Categories

Best Soft Sealing Gate Valve

4 Sets Water Spigot Lock, Gate Valve Lockout Device with Safety Padlock,1-2.5" Diameter Valve Handles Faucet Locks Outdoor for Gas Water Spigot Petroleum

  • ...with 4 pieces of outdoor faucet locks, and 4 pieces of red combination locks.
  • They are designed in red color, highly visible and eye catching, preventing others from using water pipes without permission, and don't worry about the water being stolen.
  • Suitable Size: our gate valve lockout device is suitable for gate valve handle with a diameter of 1 to 2-1/2 inch (25 mm to 64 mm), and compatible with padlock shackles up to 0.39 inch outside diameter.
  • Please check the size information carefully before purchasing.
  • Security Design: the outdoor faucet handle lock features a hollow circular housing for surrounding the gate valve handle, combined with a combination lock, to help prevent the valve from opening during maintenance and repair.
  • Durable material: the gate valve lock is made of ABS, impact resistant and can withstand rough and harsh weather without breaking, temperature range from minus 46 degrees Celsius to 183 degrees Celsius (minus 115 degrees Fahrenheit to 361 degrees Fahrenheit).
  • The padlock combination red is made of zinc alloy, which is waterproof and rustproof, and you can set safe codes conveniently with the four....
Check Stock

6-Pack Valve Stem Extenders, Mellbree 45 Degree 90 Degree 135 Degree Schrader Tire Valve Extension Compatible for Dual Wheels Passenger Cars, RV, Stroller, Bicycles, Motorcycles and Trailers

  • ...bility to pump or check air pressure due to insufficient space between the valve and the spokes, or the inconvenient position and angle of the valve. Due to the built-in valve core, they can allow inflation and deflation, which is convenient and quick. Be sure to tighten the thread when using it, otherwise the best sealing effect cannot be achieved..
  • The tire valve extension joint is made of brass, the surface is chrome-plated, the chrome-plated layer has higher hardness, better heat resistance, and is not easy to rust. Equipped with rubber sealing ring and sealing cover, durable. The bottom of the extension piece rotates freely, which is easy to operate, convenient and efficient..
  • Prevent air leakage! 1. Install the valve angle extension on the valve core, and be sure to tighten the thread of the rotating part so that there is no air leakage. 2. When you are adjusting the angle, you rotate the valve extension. After the angle adjustment is over, you must tighten the rotating thread to the maximum. 3. The threaded head on the valve extenders is screwed on the existing valve stem, and the included end cap replaces the existing valve stem cover..
  • Our valve core adapters are equipped with rubber sealing rings and sealing caps to ensure air tightness withou....
Check Stock

15x Heavy Duty Lockout Hasps 1.5inch Tagout Kit Safty Clamp Red

  • 【Save Water Bill】Are you worried about someone accessing your water without authorization? Well, Gate Valve Lock to solve your problem. The hollow circular housing fits perfectly over the handle of the faucet, insert a padlock and lock it, no more stealing water! And prevent others from using my water pipe.（Please confirm the size of the faucet and the product before purchasing to ensure that the product fits your faucet perfectly.).
  • 【Well Built】Our valve locks are made of ABS, an engineering material that is impact resistant and can withstand rough and harsh environments without cracking. When locked, the device is enclosed in the valve handwheel and can rotate freely to prevent the handwheel from opening accidentally..
  • 【Reliable Fit】Suitable for 1 to 2-1/2 inch diameter gate valve handle with up to 3/4 Inch Diameter Stems, can accommodate padlock shackle with max 3/8 inch outside diameter..
  • 【Bright and easy to follow】1 set of 2 red gate valve locks. Highly visible and eye-catching, no longer worry about being stolen water. (Note: locks and keys are not included, please purchase your own if needed.).
  • 【Application】It is suitable for outdoor faucets and used in combination with padlocks to help protect against valve opening during ma....
Check Stock

R134A Self-Sealing Can Tap with Right Hand Thread, R134A Valve Tool Bottle Opener with 1/2" Female R-H Thread and 1/4’’ SAE Male Connector, Fits for R134A Automotive Air Conditioning Charging

  • 【COMPATIBILITY】 -- This R134A self-sealing dispensing valve bottle opener fits for a self sealing 1/2" right hand thread for use with most R134A self-sealing/reusable designed cans. Please note there are two kinds for self-sealing can taps, R134A and R1234YF can tap, R134A self-sealing can tap with right hand threaded, but R1234YF self-sealing can tap with left hand threaded. Please check your can before purchase..
  • 【THREAD 】 -- R134A valve can tap connecting thread 1/4’’ SAE Male, interface thread 1/2’’ right hand female thread..
  • 【EASY INSTALLATION】 -- Aupoko R134A self-sealing valve can tap is designed with safety check valve, and easy to open R134a self-sealing can with valve to turn off to reserve for future use..
  • 【PREMIUM QUALITY】 -- The R134A self sealing can adapter is made of aluminum alloy with heavy-duty construction, with gasket protected to prevent leaks for durable use..
  • 【1 YEAR WARRANTY】 -- Order R134A self sealing can tap from Aupoko, we offer 1 YEAR WARRANTY, true worry-free shopping experience. If this part ever fails please contact us for a replacement or refund in the limited time..
Check Stock

1 Inch Ball Valve, Premium 304 Stainless Steel Full Port Forged NPT Ball Valve for Water Oil and Gas with Long Handle Shut Off Switch, 1000 WOG ( 1 Piece, FNPT to FNPT )

  • ...h opens and closes quickly. It only needs to rotate 90° from fully open to fully closed, which is convenient for quick control. When the handle is parallel to the pipe body, it is in an open state, and when it is vertical, it is in a closed state, so it is more convenient to observe whether the valve is open..
  • Good sealing: It has two sealing surfaces with good sealing performance and can achieve complete sealing. When fully open or fully closed, the sealing surface of the ball and the valve seat is isolated from the medium, and the medium will not cause erosion of the valve sealing surface when the medium passes..
  • Widely used: Ball valves are widely used in gardens, water pumps, corner rainwater tanks, external taps, rainwater connections with buckets, rainwater collectors, water pipes, etc. Also can be used for mechanical equipment, industrial equipment, water supply and drainage equipment..
Check Stock

3/4\ Ball Valve, 1 Pack Male NPT (MNPT) X Female NPT (FNPT) Thread,Stainless Steel Shut-Off Valve for Water,Oil and Gas (3/4 inch, 1 pack)

  • Ball Valve：Male NPT (MNPT) X Female NPT (FNPT) screw thread connections,1,000 WOG (PSI) full port heavy duty ball valve is made of 304 stainless steel,safer and stronger,anti-corrosion,long lifetime..
  • Good Sealing：KAPUNOS ball valve has two sealing surfaces with good sealing performance,it can achieve complete sealing..
  • Convenient Operation：KAPUNOS high pressure ball valve has a comfortable operating handle,which opens and closes quickly,It only needs to rotate 90° from fully open to fully closed, which is convenient for quick control. When the handle is parallel to the pipe body, it is in an open state, and when it is vertical, it is in a closed state, so it is more convenient to observe whether the valve is open..
  • Widely Used：Ball valves are widely used in gardens, water pumps, corner rainwater tanks, external taps, rainwater connections with buckets, rainwater collectors, water pipes, etc. Also can be used for mechanical equipment, industrial equipment, water supply and drainage equipment..
  • Suitable for Media：The high-quality 304 stainless steel ball valve is suitable for water, sea water, air, oil and steam media.Since the ball valve has wiping properties during opening and closing, it can be used in media with suspended solid particles..
Check Stock

Universal Replacement Floater and Sealer for Power Pressure Cookers/Relief Jigger Valve for Pressure Cookers Safe Regulator Weight Pressure Control 80KPA 1.5 Inch

  • Floater Valve/Sealing Ring/ Jigger Valve is are essential for pressure cooker to work Under normal situation,floater valve inserts into the lid from outside to inside. The floater valve locks the floater from inside, keeping the floater valve in place.
  • The sealing ring is often washed off, leaving the floater valve loose and the pressure cooker unusable，This floater valve and sealing ring set fits the lids of almost all pressure cooker universally.
  • This floater and sealer set fits many models of the Power Pressure Cookers including but not limiting to XL (6 & 8 quarts), YBD60-100, PPC780, PPC770, PPC790 ,CSG60, IP-CSG50, IP-LUX60 and IP-LUX50. It does not fit IP-DUO50 or IP-DUO60.
  • Pressure Cooker Jigger Valve External Size (Approx) : 2.6 x 3.8cm/1″x 1.5″(D*H)，Bottom Hole Dia : 10mm / 0.4″，Weight : 127g.
  • Please check the pictures to see the sizes of the set before buying.
Check Stock

GOVALVE Heavy Duty Gate Valve - 1\ NPT Stainless Steel Female x Female Thread Rotary Sluice Valve with Wheel Handle 200WOG For Water Oil Gas

  • MATERIAL: Gate valve is made of 304 stainless steel. Anti-rust and anti-corrosion, sturdy and durable for long time use..
  • FULL PORT: The full bore will not limit the flow and has small resistance to the flow..
  • WHEEL HANDLE: Easy to operate. Whether opened or closed, the movement direction of the gate is perpendicular to the medium flow direction..
  • NPT THREAD: Ensure gate valve tightness and good compatibility with other material thread pipes..
Check Stock

R134A Self Sealing Can Tap Valve Refrigerant Dispenser Tool with Tank Adapter and Valve Core Remover for Air Conditioner Manifold Freon Charging Hose

  • 【R134A SELF SEALING CAN TAP 】This R134a self sealing can tap valve only fits for self sealing cans（such as Walmart sells 12oz Self-Sealing Container） with 1/2'' ACME thread and this 134a self sealing can tap cannot be used on puncture style cans. Please be careful when you buy..
  • 【WIDE COMPATIBILITY】This R134a self sealing can tap can directly connect 1/4" SAE (R12 R22) female fitting AC charging hose and through the tank adapter （ 1/4" SAE female x 1/2" ACME）to connect 1/2" female AC charging hose..
  • 【MATERIAL】Both the r134a self sealing can tap and the tank adapter are made of solid premium brass which make them can even work under extreme conditions, features with long-lasting seals to prevent leaking..
  • 【VALVE CORE REMOVER】Our R134A can tap comes with extra automotive high and low pressure side service port valve core removal, dual head with thick and thin heads will fits most models..
  • 【SERVICE】Our QC department do 100% quality inspection on the R134a self sealing can tap before delivery. We will give you a 100% satisfactory solution if the R134a self sealing can tap is defective. Your valuable suggestions and advice will be greatly appreciated by our team..
Check Stock

Boltigen R134A Self Sealing Can Tap Valve Refrigerant Dispenser Tool with Tank Adapter for 1/4 and 1/2-inch AC Freon Charging Hose (1/2 Self Sealing)

  • 【R134A SELF-SEALING CAN TAP 】 Our R134a self sealing can tap valve fits for 12oz R134a self-sealing cans and designs with hand operated valve control.this 134A self sealing can tap can only be used for self-sealing cans with 1/2'' ACME thread, either cannot be used on puncture style cans..
  • 【WIDE COMPATIBILITY】Our r134a self sealing can tap fits self sealing R134a containers（such as 12oz Self-Sealing Container） with ACME threads to directly connect 1/4" SAE (R12 R22) female fitting AC charging hose .Come with R134A can tap refrigerant dispenser and tank adapter, compatible with both 1/4" and 1/2" female fittings ac charging hose..
  • 【TANK ADAPTER】Our R134A car air conditioning tank adapter comes with 1/4" SAE female x 1/2" ACME male flare, connects to R134A manifold..
  • 【PREMIUM QUALITY】Round smooth handle for easy operation. Our R134A refrigerant self-sealing can tap with adapter is made of heavy duty brass to last under extreme conditions for durable using, with screw-on design and safety check valve, even working under extreme conditions, features with long-lasting seals to prevent leaking..
Check Stock

DuraChoice 2\ Brass Gate Valve - 200WOG, FxF NPT

  • Made of high quality brass material, this gate valve is sturdy and durable..
  • The internal fluid path of valve body is straight through which allows fluid to flow in a straight line and the flow resistance is small..
  • It's easier to open and close, because the movement direction of the gate is perpendicular to the flow direction, whether on or off..
  • It is suitable for water, oil, gas, steam, etc..
  • Widely used in mechanical equipment, chemical equipment, industrial equipment, water supply and drainage equipment, pharmaceutical equipment, petrochemical equipment, etc..
Check Stock

Washer 10Pcs Universal Faucet Valve Double Rubber Sealing Gaskets Replacement Parts Plastic Leak Proof Raw Material Free Gaskets Rugged and Durable, Strong Sealing (Color : Red)

  • 10Pcs double rubber sealing gasket without raw material..
  • Made of PVC and rubber, it has excellent toughness, is not easy to deform, and is durable..
  • The double rubber design and the gasket without raw materials ensure good sealing performance and prevent leakage..
  • Easy to install and connect, replace old seals to improve sealing performance..
  • Used with toilet shut-off valve, sink shut-off valve, dishwasher valve and drinking water supply valve..
Check Stock

SUNGATOR Angle Stop Add-A-Tee Valve, 3/8

  • Lead Free Brass: Heath and environment friendly material. Lead free brass for both potable and non-potable water. 3/8" compression inlet x 3/8" compression outlet x 3/8" compression outlet..
  • Wildely Used: Angle stop add-a-tee for adding an outlet on a angle stop valve for a refrigerator, ice maker, water filtration system, dishwasher, second faucet, etc..
  • Durable: Brass for corrosion resistance, high temperature ductility and low magnetic permeability, have a longer using life than iron and iron galvanized products..
  • Better Sealing: Built-in rubber ring for better sealing, a sealing tape included for further improving sealing performance by using on the male thread end..
  • Package Includes: 3/8 Inch Lead Free Add-A-Tee Valve (2 pcs).
Check Stock