Categories

Best Smooth Bore Cylinder Tube

NEW SOUTHWEST SPEED RACING BRAKE & CLUTCH PEDAL ASSEMBLY WITH MASTER CYLINDERS & BALANCE BAR, REVERSE SWING MOUNT, SHORT 5 TO 1 RATIO

  • Brand New Southwest Speed Short Reverse Swing Mount Brake & Clutch Pedal Combo Kit With 3 Aluminum Master Cylinders (SWS Part # 301-2663). This combo is very similar to the Wilwood Part # 340-4828X3, only about $50 cheaper..
  • Southwest Speed High Volume Aluminum Master Cylinders | * High pressure die-cast from high-grade aluminum, fully machined and assembled with extreme precision * Features the highest fluid capacity of any integral reservoir design * With a total capacity of 8.2 ounces, there is at least 26% more fluid than most competitive brands * More fluid volume means cooler temperatures and additional insurance for extreme conditions where high pad wear can compromise fluid levels during long runs.
  • Kit includes: | * 1 - Reverse swing mount dual pedal, short design, 5:1 ratio (# 301-266) * 1 - Aluminum clutch master cylinder, 3/4" bore (# 301-290) * 1 - Aluminum brake master cylinder, 7/8" bore (# 301-291) * 1 - Aluminum brake master cylinder, 1" bore (# 301-292).
  • Find more Pedals as well as many other high performance auto parts by visiting the Southwest Speed Amazon Store..
  • Southwest Speed Dual Brake and Clutch Pedal | * This pedal assembly combines the brake and clutch pedals together in one unit and positions the master cylinders inside t....
Check Stock

1\ Bore X 24\ Stroke Double Acting Pneumatic Cylinder (Roughly 1\ Bore 20MM)

  • These pneumatic cylinders are what everyone uses to make Halloween Props. They are extremely versatile, and have tons of mounting options that will allow you to set up your prop in may different ways.
  • You can also use these with a 2-way or 3-way solenoid if you are using gravity/weight to push the cylinder back down. When the solenoid is triggered, air is applied through the bottom hole - forcing rod up very quickly..
  • Examples: Lid Opener Pop-up props Moving Skeletons or Zombies Door Banger Coffin Lid Banger Barrel Lid Banger Monster in a Box Trash Can Trauma Bore.
  • These double-acting cylinders extend quickly when air is applied, and snap closed quickly when Solenoid is triggered (when used with a 4-way solenoid)..
  • This is the measure of the diameter of the cylinder. Bigger bore size = more air required to open cylinder = more torque (power) to move things. With this roughly 1" BORE, you will get about 100 lbs. of force at 100 PSI of air pressure. Stroke: This is the measure of how far out the shaft of the cylinder will extend when fully extended. Air Holes: Cylinder comes with two push-in fittings that accept 1/4" airline..
Check Stock

Dial Indicator Bore Gage 2' - 6' Range 0.001' Precision, Industrial Deep Engine Cylinder Measuring Tool with Carbide Anvils and Jewel Bearing, Silver Grey

  • Precise Measurement: The measuring range of cylinder dial bore gauge is 2″-6″, the accuracy is 0.001″.
  • High Accuracy Industrial Measurement: Users can measure cylinder out-of-roundness and taper without removing the piston with bore measurements up to 10″ deep – this diameter gauge can reach critical wear areas of the cylinder.
  • Sturdy and Wear-Resistant: The engine cylinder measuring tool is made of stainless steel, the measuring plunger contains a carbide tip, and the dial contains gem bearings, which effectively improves the durability of the cylinder inner diameter dial indicator.
  • High-Quality Probe: Sealed probe, glass mirror cover, waterproof and dustproof, insulated grip, effective heat insulation, clear scale, allowing you to see the data more intuitively.
  • Package: Contains all necessary spacers, interchangeable extensions and ABS storage case, easy to use and easy to assemble. If you encounter any problems during the use of our dial indicator bore gage, please feel free to contact us, we will solve the problem perfectly for you.
Check Stock

Isky Racing Cams 100-GRM Groove-O-Matic Engine Block Ringing Tool

  • Pilots in the cylinder bore & is easily adjustable for bore diameter and depth of cut for the copper 0-ring groove.
  • Fast and profitable way to "0-Ring" the cylinder block face.
Check Stock

Brush Research 1\ (25mm) Flex-Hone Cylinder Hone Tool 180 Grit (Silicon Carbide)

  • Flexible Cylinder Hone made of Silicon Carbide.
  • Hone is Made in USA by Brush Research Manufacturing.
  • Hone is self centering and can be used with 3/8" or 1/2" chuck drill.
  • Perfect for bore honing and cylinder refinishing.
  • The hone size listed on the product is the bore it is intended to be used for (or slightly smaller bore will work).
Check Stock

Brush Research 2\ (51mm) Flex-Hone Cylinder Hone Tool 240 Grit (Silicon Carbide)

  • Flexible Cylinder Hone made of Silicon Carbide.
  • Hone is Made in USA by Brush Research Manufacturing.
  • Hone is self centering and can be used with 3/8" or 1/2" chuck drill.
  • Perfect for bore honing and cylinder refinishing.
  • The hone size listed on the product is the bore it is intended to be used for (or slightly smaller bore will work).
Check Stock

Brush Research 3 3/4\ (95mm) Flex-Hone Cylinder Hone Tool 240 Grit (Silicon Carbide)

  • Flexible Cylinder Hone made of Silicon Carbide.
  • Hone is Made in USA by Brush Research Manufacturing.
  • Hone is self centering and can be used with 3/8" or 1/2" chuck drill.
  • Perfect for bore honing and cylinder refinishing.
  • The hone size listed on the product is the bore it is intended to be used for (or slightly smaller bore will work).
Check Stock

Brush Research 3 1/2\ (89mm) Flex-Hone Cylinder Hone Tool 320 Grit (Silicon Carbide)

  • Flexible Cylinder Hone made of Silicon Carbide.
  • Hone is Made in USA by Brush Research Manufacturing.
  • Hone is self centering and can be used with 3/8" or 1/2" chuck drill.
  • Perfect for bore honing and cylinder refinishing.
  • The hone size listed on the product is the bore it is intended to be used for (or slightly smaller bore will work).
Check Stock

Brush Research 1 1/8\ (29mm) Flex-Hone Cylinder Hone Tool 180 Grit (Silicon Carbide)

  • Flexible Cylinder Hone made of Silicon Carbide.
  • Hone is Made in USA by Brush Research Manufacturing.
  • Hone is self centering and can be used with 3/8" or 1/2" chuck drill.
  • Perfect for bore honing and cylinder refinishing.
  • The hone size listed on the product is the bore it is intended to be used for (or slightly smaller bore will work).
Check Stock

Brush Research 3 3/4\ (95mm) Flex-Hone Cylinder Hone Tool 400 Grit (Silicon Carbide)

  • Flexible Cylinder Hone made of Silicon Carbide.
  • Hone is Made in USA by Brush Research Manufacturing.
  • Hone is self centering and can be used with 3/8" or 1/2" chuck drill.
  • Perfect for bore honing and cylinder refinishing.
  • The hone size listed on the product is the bore it is intended to be used for (or slightly smaller bore will work).
Check Stock

Brush Research 1 1/4\ (31.8mm) Flex-Hone Cylinder Hone Tool 240 Grit (Silicon Carbide)

  • Flexible Cylinder Hone made of Silicon Carbide.
  • Hone is Made in USA by Brush Research Manufacturing.
  • Hone is self centering and can be used with 3/8" or 1/2" chuck drill.
  • Perfect for bore honing and cylinder refinishing.
  • The hone size listed on the product is the bore it is intended to be used for (or slightly smaller bore will work).
Check Stock

Alltrade 648439 Adj. Cylinder Hone Deglazer (2\ to 7\), Black

  • For deglazing engine cylinders 2" To 7" In diameter.
  • Knurled wheel adjusts spring pressure of stones against cylinder bore. Set screw and adjustable collar allow setting hone to 2 different maximum diameters for easier handling.
  • For deglazing engine cylinders 2-Inch to 7-Inch in diameter.
  • Knurled wheel adjusts spring pressure of stones against cylinder bore.
  • Set screw and adjustable collar allow setting hone to 2 different maximum diameters for easier handling.
  • Hone features 3 replaceable 4-Inch long 220 grit stones.
Check Stock

Oudtinx Dial Bore Gauge Set Range 2.0-6.0 Diameter Indicator Measuring Engine Cylinder Tool Kit

  • Precise Measurement: The measuring range of cylinder dial bore gauge is 2"-6", the accuracy is 0.001".
  • High Accuracy Industrial Measurement: Users can measure cylinder out-of-roundness and taper without removing the piston with bore measurements up to 10" deep - this diameter gauge can reach critical wear areas of the cylinder.
  • Sturdy and Wear-Resistant: The engine cylinder measuring tool is made of stainless steel, the measuring plunger contains a carbide tip, and the dial contains gem bearings, which effectively improves the durability of the cylinder inner diameter dial indicator.
  • High-Quality Probe: Sealed probe, glass mirror cover, waterproof and dustproof, insulated grip, effective heat insulation, clear scale, allowing you to see the data more intuitively.
  • Package: Contains all necessary spacers, interchangeable extensions and ABS storage case, easy to use and easy to assemble.
Check Stock