Categories

Best Soft Close Hinge For Toy Box

200N Gas Struts Toy Box Hinges Soft Close Cabinet Hinges Hydraulic Lid Support Hinge Heavy Duty Lift and Up Hinge for Kitchen Cabinets Pack of 2

  • [ What You Get ] -- Package Including 2 Set heavy duty lid support hinges and mounting screws. The soft close hinges overall length is 12.6 Inch,....
  • [ Heavy Duty Lid Support Hinges ] -- These soft close toy box hinge is constructed by premium cold rolled steel and copper core, corrosion resistant....
  • [ Soft Close Stay Hinge ] -- Our Lid support hinge built in hydraulic dampening device, is excellent safety solution for heavy hinged lids, Doors and....
  • [ Widely Used Safety Close Hinge ] -- The soft down lid support can be mounted for right or left hand use, designed to support lids lowing slowly and....
  • [ 100% MONEY-BACK GUARANTEE ] -- If you have any problem about our soft close lid support hinges, please feel free to contact us, we will do our best....
Check Stock

Slow Multiple Hinges Creak on Closet Door with Multiple Opens and Closes

  • KEEP LID STAY OPEN — The lid support hinge holds the lid open until you want to close. Similar purpose of a gas strut but doesn't self lift, stays and supports lid where you want it. It's widely usage as hinges for wooden box, such as toy box hinges,chest hinges, also fit for overhead kitchen cupboard,wardrobe lids too.Perfect for any lids or flaps when soft close lid support is required..
  • DURABLE MATERIAL — Heavy lid hinge, max weight support 50lbs/2pcs.The up-grated version has the advantages of strong bearing capacity,metal connector instead of plastic clip.Made of premium quality zinc alloy with maximum corrosion resistance and durability the chest slow close hinges guarantee high performance..
  • EASY TO INSTALL【 Important：Refer to our install videos ! 】 — The lid closer can be mounted on the left or right side, also used for side-mounting and top-mounting. Upward door open adjustable angle of 75°,90°,110°. It can fit for most lids and allow you to keep your lids stay at any angle. Just mark two drilling holes, and screw each mounting bracket. No need to use the diagram on the package！.
  • ADJUSTABLE TENSION — Adjust the toy box hinges soft close tension with Allen wrench to fit for lids with different weight. After installing the....
Check Stock

Heavy Duty Lid Hing Soft Close, Zishengho Toy Box Hinge for Toy Chest Lid Support Hinge Keep Lid Stay Open Safety for Cabinet Kitchen Wardrobe Toy Chamber Max Support 50lb/2pcs

  • HEAVY DUTY LID HINGE WIDE APPLICATION—The lid hinge support the lids of box, such as toy box, cabinet, wardrobe lids. Good for any lids or flaps when a soft closing motion is required..
  • HOLD LID STAY OPEN--- The toy box hinge will keep the lid open until you want to close. Never worry about having to support lid hinge anymore. Heavy toy chest lid to prevent fingers from getting smashed..
  • MAX SUPPORT 50LB—Lid stay hinge max weight support 50lbs/2pcs, Lid can be installed in the left or right side. Upward door open adjustable angle of 75°,90°,110° by yourself..
  • STABLE MATERIAL-- The metal version has the advantages of strong bearing capacity, Metal connector instead of plastic clip. Made of premium quality zinc alloy with maximum corrosion resistance and durability the lid stay hinges guarantee high performance..
  • EASY INSTALL OF CHEST TOY HINGE– Only following the placement measurements of the instructions, you will install lid stay easily..
Check Stock

Toy Box Hinges Soft Close - Lid Support Hinges Heavy Duty,Soft Close Hinges for Chest Toy Box,Lid Stay Support 50lb/2pcs (APFFSY)

  • KEEP LID STAY OPEN — The lid support hinge holds the lid open until you want to close. Similar purpose of a gas strut but doesn't self lift, stays and supports lid where you want it. It's widely usage as hinges for wooden box, such as toy box hinges,chest hinges, also fit for overhead kitchen cupboard,wardrobe lids too.Perfect for any lids or flaps when soft close lid support is required..
  • DURABLE MATERIAL — Heavy lid hinge, max weight support 50lbs/2pcs.The up-grated version has the advantages of strong bearing capacity,metal connector instead of plastic clip.Made of premium quality zinc alloy with maximum corrosion resistance and durability the chest slow close hinges guarantee high performance..
  • EASY TO INSTALL【 Important：Refer to our install videos ! 】 — The lid closer can be mounted on the left or right side, also used for side-mounting and top-mounting. Upward door open adjustable angle of 75°,90°,110°. It can fit for most lids and allow you to keep your lids stay at any angle. Just mark two drilling holes, and screw each mounting bracket. No need to use the diagram on the package！.
  • ADJUSTABLE TENSION — Adjust the toy box hinges soft close tension with Allen wrench to fit for lids with different weight. After installing the....
Check Stock

Soft Close Lid Support 200N Gas Struts Heavy Duty Hinges Automatic Slow Lowering Gas Springs Hinges for Toy Box Storage Box,30 lb per strut ,2 Packs

  • ►Practical Safe Lid Stay: This hinge use a safety Soft Close design, which will protect your and your kids finger and avoid the noise and startle....
  • ►Material, ZINC ALLOY: The 200N lid support hinges are made of high quality material--Zinc alloy, it is stable, will last for years..
  • ►200N Heavy-Duty, 75-90 degree OPEN ANGLE: Minimum weight support--15lb (per strut), max weight support--30lb(2pcs). The 200N heavy duty gas struts....
  • ►Applications: This soft close lid support hinge can be use for toy box lid support, storage box lid support, cabinet lid support, plywood box lid....
  • ►Easy To Use: Easy to install, comes with 2 pack, screws included in package for installation. And about the adjust the soft close, please tighten....
Check Stock

NAIERDI [4 Pack] Lift Support,Gas Strut,Soft Close Hinges,100N/22lb Gas Spring Lid Support Kitchen Cabinet Hinges Toy Box Hinges Gas Shocks

  • 100N GAS SHOCKS: Bearing weight: 100N / 22lb (Per Strut), 4 struts included. Length (hole center to hole center) :10.63 inch, Travel length: 3.62....
  • SOFT CLOSE HINGES: This lid hinge can help open/close your kitchen overhead cabinets or toy box slowly to prevent from slaming or bumping..
  • STABLE & RUST PROTECTION: Quality hinge head and better piston make lid support bracket work steadily. Copper core and zinc plating prevent it from....
  • APPLICATIONS: This gas spring lift is suitable for various kitchen cabinets, toy box, trunks and rv cabinets and so on..
  • 1 YEAR QUALITY WARRANTY: NAIERDI offers 1 year 100% satisfactory warranty. If there's a product quality issue or installation problems, please feel....
Check Stock

Lid Stay Hinge Soft Close Safety Lid Support Toy Box Hinge 25-50lb for Toy Box Kitchen Cabinet Wardrobe of Top-Upward Opening & Top Flap Doors

  • LID STAY HINGE ROTATE ONE WAY TO LOCK LID OPEN- Soft close hinges will keep your lid open until you push hinge down. Keep the lid stay in place at different angles when the opening angle is larger than 90°. Lid support hinge is suitable for doors of cabinet, toy box, kitchen, wardrobe, storage chest cupboard and so on..
  • SOFT CLOSE SAFETY HINGE -- Excellent safety solution for heavy hinged lids, lids will lower slowly and gently to avoid smashing fingers. Lid will slow the descent when the opening angle is less than 70°..
  • WEIGHT CAPACITY– 25-50lb Lid support hold 12lbs-22lbs/1pc. 2 hinges support 25-50lbs..
  • DURABLE HEAVY DUTY HINGE--Lid Support Hinge is made of zinc alloy, multi-layer electroplating solid process casting, fine workmanship. corrosion resistance and anti-rust durable and practical..
  • EASY TO INSTALL ONLY 5 MINUTE–Each lid hinge can be used for right or left hand mounting, easy to install by following the placement measurements of the instructions..
Check Stock

Toy Box Hinge Soft Close, Lid Stay 105 Degree Open Safety Slow Close Hinges Support Toy Chest for Upward & Top-Opening Flap Doors Pack of 2

  • SLOW & SOFT CLOSE HINGE¡ªLid stay will make door and lid will close slowly and softly to reduce the impact. Which can prevent noise or smashing fingers. Lid stay torsion hinge support toy box lid and kitchen cabinets..
  • DURABLILITY LIDS¡ªMade of high quality alloy and plastic, with strong corrosion resistance and durability. Long lasting and durable..
  • COMPACT U-SHAPE SNAP DESIGN¡ª Hinge allows the lid to open at an max angle of 105 degrees. Special u-shape design is to prevent the case or door from sliding off when opened. Lid let your baby safety and reliable..
  • EASY INSTALLATION¡ªLid support hinge Can be assembled left and right, support weight capacity is 12-22 lbs. Only follow up instruction of soft close hinge, you will make lid work well..
  • WORRY-FREE WARRANTY¡ªWe offer worry-free warranty and friendly customer service within 12 months for your confident purchase. If you are not satisfied with any product, please don¡¯t hesitate to contact us, we will serve you until your satisfaction..
Check Stock

Heavy Duty Hinge with Soft Close 50lb/2pcs Folding Lid Stay Hinge for Cabinet, Kitchen Wardrobe Toy Chamber

  • WIDE USAGE LID SUPPORT HINGE—The lid support hinge support the lids of box, such as toy box, cabinet, closet, wardrobe lids. Perfect for any lids or flaps when a soft closing motion is required , Upward door open adjustable angle of 75°,90°,110° by yourself..
  • KEEP THE LID OPEN — The lid hinge will hold the lid open until you want to close. Never worry about having to support the lid anymore. Heavy toy chest lid to prevent fingers from getting smashed..
  • DURABLE MATERIAL — The up-grated version has the advantages of strong bearing capacity, Metal connector instead of plastic clip. Made of premium quality zinc alloy with maximum corrosion resistance and durability the lid stay hinges guarantee high performance..
  • WEIGHT CAPACITY—Max weight support 50lbs/2 pcs, Lid support hinge can be mounted on the left or right side..
  • EASY TO INSTALL – Only following the placement measurements on the instructions, you can easy to install lid stay. You will get 2pcs lid stays, Allen wrench and exclusive redesign Installation instruction in package..
Check Stock

Lid Support Hinge Heavy Duty Soft Close 44lb Gas Spring with Soft Close Support Heavy Drop Lids for Soft Close Pack of 2

  • STURDY LID HINGE WITH SOFT CLOSE—The lid support hinge heavy duty is made of cold-rolled steel in Satin Nickel, and sturdy load-bearing material....
  • MAX SUPPORT 60lb---Gas strut fit most of the lids of box which weight of your lid: 30lb-60lb and with a 9 inch clearance.
  • GENTLY CLOSING HEAVY DUTY LID--Pressure: 200N/30lb (per Strut), Max Weight Support--60lb/2pcs. Based on steel cylinder construction, The hinge is easy....
  • SAFETY LID HINGE WIDELY USAGE---Lid stay designed to support lids of box, such as toy box, heavy bench lid, blanket chest, The hinge will slowly drop....
  • EASY TO INSTALL—Only install the screws and one screwdriver, it will take only 3 minutes. Comes with 2 pack, screws included in package for....
Check Stock

Heavy Duty Lid Support Hinges Soft Close Folding Lid Stay Hinge, Keep Lid Hinge Open, Perfect for Cabinet, Kitchen, Wardrobe Toy Chamber Max Support 50lb/2pcs

  • LID SUPPORT HINGE USAGE—The lid support hinge support the lids of box, such as toy box, cabinet, closet, wardrobe lids. Perfect for any lids or flaps when a soft closing motion is required..
  • KEEP THE LID OPEN— The lid hinge will hold the lid open until you want to close. Never worry about having to support lid hinge anymore. Heavy toy chest lid to prevent fingers from getting smashed..
  • WEIGHT CAPACITY 50LB—Lid stay max weight support 50lbs/2pcs, Lid support hinge can be mounted on the left or right side. , Upward door open adjustable angle of 75°,90°,110° by yourself..
  • DURABLE MATERIAL — The up-grated version has the advantages of strong bearing capacity, Metal connector instead of plastic clip. Made of premium quality zinc alloy with maximum corrosion resistance and durability the lid stay hinges guarantee high performance..
  • EASY TO INSTALL – Only following the placement measurements on the instructions, you can easy to install lid stay. Allen wrench and exclusive redesign Installation instruction in package..
Check Stock

Case Compatible with Toy Figures (Case Only)

  • Large capacity box for toy chase toys - Toy box specially designed for toy figures, organize and store a large number of small collection for toys for children. External toy box size: 14*10*1.57inch. (Only Case, Toys Not Included).
  • Removable partition - The partition inside the toy box for toy movie toys figurines is detachable. You can adjust the size of the partition as needed to customize the for toy space..
  • High quality material - Excellent PVC material, durable, waterproof and dustproof, protect your favorite for toy. Transparent material clearly displays your for toy, smooth edges, no scratching, child-friendly..
  • Sophisticated design - Case for toy figures compact and light, convenient handle design, easy to carry, suitable for going out, traveling, camping etc. Enjoy for toy fun anytime and anywhere, buckle easy to open and close, hinge hard to break..
  • Multifunctional usage - Toy Case can not only store for toy movie toys, but also can hold jewelry, watches, bead and other collectibles, meet your other needs..
Check Stock

Jiozermi 4 Pack Folding Lid Support Hinge Toy Box Hinges with Soft Close Heavy Duty Lid Stay Hinges Soft Drop Lid Hinge for Cabinet Cupboard Wardrobe & Toy Box 40lb/2pcs

  • 【Durable Material】: Toy Box Hinges are made of premium zinc alloy, which won’t corrosion, break and will last longer. It guarantee high....
  • 【Adjustable Tension】: The support hinges are fully adjustable for different weight by turning the screw in the middle of the arms to set up....
  • 【Soft Close】: If you want the hinge soft-closing function to work perfectly, the supporting force of the hinge cannot be greater than 40 pounds....
  • 【Random Stay】: The hinge allows the lid to remain open at 75°, 90° and 110° without time limit. When the lid remains open, it will not close....
  • 【100% Happy Customers】: Jiozermi feel confident that you'll love our product, that we'll give your money back if you're not thrilled with your....
Check Stock