Best Socket Type Meter

Upgraded Watt Meter Power Meter Plug Home Electricity Usage Monitor, Electrical Usage Monitor Consumption, Energy Voltage Amps Kill Meter Tester with Backlight, Overload Protection, 7 Modes Display

• ...verload power is 3680W and is adjustable from 0 to 3680W. In general, you need to set the overload power to 1800W before using. Just press the "function" button for more than 3 seconds to enter the setting..
• 【Data Memory Function】: The wattage meter will record your power consumption data when you remove it from socket, or remove appliances from the electricity monitor. You can directly see the last data when you use it next time. This function can also automatically save the data when there is a sudden power failure..
• 【100% SATISFACTION】: Our watt meter power analyzer is ideal for monitoring the electricity usage of your home appliances, controlling your power consumption, and saving your money. Your best choice for voltage meter, kilowatt meter, current meter and electricity meter. If you have any concerns with the electrical meter socket you received, you can contact us to get 100% satisfaction..

Aidetek Electrician Kit Mastech Ms5902 Ms8233b Ms2008a Ms6906 Clamp Multimeter Tester + Screwdriver + flashlight + Wrench + 3 pliers + tool bag

• MS8233B:The Mastech MS8233B is a manual 19-range fully featured digital multimeter..
• MS2008A:ACV DCV AC clamp meter auto-manual range resitance diode data hold auto power off backlight.
• MS5902: disconnect switch detector Breaker convenient search function to quickly find.
• Test function tripod socket socket connection status LED display.
• MS6906: MS6906 LCDSCANNER TESTER METER Metal stud pipe Wooden pillar AC voltage detector Wooden.

ELING Warranted MPH GPS Speedometer Odometer 160MPH for Car Motorcycle Tractor Truck with Backlight 85mm 12V/24V

• Cut an 85mm (3 3/8″) hole in the panel and allow a clearance of 70mm (2 3/4”) behind the panel to fit the gauge. Put the gauge in the hole. Using M4 nut and C type bracket to seal up the gauge..
• For the GPS antenna, you should securely fasten it in the flat position, black side upwards, preferably outside (or inside front windscreen) so that it has a clear view of the sky to pick up satellite signal. Connect the antenna cable to socket in the back of the gauge. And do not cut cable..
• It takes about 30 seconds to get signal in the first time, but less than 3 seconds after that. It gets quicker under a clear view of the sky. Sometimes if signal is missing, pls. reconnect all wires and restart it..
• It shows current speed and odometer(cannot be reset), no trip meter. If you also need trip meter, pls. search for ASIN B07KPHDFDB, B07KPHC1ML or B07KPG7XT3.
• 9-32VDC(12VDC/24VDC) Working Voltage, Red Backlight, 1 year Warranty.

Plug-in Kilowatt Electricity Usage Monitor Electrical Power Consumption Watt Meter Tester

• 【Electricity Usage Monitor, Extension Cord】you can virtually monitor standby or working power dissipation of all your electronics. Monitor which appliances are the high cost of energy. save energy, money, Reduce CO₂emissions, environmental friendly,etc.electrical usage monitor.
• 【Upgrade Blue Backlit LCD Display】The digital large backlit LCD display screen is 180° full wide view clear visible, make you easy to read and record the data, especially in the darkness.power consumption meter.
• 【Overload Protection】 When the whole power exceeds the rated power 1650W of monitor, LCD will display.watt plug meter.
• 【Various Parameters Measurement】CO₂ Emissions(CO₂/KG), Power(W), Energy (KWh), Voltage/Hertz, Amps/Hertz, Power Factor, Minimum power and Maximum power, 8 modes for your choice.kilowatt meter.
• 【Data Hold Function】Electricity Usage Monitor will save the last datas when you remove the appliance from power meter or remove the power meter from the socket.
• If you're not satisfied with it, please feel free to contact, We take full responsibility for product quality.plug in amp meter.

ELING Universal MPH GPS Speedometer Odometer 160MPH for Car Motorcycle Tractor Truck with Backlight 85mm 12V/24V

• Cut an 85mm (3 3/8") hole in the panel and allow a clearance of 70mm (2 3/4”) behind the panel to fit the gauge. Put the gauge in the hole. Using M4 nut and C type bracket to seal up the gauge..
• For the GPS antenna, you should securely fasten it in the flat position, black side upwards, preferably outside (or inside front windscreen) so that it has a clear view of the sky to pick up satellite signal. Connect the antenna cable to socket in the back of the gauge. And do not cut cable..
• It takes about 30 seconds to get signal in the first time, but less than 3 seconds after that. It gets quicker under a clear view of the sky. Sometimes if signal is missing, pls. reconnect all wires and restart it..
• It shows current speed and odometer(cannot be reset), no trip meter. If you also need trip meter, pls. search for ASIN B07KPHDFDB, B07KPHC1ML or B07KPG7XT3.
• Red Backlight, 12VDC/24VDC Working Voltage, 1 year Warranty, 100% waterproof and anti-fogging protection.

Vibration Meter - Digital Precision Split Type Meter Tester HT-1201 Sensor Gauge with LCD Backlight Analyzer Acceleration Velocity Displacement Measurement for Moving Mach

• 【LCD Display】This Digital Precision Split Type Vibration Meter Tester has three and a half digit backlight display.LCD displays measurement result and conditions directly.It can measure the environment temperature with 2 temperature units (℃ and ℉).The default state after power on is acceleration measurement unit (m/s2). Press ▼ key to switch to (mm/s) measurement unit or displacement measurement unit (mm) At the time of measurement. - salinr.
• 【Widely Used】The product adopts piezoelectric type acceleration sensor and is suitable for measurement of conventional vibration of mechanical equipment. It can measure the vibration speed, acceleration, displacement and is widely used in mechanical manufacturing, electric power, chemical engineering, space flight and aviation and other fields. - vibration meter.
• 【Vibration Meter Tester】This Digital Precision Split Type Vibration Meter Tester adopts piezoelectric acceleration transducer transfer the vibration signal in to electrical signal, analyze the input signals, It can measure the vibration speed, acceleration, displacement.Automatic power-off time: 4 minutes.Vibration acquisition: piezoceramic accelerometer (shearing type ) - vibration meters.
• 【Easy to Used】The backlight starts automati....

President Richard 10 Meter Ham Radio 50W PEP

OLIGHT PL-2, PL2, PL II Valkyrie 1200 Lumen Rail Mounted Compact Weaponlight with 2 x CR123A Batteries

• QUICK RELEASE MOUNT -1913 and GL Adaptors included.
• DESIGNED FOR : Glock, S&W, Sig Sauer, Springfield, Beretta, Ruger, Heckler & Koch, FN, Taurus.
• 5 Years Warranty . Package Included : PL2 x 1 ,1600mAh CR123A Battery x 2 ,1913 Rail Mount (for 1913 Rail) x 1 ,T6/T8 Socket Head Wrench x 1, Instruction Manual x1,Olight Patch x1Description.
• The light uses two side by side CR123A batteries in common form factor to the industry for a known and comfortable feel. The light features a TIR optic lens providing a 245-meter-long focused beam that is still wide enough to see all around you to eliminate any blind spots in the dark. The heavy duty quick attach and release mounting system allows the light to have a tight hold on any firearm with a 1913 or Glock style rail..
• The ambidextrous switch allows the user to continue to use their preferred grip on the firearm while still being able to activate the switch at a moment's notice in a high-stress situation..
• Light Form Standard hotspot diameter with impressive dist....

HP Compaq SOCKET 775 MOTHERBOARD 441418-001 441449-001 for XW4600 TOWER

Rajnandini Indian Women s Charcoal Heavy Chanderi Unstitched Embroidered Salwar Kameez with Dupatta

• Fabric :: Top - Heavy Chanderi | Bottom - Cotton | Dupatta - Chiffon | Inner - Not Available.
• Color :: Top - Charcoal | Bottom - Charcoal | Dupatta - Pink.
• Top Length- 2.4 Meter | Bottom Length- 2.4 Meter | Dupatta Length- 2.05 Meter.
• Work- Embroidered | Work Type- Heavy Kashmiri Work, Resham Work, Lace Border Dupatta | Type - Unstitched.
• Package Contents : 1 Salwar Kameez with Dupatta.

MECCANIXITY 3.5mm Retro Telephone Handset Telephone Receiver for Microphone Speaker Blue

• This is a retro mobile phone receiver that allows you to be more comfortable when answering calls. More suitable for people who communicate on the phone for a long time.
• The Telephone Handset has 3.5mm Round Socket.
• Handset Size:21x5x6cm/8.27×1.97×2.36″(LxWxH).
• This phone handset has an answer button and a volume button, you can adjust it according to your needs, with a 1-meter extension cable, you can easily answer calls.
• Steps of intallation:1. When there is a call on the mobile phone, use the Telephone Handset plug to point the hand socket.
• Only works with 3-channel 3.5mm audio socket,before purchasing, please confirm the size of plug.

MECCANIXITY 3.5mm Retro Telephone Handset Telephone Receiver for Microphone Speaker Orange

• This is a retro mobile phone receiver that allows you to be more comfortable when answering calls. More suitable for people who communicate on the phone for a long time.
• The Telephone Handset has 3.5mm Round Socket.
• Handset Size:21x5x6cm/8.27x1.97x2.36"(LxWxH).
• This phone handset has an answer button and a volume button, you can adjust it according to your needs, with a 1-meter extension cable, you can easily answer calls.
• Steps of intallation:1. When there is a call on the mobile phone, use the Telephone Handset plug to point the hand socket.
• Only works with 3-channel 3.5mm audio socket,before purchasing, please confirm the size of plug.

Light Transmission Meter Spectrum Transmittance Meter for Testing The Transmission Value of The Mobile Phone Lens

• Type:Lens Transmission Meter, Spectrum Transmission Meter,Light Transmission Meter,Spectrum Transmittance Meter.
• Accuracy: ±2%(Colorless and transparent material).
• PL transmission meter, BL transmission meter, Light Transmittance Meter, Three function in ONE device..
• Self-calibration and auto-calibration, NO need any manual adjustments..
• Simple operation, putting the testing sample in the testing position, PL, BL and VL transmission values of the sample will simultaneously display..