Best Socket Tool Holder

6PCS Socket Organizer Tray Set, Red SAE & Black Metric Socket Storage Trays, 1/4-Inch, 3/8-Inch & 1/2-Inch Drive Deep and Shadow Socket Holders for Toolboxes

ELIMINATE TOOLBOX CLUTTER & SAVE TIME – This complete socket trays set is designed for eliminating your toolbox cutter and keeping it organized. Make it convenient for you to find the dedicated socket instantly.
TOOL BOX SOCKET ORGANIZER: Store and organize 1/4”, 3/8”, and 1/2” drive sockets.
These socket organization trays store a wide array of the most popular SAE and Metric mechanic sockets.
Sockets organizer stores shallow and deep-well sockets.
LONG-LASTING SOCKET STORAGE: This lightweight socket organizer for toolboxes is made of a rugged ABS plastic that is strong enough to endure a lifetime of use.
Durable socket organizer tray for toolbox storage is designed with professionals in mind.
ORGANIZED WORKSPACE: Toolbox organizer tray posts are clearly labeled with measurements for easy identification.
Never misplace another socket with this labeled socket organizer.
Our plastic socket holder cleans up cluttered tool boxes and workspaces.
COMPREHENSIVE SAE AND METRIC SOCKET HOLDER SET: 1/8” - 5/8”, 4mm - 15mm (1/4" drive socket organizers).
1/4” - 1”, 6mm - 20mm (3/8 socket organizer).

Check Stock

Precision Defined Aluminum Tool Socket Holder Replacement Clips, 3/8-Inch, 10-Pack, Spring Loaded Ball Bearing | Metric or SAE Sockets

✅ EXTRA CLIP (10-Pack) – For owners already with the PD tool socket organization rails, get the extra 10-pack to add to your rail or as a replacement if a few sockets suddenly go missing. Get the essential organization tool for any mechanic, tradesman and DIY specialist. These tool box socket holders organize and protect your sockets from a jumbled mess and getting lost from job to job..
✅ SPRING LOADED: Each socket clip is firm and secure. Easily swap different size sockets in and out of each rail and customize to your socket set. Fits Metric or SAE sockets.
✅ 360 ROTATION: PD Tool Socket Holder Rail clips rotate 360 degrees to allow you to easily turn and spin your sockets to read the size. For those that are OCD about our sockets, get the perfect rail for you so all sockets are neatly organized and stored with the size in one spot..
✅ AVOID CLUTTER: No one likes searching for tool sockets in a messy workspace. You will easily lose them in your full array of tools. Simply use Precision Defined’s aluminum tool socket trays to clean your man cave!.
✅ FITS PD SOCKET HOLDERS: Fits only Precision Defined tool socket holders. **Sockets ONLY, Rails sold separately..

Check Stock

ABN Black Aluminum SAE Socket Holder Rail 3-Piece Set – 1/4, 3/8, 1/2 Inch Socket Rails and 16 Clips Tool Organizer

STAY ORGANIZED: Use the ABN Black Aluminum Socket Rail Tool Socket Organizer Tray SAE 3-Piece Set – 1/4″, 3/8”, 1/2″ Inch Socket Holders Organizers and 16 Socket Clips to better organize your tool parts.
This socket set organizer accepts both shallow and deep sockets.
USE ANYWHERe: Use the 17-inch x 0.82-inch (43cm x 2cm) rails as socket organizers for toolboxes drawer to organize your toolbox, wall socket organizer as you mount on a wall vertically or horizontally, socket tray as you set it on your workbench, or tool drawer organizer as you store it in a drawer.
1-inch x 0.2-inch (25mm x 5mm) keyhole slots to mount on any surface (hardware not included).
SAE standard 1/4-inch, 3/8-inch, 1/2-inch socket drives.
BUILT TO LAST: Tool socket holder rail constructed from aluminum with black finish for strength and longevity.
Socket clips constructed from heavy-duty plastic.
End caps constructed from soft plastic (caps removable).
Set holds up to 48 sockets (16 sockets per rail).
SECURE YOUR TOOLS: Spring-loaded ball bearings on each clip offer a firm and secure hold.
Your sockets attach to plastic clips which are friction fit to the aluminum rail.
The clips are held in place by soft plastic end caps that are also friction fit to the rail.

Check Stock

KCHEX 15pcs Socket Rails 1/4" 3/8" 1/2" 16 Clip On Rail Tool Organizer Storage

✔ Fifteen-piece set socket holder can be wall mounted or placed in your tool box drawer to keep sockets organized for quick and easy identification..
✔ The socket organizer fits both standard and deep sockets. All together this socket holder set stores up to 240 different sockets..
✔ Fits most socket designs, and holds both standard and deep sockets.
✔ 5 Rails for 1/4 in., 3/8 in. and 1/2 in. drive each.
✔ Steel retainer for secure grip, easy on-and-off.

Check Stock

ABN Large SAE Standard Socket Holder Tray Rack Rails – 1/4, 3/8, 1/2 Inch Drive 80-Piece Clips for Tool Organization

[Organize Your Toolkit]: Shuffling through a mismatched tool kit drawer to look for the exact part you are looking for is inefficient and tiresome.
Use the ABN Large SAE Standard Socket Holder Tray Rack Rails – 1/4", 3/8”, 1/2" Inch Drive 80-Piece Clips to better organize your tools and parts.
[Mount Anywhere]: Use this socket holder to organize pieces in your toolbox, on a wall, on your workbench, in a drawer, and anywhere else you need it.
16-1/5” x 6-1/10” inch (41.2cm x 15.5cm) base size is lightweight and portable.
[Built to Last]: Depend on this pegboard socket organizer to withstand repeated, extended use for your projects.
Rail constructed from powder coated metal base for strength and longevity.
Clips and rails constructed from nickel plated steel.
[Keep Your Parts Secure]: No need to worry about losing parts and pieces.
Tool organizer offers a secure hold on sockets to ensure mounting and removing is a breeze.
[For Your Sockets]: Socket trail tray 1 pack set can hold up to 80 sockets (30 sockets with 1/2-inch drives – 1.5 rails, 30 sockets wi....

Check Stock

ATP 50mm Cranks Crankshaft Pulley Removal Wrench Holder Tool Remover and Installer Socket Wrench Removal Holding Spanner kit Compatible with Honda and Acura Engines

Premium Quality: The remover and installer socket wrench is designed with hardened chrome molybdenum steel construction, coated with black paint which prevention corrosion, heavy duty sturdy and durable..
Specifications: The 50mm crankshaft crank pulley wrench holder tool is of 2.2 inches by 5.8 inches by 5.9 inches, weight 1.3-pounds..
Hexagonal Shape Design: This crankshaft crank pulley removal tool is designed with a hexagonal shape with a hole in the center of the tool, that allows the use of a socket and extension to help loosen or tighten the pulley bolt..
Great Function: The 50mm cranks crankshaft pulley removal wrench holder tool is used to maintain the harmonic damper pulley position while removing/installing the pulley bolt and prevent it from rotaing as you install or remove many Acura and Honda engine crank bolts..
Great Compayibility: This crankshaft crank pulley removal tool adopts small compact and center hollow design, the crankshaft pulley wrench gets into tight engine spaces easily when servicing the engine and powertrain, fits for most Honda and Acura engines..

Check Stock

DURATECH 4 Pack 12' Magnetic Tool Holder Strip, Heavy Duty Magnetic Tool Bar, Magnetic Space Saving Tool Organizer with Mounting Screws for Garage, Workshop, Kitchen

...or shed. The magnetic tool holder is also expandable by connecting multiple strips..
【WIDE APPLICATION】The heavy-duty magnetic tool rack is efficient magnetic tool organize for garages, workshops, kitchens. You can use them hold knives and cutlery in your kitchen, or screwdrivers, saw blades in your workshop, or socket and ratchet handle in your garage..
【PACKAGE INCLUDING】The magnetic tool bar set including 4 pieces of 12-inch strips, brackets, and mounting screws. Save counter and drawer space with DURATECH magnetic tool holder..

Check Stock

ABN Flexible Tool Tray - Silicone Rubber Tools Organizer, Non Slip Tool Holder Tray for Organizing Parts, 10in x 9in

[Organize Your Tools]: Whether you are performing maintenance on your vehicle or crafting a DIY project, use the ABN Orange Rubber Tool Tray Flexible Non Slip Tool Tray to hold parts and tools for you.
Use this silicone tool tray for your workshop and garage.
[No More Slippage]: Save time and energy using this parts tray to prevent the dropping of your parts and tools.
Non-slip smooth backing of tool tray holder allows you to place holder on curved or slanted surfaces.
Ridges in center compartment keep tools in place.
[Sections for Your Tools]: Keep your tools and small parts on hand while you work on your vehicle or are woodworking.
Flexible nonslip tool holder has space to hold your wrenches, nails, sockets, screws, and more in the included 4 notches, 2 large pockets, 3 small pockets, 5 socket holes.
[Flexible Silicone Rubber]: No need to worry about this non slip flexible tool organizer falling apart after extended, repeated use.
Silicone parts tray allows for the easy cleanup of grime, dirt, and oil.
[Perfect Size]: Silicone tool tray measures 10 x 9 x 1 inches (26 x 22 x 2cm).
Set rubber work tray in your toolbox, your car's engine compartment, or even the wing of your plane.
Package includes 1 flexible non slip tool holder for your workshop.

Check Stock

DIY Universal Socket Wrench Tools Set Adapter Handy Grip 7-19mm Stocking Stuffers Christmas Gifts for Men Rounded bolt/Screw Remover Multi-Function Mini Super Socket Holder Gadget Automotive Tool

Suitability - Universal socket holder wrench garage set suitable for standard ¼ to ¾ metric 7mm to 19mm nuts, bolts and weird shaped screws..
Quality – Homoutils new universal socket is a multi-functional tool, made from top quality chrome tungsten steel, this tool is durable, easy to use....
Design – Magic honeycomb design in which each strut can independently move to the required angle to complete task at hand..
Use - It can be used in most electric drills, ratchet spanners and screwdriver. The exceptional design can grasp the hex nut, wing nuts, screw eye,....
Gift ideas – Homoutils universal socket is the best small handy gedgets multi power tool gift set for cool Men, Dad, Partner and father’s day....

Check Stock

WORKPRO 3/8-inch Magnetic Socket Organizer Set 2-Piece SAE & Metric Socket Holders Holds 52 Standard and Deep Sockets for Tool Box Tool Carts Sockets Not Included

Powerful Magnetic to Store Sockets Anywhere: Magnetic socket organizer keeps your sockets neatly stored in drawers or mounted on the side of a tool cart. The sturdy ferrite magnet base has a strong magnetic force to keep your socket in the tray and secure the tray to any ferromagnetic surface..
High Capacity & Clear Specifications: The WORKPRO Magnetic Socket Organizers accommodate both SAE and metric sockets, and can store up to 52 metric and SAE sockets (6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1"). Bring all the sockets together in one organizer for efficient and orderly work..
Scratch-Free Mounting: Choose this magnetic socket organizer to protect other items in your garage or tool room from fraying with the storage sleeve. The material of PP+PVC soft magnet can avoid scratches to the greatest extent, and the magnetic base with rubber at the bottom will not scratch any of your tool surfaces..
Fit for Standard & Deep Sockets: Each magnetic socket holder is designed to securely store deep and standard metric&SAE sockets. Multiple size options allow your sockets to take their place and keep your work environment....

Check Stock

4PCS Universal Socket Grip Tool Set, Linkstyle 7mm-19mm Socket Wrench with Power Drill Adapter Multi-Function Wrench Repair Kit Ratchet Gadgets, Gifts for Men Husband Boyfriend DIY Handyman

GREAT SUITABILITY: Universal Socket holder Wrench Set suitable for standard ¼ to ¾ metric 7mm to 19mm nuts, bolts, and screws..
HIGH QUALITY: Socket Wrench Tools Set is a multi-functional tool, made from top-quality chrome tungsten steel, this tool is durable, easy to use and a great addition to the toolbox to carry out those DIY tasks quickly and easily..
UNIQUE DESIGN: Honeycomb design in which each strut can independently move to the required angle to complete the task at hand..
WIDELY USE: Universal Super Socket can be used in most electric drills, ratchet spanners, and screwdrivers. The exceptional design can grasp the hex nut, wing nuts, screw eye, lag screws, hook, tension screw and bolt head, etc. Unscrew any bolt, nut, and other fasteners with ease..
GIFT IDEAS: Super Socket Wrench set is the best small handy gadget multi-tool gift set for Men, Dad, Partner, and father¡¯s day which can be used to complete DIY tasks around the home or workshop..

Check Stock

WORKPRO 1/4-inch Magnetic Socket Organizer Set, 2-Piece SAE & Metric Socket Holders, Holds 52 Standard and Deep Sockets for Tool Box, Tool Carts (Sockets Not Included)

Powerful Magnetic to Store Sockets Anywhere: Magnetic socket organizer keeps your sockets neatly stored in drawers or mounted on the side of a tool cart. The sturdy ferrite magnet base has a strong magnetic force to keep your socket in the tray and secure the tray to any ferromagnetic surface..
High Capacity & Clear Specifications: The WORKPRO Magnetic Socket Organizers accommodate both SAE and metric sockets, and can store up to 52 metric and SAE sockets (4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8" ). Bring all the sockets together in one organizer for efficient and orderly work..
Scratch-Free Mounting: Choose this magnetic socket organizer to protect other items in your garage or tool room from fraying with the storage sleeve. The material of PP+PVC soft magnet can avoid scratches to the greatest extent, and the magnetic base with rubber at the bottom will not scratch any of your tool surfaces..

Check Stock

VMS RACING 99-05 Light Weight Billet Aluminum Crankshaft CRANK PULLEY Compatible with Mazda Miata MX5 1999-2005 1.8L BP-4W Engines ONLY OEM SIZE (uses same belts)

Function: This crank pulley tool is used to maintain the harmonic damper pulley position while removing/installing the pulley bolt.
Feature: Used with a 1/2inch breaker bar or ratchet, this crank pulley removal tool prevents the harmonic damper pulley from rotating while you're removing and setting the final torque specification on the pulley bolt..
Design: This 50 mm crank pulley tool socket designed with a hexagonal shape with a hole in the center of the tool that allows the use of a socket and extension to help loosen or tighten the pulley bolt..
Compatibility: This crankshaft pulley wrench holder tool compatible for Honda (most) and Acura engines..
Material: Made of hardened chrome molybdenum steel with great durability to long-lasting service your engine..

Check Stock