Categories

Best Socket Set Screw Installation Instructions

Westek Outdoor Motion Sensor Light Adapter – This Outside Motion Activated Socket Control Turns On Lights When Movement is Detected – Screw In Adapter, 20ft Distance – OMLC163BC

  • ...adjustable sensor panel for optimum movement detection.
  • SO MANY USES – This motion sensing light socket is ideal for unoccupied, vacation and rental properties. Keep the exterior of your property lit in the darkness but only when required. Save energy and money and forget worrying about turning off the lights.
  • EASY INSTALLATION – Screw-in the motion sensor adapter, no tools or wires are required. Read enclosed instructions to assist with install and troubleshooting. Not designed for lights with an enclosed fixture. OMLC163BC.
Check Stock

Powerbuilt Harmonic Balancer Puller and Installer Tool Set, Install and Remove Kit, Cars and Light Trucks, Storage Case - 648637

  • Strong and dependable enough to last a lifetime.
  • Kit services: many automobiles and light trucks.
  • Tool set for removal and installation of harmonic balancers that have threaded holes.
  • Removal pieces: combo yoke, national fine center screw, center point piece and bolt pairs.
  • Installation pieces: national fine center screw, thrust bearing, forcing nut and jaw nut.
  • Adapters included: M12-1.5, M14-1.5, M16-2.0, 7/16-Inch-20, 1/2-Inch-20, 9/16-Inch-18 and 3/416.
  • Kit 12 includes 22-Piece for removal and installation of harmonic balancers with threaded holes.
Check Stock

Kobalt 338635 16-Piece 1/2-Inch Drive 6-Point Deep Impact Socket Set, Metric, includes 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, and 25-mm Sockets

  • ...ium steel for superior strength, each adapter with corrosion-resistant black phosphate finish for against rust and corrosion. Detent ball on adapters provides a secure fit into the socket,reduces wear and prevents rounding off at corners,ensuring does not wobble while working..
  • ▶【Multifunction-3Pcs】Used in the installation of pneumatic screwdriver, electric screwdriver, pneumatic drill, manual screwdriver and other installation for the hexagonal tool .It is a good accessory for conversion. for Universal Socket,Impact Adapter and Reducer Set,Universal Joint Set,Socket Adapter and Drive Reducer Set,Drive Impact Socket Extension Bar Set,Drive Impact Socket Set..
  • ▶【Purpose-3Pcs】: This adapter set is designed to provide a securely locked in extension to your existing tool. Provides additional length to reach into a multitude of hard to reach spaces. The spring ball lock ensures a tight fit into the driver head to prevent slipping during use. Specifically machined to fit securely into a hand held driver, drill driver or impact wrench..
  • ▶【Wide application-105°Right Angle Drill Driver】Can be connected to the drill, rechargeable drill or manual wrench, extending their reach to inaccessible stenosis , twisting screws, nut and more【Features】....
Check Stock

Stainless Steel Closet Rod Bracket, 1-1/4 Inch Diameter Closet Rod Holder 2 Pcs, Heavy Duty Curtain Rod Holder, Black Closet Rod Support with Screws

  • ... surface. If you have any question, please contact us for help we will reply within 24 hours..
  • *Functional U Shape Design - Designed for use with closet rods by 1-1/4 inch in diameter, Closet Rod Holders support stainless steel, solid wood, aluminum alloy and PVC pipe. U Shaped Open Type Closet Pole Socket for quick Installation and disassembly..
  • *Easy installation - Select the position you want to install, mark the screw holes with a pen, drill and clean the hole debris, knock the anchor into the hole, and then screw it through the socket screw hole and fix it, then secure the other closet rod brackets. Pay attention to whether the two sockets are on the same level. The mount has a screw on the side to tighten against the rod so that the rod doesn't slide around..
Check Stock

Hotop 20 Sets Skate Wheel Socket Screw Inline Roller Skate Screws Shaft Hex Socket Screw with 2 Pieces Installation Tool

  • Enough quantity: you will receive 20 sets of skate wheel socket screws with 2 pieces installation tools, enough amounts to meet your long-term using needs.
  • Precision size: the width of the socket screw hex measures approx. 5/32 inch/ 4 mm, and the shaft diameter is about 15/64 inch/ 6 mm, the overall size measures approx. 37 x 13 mm/ 1.5 x 0.5 inches, please confirm the size before buying.
  • Quality material: these skate wheel socket screws are made of quality metal, which possess good performance, sturdy and reliable to improve the service life and durability of bearings.
  • Simple installation: you can easily fix the two ends of the skate wheel socket screw with the installation tool we provide, and then install your on the skates, easy and convenient to use.
  • Easy to carry: these inline roller skate wheel socket screws are small in size, they are packed in a box, easy and portable for you to carry and store.
Check Stock

22 Flexible Drill Extension Hex Shank Drill Bit Kit Rotatable Joint Socket 1/4 3/8 1/2 Inch Hex Socket Adapter Socket Bendable Drill Bit Extension Screwdriver 105 Degree Angle Drill Bit Extension

  • ...tension, 1 piece socket wrench and 3 pieces magnetic screwdriver bit sets, nice and adequate to use in daily life.
  • Socket adapter set: socket adapters set and 360 degree rotatable power drill adapters set, each set come with 1/ 4 inch, 3/ 8 inch, 1/ 2 inch, each with a 1/ 4 inch hex drill bits, widely applied in the installation of electric screwdriver, manual screwdriver and other installation for the hexagonal tool.
  • Suitable for standard 1/ 4 to 3/ 4 inches and metric 7 mm to 19 mm screws.
  • Flexible function: flexible drill extension kit and bendable drill bit extension can be twisted and rotated at different angles.
  • It can be connected to the drill, a charging bit or a manual wrench, thus improving you work efficiency.
  • Wide applications: this impact socket adapter set is suitable for light drilling, slow speed or screw drives, ratchet hand screwdrivers and so on, which can be applied at homes, warehouses, garages, repair shops, daily repairs, etc., and this impact driver socket adapter is light and compact, convenient to carry outside and store.
  • Screwdriver bit: there are 3 pieces 1/ 4 inch hex shank drill bits, adopting quality steel materials, practical and reliable, featuring high strength and wear resistance, with length of 60 mm, 100 mm and 150 mm....
Check Stock

Cosweet 6 Packs Stainless Steel Closet Pole Sockets- Closet Rod End Supports, Flange Set Rod Holder with Screws for Easy Installation&Quick Removal (U Shaped)

  • ... surface. If you have any question, please contact us for help we will reply within 24 hours..
  • *Functional U Shape Design - Designed for use with closet rods by 1-1/4 inch in diameter, Closet Rod Holders support stainless steel, solid wood, aluminum alloy and PVC pipe. U Shaped Open Type Closet Pole Socket for quick Installation and disassembly..
  • *Easy installation - Select the position you want to install, mark the screw holes with a pen, drill and clean the hole debris, knock the anchor into the hole, and then screw it through the socket screw hole and fix it, then secure the other closet rod brackets. Pay attention to whether the two sockets are on the same level. The mount has a screw on the side to tighten against the rod so that the rod doesn't slide around..
Check Stock

Impact Grade Driver Sockets Adapter Extension Set Drill Bit+Right Angle Drill,3Pcs 1/4 3/8 1/2' Universal Socket Adapter Set,105 Degree Right Angle Screwdriver set Drill Hex Bit Socket Adapter

  • ☆【Wide application】105°Right Angle Drill Driver Can be connected to the drill, rechargeable drill or manual wrench, extending their reach to inaccessible stenosis , twisting screws, nut and more..
  • ☆【Multifunction] 3Pcs1/4 3/8 1/2"Square Nut Hex Shank Driver Drill Bit Used in the installation of pneumatic screwdriver, electric screwdriver, pneumatic drill, manual screwdriver and other installation for the hexagonal tool .It is a good accessory for conversion. for Universal Socket,Impact Adapter and Reducer Set,Universal Joint Set,Socket Adapter and Drive Reducer Set,Drive Impact Socket Extension Bar Set,Drive Impact Socket Set..
  • ☆【Features】105° designs for tight spaces, extends the power of a cordless screwdriver - 100 in/lbs. torque, 400 RPM.These Tools are Work Great for Light Drilling,Slow Speed/Screw Driving,Like Cordless Drill,Ratchet Hand Screwdriver,etc..
  • ☆【High Quality】105°Angle Extension Made of Chrome Vanadium steel, high hardness angle drill bit holder, anti rust, durable die cast body with 3 ball bearings for long life [Strong Magnet] Built in strong magnet for good holding power, this right angle drill attachment is easy to use and avoid falling off [Easy To Use] 105 degree angle extension, 360° parallel adjustment,....
Check Stock

30 Flexible Drill Bit Extension Hex Shank Rotatable Joint Socket 1/4, 3/8, 1/2 Inch Hex Adapter Socket Bendable Drill Bit Extension Screwdriver Drill Bit Holder 105 Degree Angle Drill Tool

  • ...ct driver socket adapters, nice combination for daily using and replacement.
  • Nice rocket adapter set: socket adapters set, 360 degree rotatable power drill adapters set and power drill sockets adapter set, each set come with 1/ 4 inch, 3/ 8 inch, 1/ 2 inch, each with a 1/ 4 inch hex drill bits, widely applied in the installation of electric screwdriver, manual screwdriver and other installation for the hexagonal tool.
  • Applicable for standard 1/ 4 to 3/ 4 inches and metric 7 to 19 mm/ 0.3 to 0.7 inches screws.
  • Flexible twisted and rotated: flexible drill extension kit and bendable drill bit extension can be twisted and rotated at different angles, which can be attached to a drill, a charging bit or a manual wrench, thus work efficiency can be improved and productivity can be increased.
  • Broad utilization: this impact socket adapter set is applicable for light drilling, slow speed or screw drives, ratchet hand screwdrivers and so on, which fits for homes, warehouses, garages, repair shops, daily repairs and so on, light weight and compact in size, easy to carry and store.
  • Screwdriver bit: totally 3 pieces 1/ 4 inch hex shank drill bits, with quality steel material, sturdy and hard, high strength and wear resistance, with length of 60 mm/ 2.4 inch, 100 mm/ 4....
Check Stock

CIGOTU Impact Grade Power Hand Tools Driver Sockets Adapter Extension Set, 3Pcs 1/4 3/8 1/2\ Hex Shank Drill Nut Driver Bit Set + 105 Degree Right Angle Driver Extension Screwdriver Drill Attachment

  • ...ium steel for superior strength, each adapter with corrosion-resistant black phosphate finish for against rust and corrosion. Detent ball on adapters provides a secure fit into the socket,reduces wear and prevents rounding off at corners,ensuring does not wobble while working..
  • ▶【Multifunction-3Pcs】Used in the installation of pneumatic screwdriver, electric screwdriver, pneumatic drill, manual screwdriver and other installation for the hexagonal tool .It is a good accessory for conversion. for Universal Socket,Impact Adapter and Reducer Set,Universal Joint Set,Socket Adapter and Drive Reducer Set,Drive Impact Socket Extension Bar Set,Drive Impact Socket Set..
  • ▶【Purpose-3Pcs】: This adapter set is designed to provide a securely locked in extension to your existing tool. Provides additional length to reach into a multitude of hard to reach spaces. The spring ball lock ensures a tight fit into the driver head to prevent slipping during use. Specifically machined to fit securely into a hand held driver, drill driver or impact wrench..
  • ▶【Wide application-105°Right Angle Drill Driver】Can be connected to the drill, rechargeable drill or manual wrench, extending their reach to inaccessible stenosis , twisting screws, nut and more【Features】....
Check Stock

3Pcs 1/4' 3/8' 1/2'Hex Socket Adapter Drill Bits Set,Impact Grade Socket Wrench Adapter Extension Set,105°Right Angle Drill Bit Adapter Attachment 1/4' Drive Hex Magnetic Bit Socket Screwdriver Drill

  • ☞Multifunction:3Pcs1/4 3/8 1/2"Square Nut Hex Shank Driver Drill Bit Used in the installation of pneumatic screwdriver, electric screwdriver, pneumatic drill, manual screwdriver and other installation for the hexagonal tool .It is a good accessory for conversion. for Universal Socket,Impact Adapter and Reducer Set,Universal Joint Set,Socket Adapter and Drive Reducer Set,Drive Impact Socket Extension Bar Set,Drive Impact Socket Set.
  • ☞Wide application:105°Right Angle Drill Driver Can be connected to the drill, rechargeable drill or manual wrench, extending their reach to inaccessible stenosis , twisting screws, nut and more.
  • ☞Features:105° designs for tight spaces, extends the power of a cordless screwdriver - 100 in/lbs. torque, 400 RPM.These Tools are Work Great for Light Drilling,Slow Speed/Screw Driving,Like Cordless Drill,Ratchet Hand Screwdriver,etc..
  • ☞High Quality:105°Angle Extension Made of Chrome Vanadium steel, high hardness angle drill bit holder, anti rust, durable die cast body with 3 ball bearings for long life [Strong Magnet] Built in strong magnet for good holding power, this right angle drill attachment is easy to use and avoid falling off [Easy To Use] 105 degree angle extension, 360° parallel adjustment, perfect handy tool f....
Check Stock

Impact Grade Driver Sockets Adapter Extension Set Drill Bit+Right Angle Drill,3Pcs 1/4 3/8 1/2" Universal Socket Adapter Set,105 Degree Right Angle Screwdriver set Drill Hex Bit Socket Adapter

  • ☆【Wide application】105°Right Angle Drill Driver Can be connected to the drill, rechargeable drill or manual wrench, extending their reach to inaccessible stenosis , twisting screws, nut and more..
  • ☆【Multifunction] 3Pcs1/4 3/8 1/2"Square Nut Hex Shank Driver Drill Bit Used in the installation of pneumatic screwdriver, electric screwdriver, pneumatic drill, manual screwdriver and other installation for the hexagonal tool .It is a good accessory for conversion. for Universal Socket,Impact Adapter and Reducer Set,Universal Joint Set,Socket Adapter and Drive Reducer Set,Drive Impact Socket Extension Bar Set,Drive Impact Socket Set..
  • ☆【Features】105° designs for tight spaces, extends the power of a cordless screwdriver - 100 in/lbs. torque, 400 RPM.These Tools are Work Great for Light Drilling,Slow Speed/Screw Driving,Like Cordless Drill,Ratchet Hand Screwdriver,etc..
  • ☆【High Quality】105°Angle Extension Made of Chrome Vanadium steel, high hardness angle drill bit holder, anti rust, durable die cast body with 3 ball bearings for long life [Strong Magnet] Built in strong magnet for good holding power, this right angle drill attachment is easy to use and avoid falling off [Easy To Use] 105 degree angle extension, 360° parallel adjustment,....
Check Stock

Impact Grade Driver Sockets Adapter Extension Set Drill Bit 3Pcs 1/4 3/8 1/2\ Universal Socket Adapter Set and Right Angle Drill 105 Degree Right Angle Screwdriver set Drill Hex Bit Socket Adapter

  • ☆【Multifunction] 3Pcs1/4 3/8 1/2"Square Nut Hex Shank Driver Drill Bit Used in the installation of pneumatic screwdriver, electric screwdriver, pneumatic drill, manual screwdriver and other installation for the hexagonal tool .It is a good accessory for conversion. for Universal Socket,Impact Adapter and Reducer Set,Universal Joint Set,Socket Adapter and Drive Reducer Set,Drive Impact Socket Extension Bar Set,Drive Impact Socket Set..
  • ☆【Wide application】105°Right Angle Drill Driver Can be connected to the drill, rechargeable drill or manual wrench, extending their reach to inaccessible stenosis , twisting screws, nut and more..
  • ☆【Features】105° designs for tight spaces, extends the power of a cordless screwdriver - 100 in/lbs. torque, 400 RPM.These Tools are Work Great for Light Drilling,Slow Speed/Screw Driving,Like Cordless Drill,Ratchet Hand Screwdriver,etc..
  • ☆[High Quality] 105°Angle Extension Made of Chrome Vanadium steel, high hardness angle drill bit holder, anti rust, durable die cast body with 3 ball bearings for long life [Strong Magnet] Built in strong magnet for good holding power, this right angle drill attachment is easy to use and avoid falling off [Easy To Use] 105 degree angle extension, 360° parallel adjustment, pe....
Check Stock