Soundstream TXP1.3500D Tarantula Xtreme Power Series Full Range Monoblock Amplifier
- 1-ohm Minimum Impedance Monoblock Operation.
- LED Accent Lighting Illuminates Circuit Board, for Your Viewing Pleasure.
- Silicone Steel Alloy Core Power Supply Transformers, & Flux Capacitors Military Grade SMT PCB Maintains Dynamic Performance.
- Direct Short, Thermal, & Overload Circuits Protect Amplifier 200mV-6V High Level or Low-Level RCA Input & Output.
- Variable 12dB High Pass, Low Pass, & Subsonic Crossovers Dash Mount Gain Control Module Included.
Check StockSFB-7900D - Sundown Audio Monoblock Class-D Amplifier
- Features: Double-sided SMT Epoxy PCB. Power Handling: 200 x 1 at 4-ohm | 350 x 1 at 2-ohm | 500 x 1 at 1-ohm. Painted Conformal Coating PCB Board, 1-Ohm Stable Circuit, Efficiency: 86% 4-Ohm at 100Hz, 12dB/Oct Variable Crossover Slope, Multi-way Protection Circuitry (Thermal/Over Current/Speaker Short/Speaker DC Protection), Input Sensitivity: 15V-0.5V, Variable Bass Boost: 0-9dB, Variable Low Pass Filter: 35Hz-160Hz, 10 Gauge Power Supply Connectors, Signal to Noise Ratio: >90dB, Damping Factor.
Check Stocknullbits SNAP 75% Mechanical Keyboard Kit (Black)
- The SNAP is a high-quality split 75% keyboard kit with tons of room for customization.
- Use the SNAP together, or separate! It snaps together for a traditional 75% layout or pulls apart for use as a split board.
- Built around a Pro Micro, rather than a discrete microcontroller. This saves assembly time, and also reduces the build difficulty.
- All required parts (diodes, caps, and ICs) are through-hole, meaning they're easy and forgiving to solder.
- RGB underglow ready: 10x optional bottom-mounted SMT LEDs shine nicely through the acrylic support material. RGB underglow is supported natively in QMK, allowing for easy programming and configuration.
Check StockNanoVNA Vector Network Analyzer Testboard Kit for NanoVNA NanoVNA-F NanoVNA-H NanoVNA-H4 Network Analysis Test Board Demo Board
- This test board contains a plug-in test circuit suitable for VNWA Testboard, and a set of 0805 and 1206 patch test circuits are added..
- Suitable Model: This test board kit is used for NanoVNA NanoVNA-H NanoVNA-H4 NanoVNA-F series vector network analyzer user-friendly measurement....
- DIY kit,stable performance, high accuracy, high sensitivity.Made of fine quality material, has a long service life..
- What you can get: The package includes Testboard x1, 6X SMA Female Adapter , 4x 6mm Copper Stud, 4x M2.5 Screw , 2x 40pin Round Socket ,2x 0805 49R9....
- Please Note: Due to the SMT circuit cannot fully consider all kinds of test situations, some parts of the test may need to be cut over. Please ensure....
Check Stock3.175mm Milling Cutter, Fine Workmanship Cemented Carbide 10Pcs Convenient Milling Cutter for CNC for PCB for SMT
- The use of ultra-fine grained cemented carbide materials, with good milling and cutting performance.
- The cutting edges, milling, holes and edges are of sharpness, with high efficiency.
- Fine workmanship, clean and tidy surface, no burrs.
- Including 10pcs milling cutters, convenient to replace and use.
- Suitable For: PCB, SMT, CNC, mold, plastic fiber, carbon fiber and printed circuit board, etc..
Check Stock3.175mm Milling Cutter, Convenient Fine Workmanship Coating Milling Cutter Sharpness Cemented Carbide for CNC for SMT for PCB
- The use of ultra-fine grained cemented carbide materials, with good milling and cutting performance.
- The cutting edges, milling, holes and edges are of sharpness, with high efficiency.
- Fine workmanship, clean and tidy surface, no burrs.
- Including 10pcs milling cutters, convenient to replace and use.
- Suitable For: PCB, SMT, CNC, mold, plastic fiber, carbon fiber and printed circuit board, etc..
Check StockMilling Cutter, 3.175mm Milling Cutter, High Efficiency 10pcs Ultra-Fine Grained Cemented Carbide Materials for PCB SMT
- Including 10pcs milling cutters, convenient to replace and use.
- The cutting edges, milling, holes and edges are of sharpness, with high efficiency.
- The use of ultra-fine grained cemented carbide materials, with good milling and cutting performance.
- Suitable For: PCB, SMT, CNC, mold, plastic fiber, carbon fiber and printed circuit board, etc..
- Fine workmanship, clean and tidy surface, no burrs.
Check StockAPC UPS Battery Replacement APCRBC123 for APC UPS Models BR1000G BX1350M BN1350G BX1000G BX1300G SMT750RM2U SMT750RM2UC SMT750RM2UNC SMT750RMI2U SMT750RMI2UC SMT750RMI2UNC
- Each APC Replacement Battery Cartridges (RBC) is tested and certified for compatibility to restore the performance of your APC UPS to original....
- When you buy a new genuine APC RBC, you can recycle your old UPS battery via the "RBC Recycling Program" on the APC website. This program includes....
- APCRBC123 is compatible with APC UPS models BR1000G, BX1350M, BN1350G, BX1000G, BX1300G, SMT750RM2U, SMT750RM2UC, SMT750RM2UNC, SMT750RMI2U,....
Check StockGRAPMKTG Charging Stand for Nintendo Switch Accessories Portable Dock Compatible for Nintendo Switch OLED Cute Case Decor Gift Men Women Kids Blue
- Fit for Samsung Galaxy View SM-T670 T677 18.4 Tablet.
- MODEL: SM-T670NZWAXAR , SM-T677VZKBVZW , SM-T677AZKBATT , SMT670NZWAXAR , SMT677VZKBVZW , SMT677AZKBATT SM-T670NZKAXAR or SM-767AZKBATT, KSAS0501900200HU GH44-02888B.
- Designed for Portability, Stay Charged Wherever You Go ¨C Travel, Work, Home.
- Output: 19V 2.1A 40W Input: 100-240V 50-60Hz.
- Warranty: This product is eligible for replacement or refund within 30 days,and the manufacturer provides an additional 12 Months Warranty..
Check StockUL Listed 19V 2.1A AC Charger Fit for Samsung Galaxy View SM-T670 T677 18.4 Tablet Power Adapter Supply Cord
- Fit for Samsung Galaxy View SM-T670 T677 18.4 Tablet.
- MODEL: SM-T670NZWAXAR , SM-T677VZKBVZW , SM-T677AZKBATT , SMT670NZWAXAR , SMT677VZKBVZW , SMT677AZKBATT SM-T670NZKAXAR or SM-767AZKBATT, KSAS0501900200HU GH44-02888B.
- Output: 19V 2.1A 40W Input: 100-240V 50-60Hz.
- The new environmental protection circuit, low standby power consumption, low heat, with over-voltage, over current, Short circuit protection function.
- Package Includes: 1 X AC Adapter, 1 X 5Ft Power Cord.
- Warranty: This product is eligible for replacement or refund within 30 days,and the manufacturer provides an additional 12 Months Warranty..
Check StockLRT 8858 Micro Hot Air Rework Station SMD Desoldering Station Digital 100-500℃(212-932℉)
- Portable hot air gun, Small size, Sleep function, Energy saving, Long life, Anti-static design..
- The temperature adjustment range is 100-500℃ (212-932℉), ℃/℉ Convertible. The air volume can be adjusted, F1-F10. With power switch, there is no need to unplug the power plug..
- The use of long-life infrared heating elements and special temperature sensing devices, as well as microcomputer precision control of heat conduction technology, make the temperature control curve of the hot air gun meet the requirements of the SMT production process..
- Widely used in mobile phone repair, computer repair, electronic component welding, suitable for beginners, DIY, professionals. It is simple to set up and easy to operate..
- Comes with 6 pcs air nozzles (Diameter=3/4/5/6/8/10mm), two anti-static tweezers (straight and elbow), IC puller..
Check Stock4Pcs Tapered Ball Nose End Mill 0.25MM-1MM with 0.5MM Tip Diameter CNC Router Bits Set 2D 3D Woodworking Tool 2 Flute CNC Router Bits
- 【High Quality】The end mills are made of ultra-fine tungsten carbide steel alloy, its nano black coating/titanium coating with high hardness and heat resistance..
- 【End Mill Bits Set】4Pc【End Mill Set】4Pcs ball nose bit 2-flute, Nano black coat and titanium coat CNC router bits, will satisfying your different needs.s ball nose bit 2-flute, Nano black coat and titanium coat CNC router bits, will satisfying your different needs..
- 【Parameter】Ball raidus 0.25mm, 0.5mm, 0.75mm, 0.1mm, flute length:15MM, overall length 1.5 inch, single side angle 5.12°..
- 【Wide Compatibility】Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing,they are compatible with most desktop CNC machines..
- 【Wide Application】PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, aluminum and other precision parts processing..
Check StockSainSmart Genmitsu 10Pcs Nano Blue Coat End Mill CNC Router Bits, 0.8-3mm, 1/8' Shank
- ➤Cutting Edge Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.4/3.0mm), 10Pcs..
- : ➤Advantage: With sufficient flexural strength and wear resistance, which ensure high work efficiency. Sharp cutting edge, milling, hole and plate edge, clean surface, neat, no glitches..
- ➤Material: Using ultra-fine grained carbide material, with good milling and cutting performance..
- ➤Application: PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, and other precision parts processing..
- ➤Genmitsu CNC Bits Selection Guide: To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
Check Stock