Valve Core Removal Tool Set,40Pcs Copper nickel-plated Schrader Valve Cores ,20Pcs O-ring Seal Valve Stem Caps, 3 Pieces Dual Single Head Valve Core Remover Tool Tire Repair Tools
- Package Include : 40Pcs Copper nickel-plated schrader valve cores,20Pcs with rubber-ring Seal valve stem caps,2 x Single Head Valve Core Remover,1 x Dual Head Valve Core Remover Tool.
- Valve Cores: Manufacture of valve cores is fully automated, and all Schrader valve cores are 100% leak-tested. Our fully automated manufacturing allows us to offer zero-defect products.Use of nickel-plated cores prevent galvanic corrosion..
- Valve Tools: Handy tool designed to easily tighten or remove valve cores on bicycles, cars, trunks,and any other air filled tires..
- Valve Caps: Airtight, Leakproof Seal –tire valve caps feature rubber O-rings that create a tighter, more effective seal, so there’s no air leaking on long, tough drives..
- These schrader valve cores is used in any car, truck, motorcycle, bicycle, ATV,and more..
Check StockBrian Tooley Racing BTR LS Valve Seal Kit with Install tool 4.8 5.3 5.7 6.0 6.2 7.0
- Brian Tooley Racing LS Valve Seal Kit, 8 Black Intake and 8 Black Exhaust Seals.
- LS Valve Stem Seal Kit For Stock Powdered Metal and Bronze Guides.
- Valve Stem Seals Keep Unwanted Oil From Entering the Combustion Chamber.
Check StockShift Rite Transmissions replacement for 4L80E 1994-1996 Updated Transmission Valvebody MT1 Shift Rite 4L80E
- This TCC regulator apply valve kit with a hard-anodized aluminum valve with PTFE seal prevents valve bore related problems..
- Sonnax offers a replacement TCC regulator apply valve kit 34994-01K that will prevent valve-bore related problems..
- Hard-anodized aluminum valve incorporates a PTFE seal at the main wear area of the bore to prevent oil loss..
- The valve spool land at the spring end has been lengthened to provide greater bore-to-valve surface contact, thus further preventing leakage..
- The valve spool has annular grooves to help center the valve in the bore..
Check Stockuxcell Solenoid Valve Water Inlet Seal Ring Gasket Normally Closed Seals Sealant Kits Accessories 1/2‘’ Thread
- Advantage: If the seal ring is used for too long, it will naturally erode, then lose its function, or leak oil due to its poor function. Replace the new seal ring to make the solenoid valve work normally..
- Applicable to the normally closed inlet valve and drain valve..
- Total Size: 9.5x26mm/0.37‘’x1.02''(HxD).
- Installation angle: Right Angle (90 degrees).
- Package:1 x Solenoid Valve Water Inlet Seal Ring.
Check StockCASTNOO for LS Valve Seal Installation Tool 2 piece set 4.8 5.3 5.7 6.0 6.2 Springs Suitable for LS Racing
- ☞Function: A spring positioner is required. When the bronze rail is separated, the LS valve stem seal can prevent unnecessary oil from entering the combustion chamber..
- ☞Installation: The operation is simple and convenient, and the valve seal can be easily installed when replacing the spring..
- ☞Application: The valve seal installation tool can be used for stock powder metal and bronze rails..
- ☞Protector: This tool allows you to slowly press the seal without damaging the seal..
- ☞Service quality:100% service guarantee, if you encounter any problems, please contact us in time, we will deal with you as soon as possible..
Check StockReef Tourer Adult Single-Window Mask & Snorkel Combo Set White
- WIDE ULTRA CLEAR VIEWING: The crystal-clear tempered glass lens is scratch resistant, has safety impact protection, provides superior clarity, color, light transmission. Enjoy unobstructed views of the underwater world.
- SUPER SOFT COMFORT FIT: The low volume double seal mask skirt is made from the highest quality silicone, fitting many different faces maintaining water-tight seal. Reduced pressure on your face prevents water from leaking in. Perfect for diving/snorkeling.
- SEMI-DRY SNORKEL w/SPLASH GUARD & PURGE VALVE: This snorkel features a splash guard to reduce water intake for easy breathing, a food-grade silicone mouthpiece, soft & flexible to avoid jaw fatigue, & a purge valve to easily expel residual water.
- SEMI-DRY TOP: The semi-dry top functions as a splash guard. It helps to prevent water from entering your snorkel through the top opening. This is achieved with vents and covers that angle & direct the water away from entering through the snorkel opening.
Check StockPropane Torch Weed Burner, Weed Torch High Output 700,000 BTU, with Turbo Trigger Push Button Igniter (Piezo Electric Ignition) Heavy Duty Multifunctional Burner (CSA CERTIFIED)
- BRASS VALVE CONSTRUCTION and valve spool designed for use with standard size 20lb propane tanks (tank not included). Wand comes with a flow valve and turbo-blast trigger to adjust. ERGONOMICALLY DESIGNED GRIP Deluxe handle for increased comfort in use.
- Our weed burner comes with a valve seal ring manufactured in Germany and a 6.5 FT hose. WORKING PSI: 350 lbs. SOFT-NOSE P.O.L SAFETY VALVE DESIGN- Reverse thread POL safety valve (loose by turning right, tight by turning left). Contains internal safety mechanisms that restricts 95% of propane flow,in case of leakage.Soft nose P.O.L valve fitting connect to any STANDARD propane tank with an OPD valve(By cCSAus CERTIFIED).
- Piezo electric ignition to ensure safety, heats-up to over 3000° F with ease, 700,000 BTU of maximum heat output.
- Undergoes strict quality control before delivery to guarantee safety during use.
- MULTIPURPOSE: Burn weeds and stumps, melt snow, sear meat or fish, light fires, solder, do wood grain burning, soften asphalt, remove paint from non-flammable surfaces and more with this propane torch.
- TRUSTED QUALITY AND 100% MONEY BACK. We provides a return policy against defects in material and workmanship.
Check StockKenda Klever A/T KR28 All-Terrain Radial Tire – 215/85R16 115E
- (Set of FOUR caps) Muzzys Inflate Through High Pressure Valve Stem Caps.
- Made in the USA! Commonly used for Commercial trucks, RV’s, Trailers and Semi’s but can used on anything with a valve stem..
- Valve has two seals and is protected by a solid, all metal housing with a durable, high-temperature- resistant rubber o-ring inside. Safety feature causes seal to tighten to prevent air loss in case the valve fails..
- Double Seal High Pressure Inflate through Valve cap designed for heavy duty and high efficiency use. Gauge and inflate valve extensions directly through the cap..
- Replaces any standard valve stem cap as well as V2B and DS-1..
Check StockAUTOKAY New 4PCS 6HP19 6HP21 Valve Body to Case Sleeve Seal Kit for BMW
- Interchange Part Number:24107536339 / 24107536340 / 2410753641,24347588759 / 24347588725.
- Fit for :2 - Seal Valve Body to Trans Housing (31.2 mm) - ZF - 24107536339.
- 1 - Seal Valve Body to Trans Housing (35.5 mm) - ZF - 24107536340.
- Please check our photos and make sure the part shown looks identical to your stock one.
- Package List:6HP19 6HP21 VALVE BODY TO CASE SLEEVE SEAL KIT.
Check StockRK34-975XL Backflow Preventer Repair Kit -3/4 1 Complete Repair Kit with Springs
- Contains instructions, easy to repair, effectively solve the problem of water leakage..
- Compatible with 3/4-1" 975XL and 975XL2 Reduced Pressure Backflow Preventer..
- Contains: (1) O-ring for relief valve stem, (1) #1 check spring, (1) #2 seal rings, (1) relief valve seal ring, (1) diaphragm, (2) O-rings for check....
- Note: Please clean up the debris in the pressure reducing valve during installation to avoid water leakage caused by inability to seal..
Check StockAtlantis Whirlpools 6060C Cascade 60 x 60 Corner Soaking Bathtub
- Orange preformed seals are made of good quality waterproofing material.Covered with fixed flannel, the seals are effectively waterproof and wear resistant, preventing corners from leaking or corroded by wet surroundings. Random color:Orange/Yellow/Blue.
- With right angle design,the waterproof shower corners can be fit seamlessly to the corner of the bathroom and the bathtub.Don't need to cut the product, saving your time and energy on installation..
- Preformed seals made of waterproof membranes and protect moisture-sensitive backing panels at the mixing valve. Ensures a fully water-tight seal preventing leaks..
- The opening diameter of the mixing valve seal is about 4-1/2 inches. The opening of pipe seal is about 3/4 inches.The correct size help the seals tightly to pipe penetrations..
- Easy to install: the valve seal and pipe seal can be fit the shower pipe or bathtub outlet well and fixed with the thin-set mortar.It's very convenient and quick to install. Note: ① Random Color ②For environmental reasons, we decided to simplify the packaging. Phasing out paper packaging..
Check Stock16 Pack Double Seal Valve Stem Cap Inflate Tire Valve Caps Flow Through Tires Air Cap for High Pressure Truck Car RV Semi Bus Tires
- Serve You for a Long Time: these valve stem caps for truck tires are mainly made of quality copper, sturdy and firm, will not break or deform easily,....
- Saving Your Time and Energy: this inflate through valve stem cap can help you inflate, deflate and gauge your tires without taking the cap off, making....
- Versatile Applicable Occasion: the double seal valve cap can be widely applied on various transportation facilities, such as car, van, truck, SUV, RV,....
- Practical Double Seal Design: these valve cap extenders features double seal design, with nice sealing performance, which can keep away from air loss....
- Adequate Quantity to Share with Others: there are 16 pieces of flow through valve stem tire caps in the package, adequate quantity can meet your daily....
Check Stock4 Pack Flush Valve Seal Gasket Replacement Compatible with Mansfield 210 and 211, Toilet Flush Valve Replacement Kit Red RV Toilet Seal Compatible with Mansfield 210 and 211
- Suitable for: these toilet tank gaskets are suitable for Mansfield models 210 and 211 series.
- You will get 4 pieces toilet seal replacement in red color.
- Enough quantity can reduce the number of purchases, protect your home life and meet your demands.
- Proper Size: toilet flush valve seal measures about 8.1 x 8.5 x 0.16 cm/ 2-1/8 x 3-1/8 x 1/16 inch.
- Suitable size fits well for most toilet, please check the size before ordering.
- Quality Material: the toilet valve seals are made of rubber, with nice deformability and corrosion resistance, which can prolong the service life of the product and help your toilet work better.
- Easy to Install: installation dose not need complicated process, the valve seal repair kit can be installed easily with simple steps, please see the installation tutorial below for details.
- Solve Your Troubles: the toilet valve seal replacement is to solve the problem of excessive flushing sound and too small flushing volume of your toilet, which has caused trouble to your life.
- The existence of these toilet seal parts is to solve your troubles and make your home life happy and easy.
Check Stock