Categories

Best Solder Ball Attach Machine

Solder Tip Cleaning Brass Wire 6 packs, Replacement Cleaning Brass Wire for Soldering Station Tip Cleaner

  • SOLDERING IRON TIP CLEANER: Effectively remove iron oxide and solder on the iron tip..
  • IMPROVE EFFICIENCY OF WELDING: Without adding water,avoid iron head cooling,no the outbreak of solder ball,improve the efficiency of welding..
  • ALUMINUM HLODER CASE: Aluminum with strong corrosion resistance..
  • COPPER WIRE BALL: The brass ball contains flux to effectively remove the iron oxide and extend the life of the iron tip..
  • ECO-FRIENDLY: No contamination risk compared to conventional tip tinners.
Check Stock

Soldering Iron Tip Cleaner 4 Pack Non-slip Solder Cleaner with Case Holder No Water Needed Solder Tip Cleaner Soldering Iron Cleaner

  • Solder tip cleaner adopts premium copper material, effectively prevent iron tip oxidation, to prolong tip service life..
  • Our soldering tip cleaner will not reduce the tip temperature when using, to improve your working efficiency greatly..
  • The solder iron tip cleaner adopts ball shell design to prevent residual solder stained your working area..
  • No water needed when using solder cleaner, very convenient to use..
  • Package include 3 pack soldering iron cleaners with 1 holder case, Safe and no risk to use than conventional tip tinners..
Check Stock

Handy Flame Butane Torch – SOL-315.00

  • Attach directly to the fuel canister and start working.
  • Uses an 8 ounce butane canister, found in stores with a camping or outdoor section.
  • Adjustable flame control in a lightweight, compact design.
  • Easy to attach, just push and twist onto the butane canister and you are ready to solder or fuse.
Check Stock

KEYESTUDIO MEGA Prototype Shield V3 Board for Arduino Mega, with 170 Points Breadboard Solderable, Easy to Use, Great for Prototyping Circuit Building Projects

  • Keyestudio MEGA ProtoShield makes it easy to design circuits and solder electronics. All the pads are tinned and easy to solder to..
  • The extra GPIO pin header on the right side is left empty making easier to install one according to the user's preference..
  • Be able to attach a Mini breadboard to make various circuit experiments. You can weld elements on the shield's prototyping area or connect circuits with tiny breadboard..
  • Better than most Arduino proto shields. It would be the best choice for you to use with Arduino MEGA controllers for either solder projects or prototyping..
  • MEGA Protoshield V3 for Arduino with mini breadboard are in good quality and well packed. Nice yellow on black color scheme..
Check Stock

Portable Solder Iron Tip Cleaners Metal Base Holder Station Cleaning Ball with 3 Soldering Cleaning Wire Soft Coiled Copper for Cleaning Soldering Irons Tips

  • √ Ideal Solder choice for soldering tip cleaner —— The high quality copper material, 100% copper cleaning wire, It is smokeless, tasteless, non-toxic, Soft coiled copper tip cleaner can reduce oxide accumulation effectively and prolong soldering iron tip service life.
  • √ No need water, No temperature reduction —— No water required, meaning less chance of oxidation and won't reduce tips temperature, Avoid soldering iron cooling, improve welding efficiency.
  • √ Coiled copper cleaning the solder tip cleaner —— Won't damage your soldering tips, effectively prevent iron tip oxidation, to prolong tip service life.
  • √ Metal material of the solder container base —— The shell house made of iron material, No afraid of the high temperature solder head when soldering.
  • √ with 2 Replacement coiled copper ball cleaners —— Total 3 coiled copper cleaners for this item, 18 grams each / 3 per pack.
Check Stock

350 Pcs Solder Seal Wire Connectors Heat Shrink Butt Connectors Kit Marine Waterproof Wiring Electrical Cable Splice Terminals for Boat Automotive RV Trailer

  • Easy to Use: Heat shrink wire connectors can be connected with just a heat gun, no crimping tool or soldering machine is needed..
  • Waterproof and Insulating: Solder seal wire connectors with low heat solder and hot melt adhesive can produce a perfect seal, which helps to be better waterproof..
  • Wide Applications: Butt connectors are ideal for marine, automotive, trailer and other outdoor applications..
  • High Quality Solder Seal Rings: Use exclusive material in the wire connectors to avoid shrink tubing melting before solder..
  • Package Includes: You will receive 350 pcs waterproof solder wire connectors..
Check Stock

Soldering Tip Cleaner Set Solder Iron Tip Cleaning Wire and Brass Tip Cleaner Kit Include 8 Pieces Brass Wire Cleaner and 1 Piece Ball Shell Holder for Cleaning Solder Irons and Tips (Gold)

  • Nice performance: the soldering iron cleaners don't need cleaning with water, so that will not lower the temperature of the tips.
  • With a dense structure, the brass tip cleaner provides a multi-pointed touch surface for deep cleaning.
  • Quality material: the ball shell base is made of alloy material, durable and safe to withstand working in the heat.
  • Soldering tip cleaning wire ball is made of quality brass, can reduce oxide accumulation, improve work efficiency and prolong the service life of your soldering iron tip.
  • Considerate design: the cleaner holder is designed in the shape of a ball shell to collect the waste of the solder tip.
  • When you clean the solder tip, the dome shell can effectively prevent the tin residues from falling out of the container, which can keep your workbench clean.
  • Package includes: the soldering iron tip cleaner kit comes with 8 pieces of wire-typed ball cleaners and a brass holder, enough to meet your needs for use and replacement.
  • Compact and portable: the brass cleaner holder weighs about 110 g, with about 2.95 inches in height tall and 2.76 inches in width.
  • The weight of the wire brass ball is approx. 0.6 ounces/16 g.
  • With small size and light weight, the soldering tip cleaner kit is easy to carry and store, suitable for vari....
Check Stock

Soldering Station,936 Adjustable-Temp One Hands Soldering Gun Auto Tin Feeding /Send Tin Solder Iron Set for Circuit-Board Welding Repair

  • newacalox 936 60W Soldering Station is a useful Unit and is Perfect for beginners and experts repairing workwear. It will make you happy with its Quality & one-hands operating compared to any Soldering Iron Station in its Class. This Unit takes less than 30s to heat up from 200°C to 500°C (392°F to 932°F)..
  • One-hand operation solder station: You don't need to point your tin wire and tin gun with all your hands again and you won't burn your hands accidentally anymore because of the Automatic tin feeding function. heats up very quickly, which has a comfortable grip and a firm body that offers long-time service. The orange button design can easily take the tin wire from the soldering gun, not stick..
  • Applied Useful Technologies - Clear °C/°F scale, and PID Heat Control Technology. Temperature Calibration applied, A single intuitive knob can help adjust the temperature precisely and, at the same time, do the settings. It’s just good for new players to skilled experts! the top on/off switch can avoid a long time of use, saving energy and ensure safe soldering..
  • Supplied Essential Accessories - 5x different 900m Solder Tips,1x Spool of Lead-free Solder (1.764 oz), 1xclean ball,1x Solder gun Bracket, 2x Tweezer, 1x Solder Sucker, 1x Sponge, 1x User Man....
Check Stock

Soldering Tip Cleaner, Wire-type Soldering Iron Tip Cleaner With Holder, Soft Coiled Brass Tip Cleaner Kit with 4 PCS Solder Tip Cleaning Wire and 1 PC Holder for Cleaning Soldering Irons and Tips

  • A Must Have For Cleaning Soldering Tips:The brass tip cleaner cleans the tip perfectly only need dip your solder iron into this spongy metal mesh. Such cleaners are used for removing solder from the tip’s surface and cleaning the working surfaces from oxidation products, which prolongs the life of the tool..
  • Time Saver:Does a great job of keeping the solder gun tip clean regardless of solder gun temp. Used 6-8 times so far and the coiled brass is still in great shape. A few dabs in this, a touch of flux, and solder away! The soldering iron tip cleaner will save you lots of time..
  • High Quality Material:The best material for these cleaners is high-quality brass and extra-strong stainless steel. A cleaner resembles the ball of spiral-shaped brass fine chips. Brass has a lower density than the solder’s tip coating material but is higher than the oxidation products on the tool surface. It is sufficient to immerse the soldering iron’s tip in the chips to remove the oxidation..
  • Cleaning With This Soldering Iron Tip Cleaner Does Not Require Water: This special cleaner does not reduce the working temperature of the tool. They are made of non-corrosive material and does not require additional time the tool’s reheating..
Check Stock

Yarn Winder Knitting Yarn Ball Winder,Knitting Wool Winder Holder Swift Table Top Hand Operated Winder,Manual Wool Yarn Cone Ball Winder - 180x135x100mm

  • ...organize wound yarn into usable cakes.
  • ➤Efficiently wind the thread into a ball, avoiding the thread from tangling into a ball, so that you can feel comfortable.➤Made of high-quality plastic, light weight, low noise, easy to carry, and can be wound anywhere and anytime according to your needs.➤The winding machine does not need to be assembled and easily attach to any table or countertop without leaving damage.➤It can be used for winding, lace, rope, even beginners easily wind the scarf thread, you can give this job to your children or husband..
  • ➤Manual operation will pass the time when bored, the packaging size is 180 * 135 * 100mm, which is convenient for storing yarn..
  • yarn winder chunky wool wool winder wool yarn for knitting knitting yarn yellow wool knitting yarn wool winder uk cheap wool rowan big wool yarn yarn ball winder Yarn Ball Winder, Knitting Wool Winder Holder, Manual Wool Yarn Cone Ball Winder, Swift Table Top Hand Operated Winder.
Check Stock

MEGA2560 Screw Terminal Block Breakout Module with Aluminum Enclosure, for Arduino MEGA 2560 R3

  • Screw connection will hold tightly.Solder good,holds both stranded and solid copper wires secure.Fits good in circuit board,doesn't twist and break when the screws are tightened,will not lose or slip around.The leads are aligned for a standard breadboard and fit securely.The pins themselves are slim enough to fit through the holes,doesn't destroy the plating on the inside..
  • Won't lead to strip screw heads,broken solder joints or poor connections.Makes good electrical contact,looks good and neat.Not allow the wire to get off-center when inserted.The connector will not melt things when soldered to them.They are not too thick that fit perfectly next to each other on a protoboard.You can jam them in there and they sit parallel..
  • Easy to insert into prototype boards and solder the pins.These connectors work well on PCBs.Can be used on a breadboard power rails if plugged in at an angle.The screw connections can open enough to let a wire enter freely,doesn't make it difficult to enter and tighten the wires.Make it easier to swap out things like simple antennas,low voltage power sources,sensors,ect..
  • Needn't over-torque the screws and they will hold up fine.When you want to move wires,wires come right out with the slightest movement.Great for mounting on or in ....
Check Stock

VPABES 938D Portable Hot Tweezers Mini Soldering Station US Plug for BGA SMD Repairing Tool

  • 【Digital LED Display】 The product adopt microcomputer control,The hot air and soldering iron all are digital LED display the temperature..
  • 【Rework & Soldering】 2 in 1 SMD Hot Air Rework Station and Soldering Iron..
  • 【Solder Station Features】 High power,quick warming-up,Temperature stabilization and is impervious to air,,and long life and low noise. it have inductance in the hadle,it will be quickly to work when you take the handle,when the handle is return to the shelf,the machine will automatic stopage..
  • 【Widely Used】 Designed for soldering or de-soldering SOIC, CHIP, QFP, PLCC, BGA and other temperature sensitive components, essential tool for cell phone repair, laptop repair, or circuit boards soldering..
  • 【20-in-1 Full Kit】 The packing include: 1 * 898D 110V Solder station, 12 * Solder iron tips, 1 * 6in1 BGA tools, 1 * Desoldering pump, 1 * 100g solder wire, 2 * Tweezers, 1 * Soldering iron heater, 1 * Hot air gun heater, 1 * IC puller..
Check Stock

YIHUA 907I Red Grip Replacement Soldering Iron Handpiece/Handle for Yihua 995D+ Rework and Soldering Station

  • The bundle includes: The 939D+ Professional Soldering Station (Pack 2) with the M180 Professional Soldering Work Mat.
  • The 939D+ Pack 2 includes essential accessories: 3 x assorted solder tips, 1 x cleaning sponge, 1 x 50g 0.8mm solder wire, 1 x solder wick, 1 x holder, 1 x Cleaning Kit (brass ball+rosin).
  • The 939D+ Soldering Station: You can select from 392-896°F for your work. The built-in temperature stabilization function keeps the iron at set temperature steadily for your work..
  • 17.32" x 12.20" M180 Work Mat: The heat resistant work mat can help prevent the accidental burning of your work desk. It also comes with component slots and rulers to help you organize your work desk..
  • Quality Assurance: Because you buy directly from the manufacturer, you can enjoy 1-year quality assurance on all our soldering iron/station & rework stations/portable hot air guns. (*consumable product such as soldering iron tips are not covered by the warranty) On top of that, you'll also gain access to our on-demand after sales support on amazon for any troubleshooting/general queries..
Check Stock