Categories

Best Smt Board

nullbits SNAP 75% Mechanical Keyboard Kit (Black)

  • The SNAP is a high-quality split 75% keyboard kit with tons of room for customization.
  • Use the SNAP together, or separate! It snaps together for a traditional 75% layout or pulls apart for use as a split board.
  • Built around a Pro Micro, rather than a discrete microcontroller. This saves assembly time, and also reduces the build difficulty.
  • All required parts (diodes, caps, and ICs) are through-hole, meaning they're easy and forgiving to solder.
  • RGB underglow ready: 10x optional bottom-mounted SMT LEDs shine nicely through the acrylic support material. RGB underglow is supported natively in QMK, allowing for easy programming and configuration.
Check Stock

NanoVNA Vector Network Analyzer Testboard Kit for NanoVNA NanoVNA-F NanoVNA-H NanoVNA-H4 Network Analysis Test Board Demo Board

  • This test board contains a plug-in test circuit suitable for VNWA Testboard, and a set of 0805 and 1206 patch test circuits are added..
  • Suitable Model: This test board kit is used for NanoVNA NanoVNA-H NanoVNA-H4 NanoVNA-F series vector network analyzer user-friendly measurement....
  • DIY kit,stable performance, high accuracy, high sensitivity.Made of fine quality material, has a long service life..
  • What you can get: The package includes Testboard x1, 6X SMA Female Adapter , 4x 6mm Copper Stud, 4x M2.5 Screw , 2x 40pin Round Socket ,2x 0805 49R9....
  • Please Note: Due to the SMT circuit cannot fully consider all kinds of test situations, some parts of the test may need to be cut over. Please ensure....
Check Stock

3.175mm Milling Cutter, Fine Workmanship Cemented Carbide 10Pcs Convenient Milling Cutter for CNC for PCB for SMT

  • The use of ultra-fine grained cemented carbide materials, with good milling and cutting performance.
  • The cutting edges, milling, holes and edges are of sharpness, with high efficiency.
  • Fine workmanship, clean and tidy surface, no burrs.
  • Including 10pcs milling cutters, convenient to replace and use.
  • Suitable For: PCB, SMT, CNC, mold, plastic fiber, carbon fiber and printed circuit board, etc..
Check Stock

3.175mm Milling Cutter, Convenient Fine Workmanship Coating Milling Cutter Sharpness Cemented Carbide for CNC for SMT for PCB

  • The use of ultra-fine grained cemented carbide materials, with good milling and cutting performance.
  • The cutting edges, milling, holes and edges are of sharpness, with high efficiency.
  • Fine workmanship, clean and tidy surface, no burrs.
  • Including 10pcs milling cutters, convenient to replace and use.
  • Suitable For: PCB, SMT, CNC, mold, plastic fiber, carbon fiber and printed circuit board, etc..
Check Stock

Milling Cutter, 3.175mm Milling Cutter, High Efficiency 10pcs Ultra-Fine Grained Cemented Carbide Materials for PCB SMT

  • Including 10pcs milling cutters, convenient to replace and use.
  • The cutting edges, milling, holes and edges are of sharpness, with high efficiency.
  • The use of ultra-fine grained cemented carbide materials, with good milling and cutting performance.
  • Suitable For: PCB, SMT, CNC, mold, plastic fiber, carbon fiber and printed circuit board, etc..
  • Fine workmanship, clean and tidy surface, no burrs.
Check Stock

APC UPS Battery Replacement APCRBC123 for APC UPS Models BR1000G BX1350M BN1350G BX1000G BX1300G SMT750RM2U SMT750RM2UC SMT750RM2UNC SMT750RMI2U SMT750RMI2UC SMT750RMI2UNC

  • Each APC Replacement Battery Cartridges (RBC) is tested and certified for compatibility to restore the performance of your APC UPS to original....
  • When you buy a new genuine APC RBC, you can recycle your old UPS battery via the "RBC Recycling Program" on the APC website. This program includes....
  • APCRBC123 is compatible with APC UPS models BR1000G, BX1350M, BN1350G, BX1000G, BX1300G, SMT750RM2U, SMT750RM2UC, SMT750RM2UNC, SMT750RMI2U,....
Check Stock

GRAPMKTG Charging Stand for Nintendo Switch Accessories Portable Dock Compatible for Nintendo Switch OLED Cute Case Decor Gift Men Women Kids Blue

  • Fit for Samsung Galaxy View SM-T670 T677 18.4 Tablet.
  • MODEL: SM-T670NZWAXAR , SM-T677VZKBVZW , SM-T677AZKBATT , SMT670NZWAXAR , SMT677VZKBVZW , SMT677AZKBATT SM-T670NZKAXAR or SM-767AZKBATT, KSAS0501900200HU GH44-02888B.
  • Designed for Portability, Stay Charged Wherever You Go ¨C Travel, Work, Home.
  • Output: 19V 2.1A 40W Input: 100-240V 50-60Hz.
  • Warranty: This product is eligible for replacement or refund within 30 days,and the manufacturer provides an additional 12 Months Warranty..
Check Stock

UL Listed 19V 2.1A AC Charger Fit for Samsung Galaxy View SM-T670 T677 18.4 Tablet Power Adapter Supply Cord

  • Fit for Samsung Galaxy View SM-T670 T677 18.4 Tablet.
  • MODEL: SM-T670NZWAXAR , SM-T677VZKBVZW , SM-T677AZKBATT , SMT670NZWAXAR , SMT677VZKBVZW , SMT677AZKBATT SM-T670NZKAXAR or SM-767AZKBATT, KSAS0501900200HU GH44-02888B.
  • Output: 19V 2.1A 40W Input: 100-240V 50-60Hz.
  • The new environmental protection circuit, low standby power consumption, low heat, with over-voltage, over current, Short circuit protection function.
  • Package Includes: 1 X AC Adapter, 1 X 5Ft Power Cord.
  • Warranty: This product is eligible for replacement or refund within 30 days,and the manufacturer provides an additional 12 Months Warranty..
Check Stock

4Pcs Tapered Ball Nose End Mill 0.25MM-1MM with 0.5MM Tip Diameter CNC Router Bits Set 2D 3D Woodworking Tool 2 Flute CNC Router Bits

  • 【High Quality】The end mills are made of ultra-fine tungsten carbide steel alloy, its nano black coating/titanium coating with high hardness and heat resistance..
  • 【End Mill Bits Set】4Pc【End Mill Set】4Pcs ball nose bit 2-flute, Nano black coat and titanium coat CNC router bits, will satisfying your different needs.s ball nose bit 2-flute, Nano black coat and titanium coat CNC router bits, will satisfying your different needs..
  • 【Parameter】Ball raidus 0.25mm, 0.5mm, 0.75mm, 0.1mm, flute length:15MM, overall length 1.5 inch, single side angle 5.12°..
  • 【Wide Compatibility】Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing,they are compatible with most desktop CNC machines..
  • 【Wide Application】PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, aluminum and other precision parts processing..
Check Stock

SainSmart Genmitsu 10Pcs Nano Blue Coat End Mill CNC Router Bits, 0.8-3mm, 1/8' Shank

  • ➤Cutting Edge Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.4/3.0mm), 10Pcs..
  • : ➤Advantage: With sufficient flexural strength and wear resistance, which ensure high work efficiency. Sharp cutting edge, milling, hole and plate edge, clean surface, neat, no glitches..
  • ➤Material: Using ultra-fine grained carbide material, with good milling and cutting performance..
  • ➤Application: PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, and other precision parts processing..
  • ➤Genmitsu CNC Bits Selection Guide: To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
Check Stock

UPSBatteryCenter Compatible Replacement Battery Pack for APC RBC55 Plug & Play

  • 100% Guaranteed Compatible Battery Pack for the APC RBC55.
  • For use with UPS model #: SUA2200, SUA2200I, SUA2200T, SUA2200XL, SUA2200XLT, SUA3000, SUA3000I, SUA3000T, SUA3000XL, SUA3000XLT, SMT200, SMT3000,....
  • In-Stock and Ready for Immediate Shipment - 1 Year Warranty included!.
  • Hot Swappable, No Downtime Required - Arrived assembled and ready for use.
Check Stock

ODOMY 57pcs Pin Vise Hand Drill Bits Mini Hand Drill Rotary Tool,46pcs 0.3-3.0mm Micro Twist Drill Bits and 10pcs PCB Mini Drill Bits for Resin Plastic Wood Jewelry Making

  • Practical and Portable: The hand-held drill is easy to carry or store in a toolbox or pocket, making your daily work more convenient, suitable for electronic assembly, tools, model making, winding, home decoration, etc..
  • Pin Vise Hand Drill: Aluminum alloy, sturdy and durable, its tail can be rotated, sturdy and easy to operate, Ideal for making pilot holes when fixing small item that you can’t hold eg plastic sleepers on the track..
  • You Will Receive:A total of 57 pieces of electric hand drill set for you to do hand-carving DIY work, Twist drill bit: 0.3-3mm, PCB micro drill: 0.1mm-1mm, Vise: 3.5*0.6inch..
  • PCB micro drill: PCB micro drill is made of tungsten carbide, suitable for processing PCB, ordinary FR-4, CEM-3 board, SMT, CNC, mold, plastic, circuit board, carbon fiber, composite board, etc..
  • Micro twist drill: The micro drill is light in weight and compact in size. It does not take up extra space. It is used to process wood, plastic, rubber, PVC, walnut, model, bone, angle steel, amber, olive, fiberglass, and other materials..
Check Stock

Weller W100P-3 Controlled Output Soldering Iron 100W 3-Wire Cord 115VAC

  • Powerful (100-watt) HAP1 pencil precisely delivers hot air to small SMT parts, reducing the risk of damage to adjacent components.
  • Compact design is ideal for soldering, desoldering of rework SMT components.
  • Air flow is actuated by a finger switch on the hot air pencil.
  • Easy to read LED display for fast and accurate temperature set of hot air.
  • Uses fast acting shop air or compressed nitrogen.
Check Stock