Categories

Best Solder Ball Attach System

Soldering Iron Tip Cleaner 4 Pack Non-slip Solder Cleaner with Case Holder No Water Needed Solder Tip Cleaner Soldering Iron Cleaner

  • Solder tip cleaner adopts premium copper material, effectively prevent iron tip oxidation, to prolong tip service life..
  • Our soldering tip cleaner will not reduce the tip temperature when using, to improve your working efficiency greatly..
  • The solder iron tip cleaner adopts ball shell design to prevent residual solder stained your working area..
  • No water needed when using solder cleaner, very convenient to use..
  • Package include 3 pack soldering iron cleaners with 1 holder case, Safe and no risk to use than conventional tip tinners..
Check Stock

Handy Flame Butane Torch – SOL-315.00

  • Attach directly to the fuel canister and start working.
  • Uses an 8 ounce butane canister, found in stores with a camping or outdoor section.
  • Adjustable flame control in a lightweight, compact design.
  • Easy to attach, just push and twist onto the butane canister and you are ready to solder or fuse.
Check Stock

KEYESTUDIO MEGA Prototype Shield V3 Board for Arduino Mega, with 170 Points Breadboard Solderable, Easy to Use, Great for Prototyping Circuit Building Projects

  • Keyestudio MEGA ProtoShield makes it easy to design circuits and solder electronics. All the pads are tinned and easy to solder to..
  • The extra GPIO pin header on the right side is left empty making easier to install one according to the user's preference..
  • Be able to attach a Mini breadboard to make various circuit experiments. You can weld elements on the shield's prototyping area or connect circuits with tiny breadboard..
  • Better than most Arduino proto shields. It would be the best choice for you to use with Arduino MEGA controllers for either solder projects or prototyping..
  • MEGA Protoshield V3 for Arduino with mini breadboard are in good quality and well packed. Nice yellow on black color scheme..
Check Stock

Portable Solder Iron Tip Cleaners Metal Base Holder Station Cleaning Ball with 3 Soldering Cleaning Wire Soft Coiled Copper for Cleaning Soldering Irons Tips

  • √ Ideal Solder choice for soldering tip cleaner —— The high quality copper material, 100% copper cleaning wire, It is smokeless, tasteless, non-toxic, Soft coiled copper tip cleaner can reduce oxide accumulation effectively and prolong soldering iron tip service life.
  • √ No need water, No temperature reduction —— No water required, meaning less chance of oxidation and won't reduce tips temperature, Avoid soldering iron cooling, improve welding efficiency.
  • √ Coiled copper cleaning the solder tip cleaner —— Won't damage your soldering tips, effectively prevent iron tip oxidation, to prolong tip service life.
  • √ Metal material of the solder container base —— The shell house made of iron material, No afraid of the high temperature solder head when soldering.
  • √ with 2 Replacement coiled copper ball cleaners —— Total 3 coiled copper cleaners for this item, 18 grams each / 3 per pack.
Check Stock

Spornia SPG-7 Golf Practice Net - Automatic Ball Return System W/Target Sheet, Two Side Barrier (with Roof)

  • Practice full swing, chipping, and putting with all clubs with real golf balls.
  • Attach included red chipping baskets to practice your short game. Adjust to any desired angle: Top,middle,bottom.
  • Automatic Ball Return System (You only need one ball) and Ball Stopper (Stores over 200 balls) | Golf ball gently rolls straight down after impact without bouncing or touching the floors.
  • Patented Large target sheet that absorbs high ball impact, loud sound, and secures the net. Safely practice on a Large target area (60" x 60" ).
  • Indoor & Outdoor. Portable & Lightweight. Fast & Easy Setup/Breakdown (Less than 30 seconds).
Check Stock

Desoldering Gun, Solder Sucker Desoldering Iron Electric Desoldering Tool with Desoldering Nozzles, Solder Wick, Soldering Tip and Cleaning Pin (Blue)

  • 【Desoldering Gun】No need to operate the soldering iron with one hand and the solder sucker pump with the other any more, our electric desoldering gun combines heating and desoldering functions that ensure you an easy and comfortable way to one-hand operation, and the deflector can reduce the heat from transferring to your hand when using the solder suck. This solder sucker kit will give you a smooth working experience in a time-consuming desoldering project..
  • 【No Jam&Easy to Clean】Compact and lightweight to carry everywhere, non-slip grip to meet a perfect touch, plug and play and no need a soldering station, let this full upgraded desolder kit be your best helper for desoldering work. The powerful heating system and solder extraction design of the desolder gun ensure you desoldering without jam. Cleaning is also quick and easy, just lift and pull out the scrap solder storage tube and clean the solder out completely without mess..
  • 【Perfect Desoldering Tool】 You will get a eletric vacuum desoldering iron, a solder wick, a cleaning sponge, a cleaning Pin, 2 interchangeable diameters (φ1.0mm & φ1.2mm) desoldering nozzles for different sizes of through-hole components, and a solder tip for transforming this electric solder sucker into a ....
Check Stock

Soldering Tip Cleaner Set Solder Iron Tip Cleaning Wire and Brass Tip Cleaner Kit Include 8 Pieces Brass Wire Cleaner and 1 Piece Ball Shell Holder for Cleaning Solder Irons and Tips (Gold)

  • Nice performance: the soldering iron cleaners don't need cleaning with water, so that will not lower the temperature of the tips.
  • With a dense structure, the brass tip cleaner provides a multi-pointed touch surface for deep cleaning.
  • Quality material: the ball shell base is made of alloy material, durable and safe to withstand working in the heat.
  • Soldering tip cleaning wire ball is made of quality brass, can reduce oxide accumulation, improve work efficiency and prolong the service life of your soldering iron tip.
  • Considerate design: the cleaner holder is designed in the shape of a ball shell to collect the waste of the solder tip.
  • When you clean the solder tip, the dome shell can effectively prevent the tin residues from falling out of the container, which can keep your workbench clean.
  • Package includes: the soldering iron tip cleaner kit comes with 8 pieces of wire-typed ball cleaners and a brass holder, enough to meet your needs for use and replacement.
  • Compact and portable: the brass cleaner holder weighs about 110 g, with about 2.95 inches in height tall and 2.76 inches in width.
  • The weight of the wire brass ball is approx. 0.6 ounces/16 g.
  • With small size and light weight, the soldering tip cleaner kit is easy to carry and store, suitable for vari....
Check Stock

2 Pcs 1" Aluminum Ball Clamp Mount for Underwater Diving Light Arms Tray System, Photography Diving Camera

  • Ball clamp underwater is Made of hard coat anodizing aluminium, great the anti-corrosion, durable to use..
  • Standard ball clamp used to attach two arm, base adapters and strobes together..
  • It can rotate 360 degrees,versatile, practical, powerful.
  • This standard ball clamp mount attaches two 1-inch diameter balls. Thicker plates provide the perfect combination of strength and range of motion. Plates are spring-loaded for easy assembly and breakdown of your arm system..
  • 1'' inch Diamter,compatible with RAM ball mount base. Portable.
Check Stock

Kegconnection Kegerator Beer Line Cleaning Kit

  • 8 oz of Brew Clean line cleaner (enough to do about 20 cleanings).
  • Cleaning Bottle with hose and special connector for easy cleaning of your liquid lines.
  • Ball Lifter – lifts the ball on your coupler so the cleaner will flow through. (you need this, many kits don’t have it.).
  • Faucet Wrench – helps remove your faucet and attach cleaning kit to your system, Brush allows deep cleaning of Faucets.
  • Some of the easiest to follow, best written instructions in the industry! Shipping rates shown are for Continental USA only.
Check Stock

Soldering Station,936 Adjustable-Temp One Hands Soldering Gun Auto Tin Feeding /Send Tin Solder Iron Set for Circuit-Board Welding Repair

  • newacalox 936 60W Soldering Station is a useful Unit and is Perfect for beginners and experts repairing workwear. It will make you happy with its Quality & one-hands operating compared to any Soldering Iron Station in its Class. This Unit takes less than 30s to heat up from 200°C to 500°C (392°F to 932°F)..
  • One-hand operation solder station: You don't need to point your tin wire and tin gun with all your hands again and you won't burn your hands accidentally anymore because of the Automatic tin feeding function. heats up very quickly, which has a comfortable grip and a firm body that offers long-time service. The orange button design can easily take the tin wire from the soldering gun, not stick..
  • Applied Useful Technologies - Clear °C/°F scale, and PID Heat Control Technology. Temperature Calibration applied, A single intuitive knob can help adjust the temperature precisely and, at the same time, do the settings. It’s just good for new players to skilled experts! the top on/off switch can avoid a long time of use, saving energy and ensure safe soldering..
  • Supplied Essential Accessories - 5x different 900m Solder Tips,1x Spool of Lead-free Solder (1.764 oz), 1xclean ball,1x Solder gun Bracket, 2x Tweezer, 1x Solder Sucker, 1x Sponge, 1x User Man....
Check Stock

Soldering Tip Cleaner, Wire-type Soldering Iron Tip Cleaner With Holder, Soft Coiled Brass Tip Cleaner Kit with 4 PCS Solder Tip Cleaning Wire and 1 PC Holder for Cleaning Soldering Irons and Tips

  • A Must Have For Cleaning Soldering Tips:The brass tip cleaner cleans the tip perfectly only need dip your solder iron into this spongy metal mesh. Such cleaners are used for removing solder from the tip’s surface and cleaning the working surfaces from oxidation products, which prolongs the life of the tool..
  • Time Saver:Does a great job of keeping the solder gun tip clean regardless of solder gun temp. Used 6-8 times so far and the coiled brass is still in great shape. A few dabs in this, a touch of flux, and solder away! The soldering iron tip cleaner will save you lots of time..
  • High Quality Material:The best material for these cleaners is high-quality brass and extra-strong stainless steel. A cleaner resembles the ball of spiral-shaped brass fine chips. Brass has a lower density than the solder’s tip coating material but is higher than the oxidation products on the tool surface. It is sufficient to immerse the soldering iron’s tip in the chips to remove the oxidation..
  • Cleaning With This Soldering Iron Tip Cleaner Does Not Require Water: This special cleaner does not reduce the working temperature of the tool. They are made of non-corrosive material and does not require additional time the tool’s reheating..
Check Stock

MEGA2560 Screw Terminal Block Breakout Module with Aluminum Enclosure, for Arduino MEGA 2560 R3

  • Screw connection will hold tightly.Solder good,holds both stranded and solid copper wires secure.Fits good in circuit board,doesn't twist and break when the screws are tightened,will not lose or slip around.The leads are aligned for a standard breadboard and fit securely.The pins themselves are slim enough to fit through the holes,doesn't destroy the plating on the inside..
  • Won't lead to strip screw heads,broken solder joints or poor connections.Makes good electrical contact,looks good and neat.Not allow the wire to get off-center when inserted.The connector will not melt things when soldered to them.They are not too thick that fit perfectly next to each other on a protoboard.You can jam them in there and they sit parallel..
  • Easy to insert into prototype boards and solder the pins.These connectors work well on PCBs.Can be used on a breadboard power rails if plugged in at an angle.The screw connections can open enough to let a wire enter freely,doesn't make it difficult to enter and tighten the wires.Make it easier to swap out things like simple antennas,low voltage power sources,sensors,ect..
  • Needn't over-torque the screws and they will hold up fine.When you want to move wires,wires come right out with the slightest movement.Great for mounting on or in ....
Check Stock

YIHUA 907I Red Grip Replacement Soldering Iron Handpiece/Handle for Yihua 995D+ Rework and Soldering Station

  • The bundle includes: The 939D+ Professional Soldering Station (Pack 2) with the M180 Professional Soldering Work Mat.
  • The 939D+ Pack 2 includes essential accessories: 3 x assorted solder tips, 1 x cleaning sponge, 1 x 50g 0.8mm solder wire, 1 x solder wick, 1 x holder, 1 x Cleaning Kit (brass ball+rosin).
  • The 939D+ Soldering Station: You can select from 392-896°F for your work. The built-in temperature stabilization function keeps the iron at set temperature steadily for your work..
  • 17.32" x 12.20" M180 Work Mat: The heat resistant work mat can help prevent the accidental burning of your work desk. It also comes with component slots and rulers to help you organize your work desk..
  • Quality Assurance: Because you buy directly from the manufacturer, you can enjoy 1-year quality assurance on all our soldering iron/station & rework stations/portable hot air guns. (*consumable product such as soldering iron tips are not covered by the warranty) On top of that, you'll also gain access to our on-demand after sales support on amazon for any troubleshooting/general queries..
Check Stock