro CR6 CR10 Series 3D Printer Hotend Pack of 5Pcs

• ✔️Upgrade HT-NTC100K Thermistor: package temperature measurement. Head diameter: 3mm, Head length: 15mm.
• ✔️The temperature measurement: -50 °C ~ +350 °C, can replace the original K-type thermocouple temperature. Fit for printing high-temperature....
• ✔️Adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with precision temperature measurement..
• ✔️HT-NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers' convenience, the wires adopts line....
• ✔️Made by WINSINN. Can be used with the New Sensor Heater Block (Temperature measurement can be up to 350 degrees)..

279973 & 3392519 & 8577274 Dryer Thermal Cut Off Fuse Kit with Thermistor Control and Thermal Fuse Replacement Part fit for Whirlpool & Kenmore Dryers

• ✅Package Includes: 1 x 279973 Thermal Fuse & Thermostat with Instruction Sheet, 1 x 3392519 Thermal Fuse, 1 x 8577274 Thermistor Control..
• ✅279973 Thermal Fuse & Thermostat – Dryer high limit thermal fuse and high limit thermostat kit. Includes instructions..
• ✅3392519 Thermal Fuse – Dryer non resettable thermal fuse, two 3/16″ wire terminals. This fuse is located on the blower housing next to the blower fan. If the dryer overheats, the thermal fuse blows to cut off power to the dryer and/or stop the dryer from running..
• ✅8577274 Thermistor Control – Dryer thermistor temperature sensor..
• ✅Replaces Part Number – Thermal Fuse & Thermostat 279973 3391913 3404151 3404152 3977395 8318314 897710 AP3094323 PS334387 EAP334387. Thermal Fuse 3392519 WP3392519 3388651 694511 80005 ET401 G4AP0500 3392519 PS11741460 AP6008325 2986 EAP11741460. Thermistor Control 8577274 WP8577274 3390292 3406294 3976615 772546 8577274 1181075 AP6013514 PS11746740 EAP11746740. the replacement part is a direct replacement for your dryer..
• ✅Buy with Confidence – Order from KONDUONE, you can return or exchange within 3 months, true worry-free shopping experience. If replacement part ever fails on your Dryer simply con....

LG LW8022IVSM Window Air Conditioner 8000 Cooling BTU, 340 sq. ft. Cooling Area, Works with Google Assistant/Amazon Alexa, Quiet Operation, in White

• Size: Width 19.57" Height 12.5" Depth 24.5" Volts: 115. Amps: 15. Frequency: 60 Hz..
• Plug Type: 5-15P. CEER: 15.5. Programmable Timer: Yes. Cooling Area: 340 sq. ft. Maximum Air Flow: 190 CFM. Wi-Fi: Yes. Smart Appliance: Yes.
• LW8022IVSM 8,000 BTU DUAL Inverter Window Air Conditioner: Cooling: 8,000 BTU, Estimated Cooling Area: 340 sq. ft. LoDecibel Quiet Operation..
• Other Features: Thermostat Control: Thermistor. Air Deflection: 4-Way. Remote Controller: Yes. Auto Restart: Yes. Energy Saver Function :Yes.
• Other Features: Timer: 24Hr, On / Off. Filter Alarm Function: Yes. Fan Speed (Cooling): 4. Fan Only: 3. In Door Fan Type: Turbo. Type Air. Discharge: Top Discharge. Outdoor Vent / Exhaust: No. Chassis Type: Top Down.