10 Pieces No Clean Soldering Flux Pen and Solder Remover Wick, 0.1 Inch Wide and 59 Inch Long, Solder Braid Wick Liquid Solder Flux Pen for Electronics Welding Repair Tabbing Wire Maintenance
- Nice combination: you will get 5 no clean soldering flux pens and 5 solder remover wick sets, 10 in total, sufficient quantity, thoughtful combination, to meet daily use and replacement needs.
- Appropriate size: the no-clean solder wick is about 1.5 m/ 59 inches long and 2.5 mm/ 0.1 inches wide, and liquid flux brush flux pen is about 15 x 1.5 cm/ 6 x 0.6 inch, convenient to hold.
- Please check the size carefully before purchasing.
- Multiple reliable materials: these no-clean braided soldering wicks are made of quality copper wire, using nice weaving technology, which can enhance surface tension and absorb excess solder.
- And flux remover pen adopts quality material, non-leakage, flux safe and prevents you from being exposed to organic solvents.
- Practical tools: soft brush tip flux pen releases a moderate stream of liquid to clean components without spoiling the PCB copper foil or IC pins.
- Solder remover has good thermal conductivity and absorption, helping to reduce the risk of thermal spoiling to the board.
- Broad utilization: these flux pens and braided solder wicks can be applied in laboratories, computers, home repairs and to correct small PCB errors and through-hole joints, electronic soldering and much more, bringing a lot of convenience and effic....
Check StockLA-CO 22101 Regular Soldering Flux Paste, 2 oz
- Flux facilitates the flow of solder, providing for more controlled and accurate soldering • Solder will flow wherever flux is applied.
- Increases efficiency and expedites the soldering process, taking less time to get the solder to flow where you need it.
- Allows the solder to form strong, long lasting mechanical and electrical bonds.
- Prevents corrosion by forming a protective coating over the solder joint.
Check StockSolder Flux (56.6 grms)| flux paste | rosin solder | electrical flux paste | solder paste no clean | flux paste for soldering | rosen flux paste | solder flux electrical | flux paste for electronics
- [Enought Quantity] : This rosin solder flux comes in 1 jar of 56 grams of soldering flux..
- [Non Corrosive]: This non acid flux is not conductive in dry conditions and has good insulation. Is not corrosive to metal substances such as circuit boards..
- [Oxidation Resistance] : This solder flux for electronics Anti-oxidation effect on soldering iron head of gold-copper alloy substrate. Solder flux for semi-solid, not easy to dump or waste..
- [Strong Capability]: This rosin paste flux is suitable for welding instruments, gold, copper, tin, iron and other metals. Ideal for electronic welding, repair and rework..
Check Stock
Youland Soldering Iron Tip Cleaner + 60/40 Solder Wire Reel Fine 0.6mm Tin Lead Rosin Core (1.76oz/50g) + Soldering Rosin Flux Paste Gel (0.35oz/10g) for Electronics Metalworking Welding
- √ Ideal Choice for Soldering Accessories Kit —— Contains 3 of the most essential products for welding, saving you time of multiple purchases. NOTE: solder wire & flux were packed in the container.
- √ Feature of Solder Iron Tip / Head Cleaner —— Sturdy metal container.
- The Sponge made from brass coils, softer than the tip plating, yet harder than the oxidation that forms on the tip. Won't damage your soldering tips. To clean the tip, just stab the iron into the holder, great alternative to a wet sponge. No water required, meaning less chance of oxidation and won't reduce tips temperature, Avoid soldering iron cooling, improve welding efficiency.
- √ Feature of Solder Rosin Wire Core Tin —— Produced with international standard flux formula, Low melting point: 374℉ / 190℃.
- Good activity, Stable performance, Stable performance, fast tinning.
- fresh smell, less smoke, no toxic gases, less splashing when welding.
- Solder joints are bright and firm, forming a protective film on the surface of the solder joint after soldering, relieving solder joints Oxidation reaction.
- low melting point high insulation resistance, reduced welding time.
- √ Feature of Solder Rosin Flux Paste —— No-clean solder paste with minimal residue and no cleaning requ....
Check Stock
3 Pieces No Clean Soldering Flux Pen Rosin Solder Flux Pen for Electronics Tabbing Wiring Solder, Welding Maintenance of PCB Board, No
- Quantity and size: package contains 3 pieces soldering flux pens, enough quantity for meeting your daily usage and replacement.
- Each soldering flux pen measures approx. 5.6 inches in length.
- Safe to use: these flux pens are made of quality material, no leak and safe to use.
- Low solids content and quality of the activator system results in practically no residue left on the assembly after soldering.
- No residue will interfere with electrical testing.
- Useful and practical: no clean soldering flux pen is a novel tool for rework and repair welding.
- It allows controlled application of flux, thereby removing dirt in the flux bottle.
- Pen tip of 10 ml with practical designed felt tip.
- The solid content is low and there is almost no residue.
- Wide application: rosin solder flux pen is suitable for automotive, computer, work for rework, and through hole solder joints.
- It is lightweight and would not occupy too much space, suitable pocket size to carry.
- How to use: before the first time use, you should press the pen tip 1 - 2 times for releasing air, then use no clean solder flux pen to remove the oxidizing wax.
- After that, you can use the alcohol to clean the pen.
Check StockWeller WE1010NA KIT 3-70 Watt Digital Soldering Station
- 70 watt soldering station with can of flux removerand 1lb spool of 63/37 tin lead solder.
- Includes MG Chemicals 4140-400G flux remover.
- Includes one pound spool of Amerway 63/37 solder (made in the USA).
- Must ship UPS / Fed Ex Ground because of flux remover.
Check Stock
SFC TOOLS Standard Jewelry Soldering Kit with Silver Solder Wire Kit-1750
- Kit Includes: Mini Butane Torch, Sparex Pickle Compound.
- Handy Flux, Magnesia Soldering Block, Copper Tongs with Curved Tip,.
- Silver Solder Wire - Easy, Medium and Hard,.
- Tweezers - Boley Style, Third Hand w/Tweezers, Tripod with Mesh Screen,.
- Eco Solder Pick, Wire Cutter (Style and PVC color may vary), Utility Flux BrushDescriptionWe put this soldering kit together with all the tools and supplies you will need to start soldering, whether you are a beginner, taking a class, or are setting up your studio. You will be able to immediately solder sterling silver, fine silver, PMC3, nickle silver, copper, brass, and bronze. These soldering tools are all you need to perform small soldering tasks for jewelry making and repairs, tasks such as balling headpins, soldering chain ends, pin backs and bails, soldering jump rings closed and so much more. We recommend starting with 16-22 gauge sheet and wire if you're a beginner. Butane is not included and will need to be purchased separately. Kit includes: SFC Tools Micro Torch - Handheld Butane Torch, Silver Solder Wire 20 gauge - 1 foot each of easy, medium, and hard, Sparex Pickle Compound - 10 oz jar, Handy Flux - 8 oz. jar, Magnesia Soldering Block, Copper Tongs, Precision Tweezer - AA Fine Tip, Third Hand with Cr....
Check StockMG Chemicals 4895-227G 60/40 Rosin Core Leaded Solder, 0.032\ Diameter, 1/2 lbs Spool
- Tin Lead Rosin Core Solder：rosin core solder wire is designed for electrical repairs, such as radios, TVs, VCRs, stereos, wires, motors, circuit board and other electronics devices，gauge wires, toys, stained glass, jewelry and more.
- Solder Wire Composition：60% Tin and 40% lead. Melting point 190°C / 374°F, quick and easy，Rosin core with 2% flux, no extra flux is needed.
- Good quality soldering wire: flows well and heats evenly, easy to use. Good solder ability both in electrical conductivity and thermal conductivity.
- With the solder wire reel, soldering can be accomplished quickly..
- Pack Content: 50g( 0.11lbs) 0.6mm X1 and 50g( 0.11lbs) 1.5mm X1, perfect as a starter kit for beginners.
- Rosin Core Solder Wire:We have a professional team and provide high 60/40 rosin core solder wire..
Check StockSRA Soldering Wick with Flat Woven Copper Desoldering Braid Strip and No Clean Flux for Easy Damage-Free Solder Removal - 3 Pack of 10 Foot Solder Wick Spools
- 10ft Super Sized Desolder Spools: 30 Feet of standard width .098" desoldering wick infused with no-clean flux for fast and efficient solder wicking action..
- High Quality Materials: Impurity-free woven copper desolder braid construction with 3% no-clean flux provides superior conductivity, even at low temperatures..
- Easy to Use: Simply place desolder wick over work and apply heat to remove solder from parts and terminals, break solder bridges, and correct other soldering mistakes..
- Fast & Effective Wicking: Unique gap-weave coated solder wick braid absorbs solder quickly like a sponge, reducing the likelihood of overheating and lifted pads..
- PCB Safe Residues: Desolder wick leaves little flux residue that is non-conductive and non-corrosive so it requires no cleaning. This product is also RoHs compliant..
Check StockSolder Wire and Rosin Paste Flux Kit - 60-40 Tin Lead Rosin Core Solder Wire 0.6mm 50g and Rosin Paste Flux for PCB Electrical Soldering and DIY from Plusivo
- Solder Wire: Included in the kit is a high quality 50 grams 60-40 (Sn/Pb) Tin - Lead rosin core solder wire alloy with 0.6mm diameter and 1.6% flux....
- Rosin Paste Flux: This high-quality rosin flux soldering paste facilitates the flow of solder, thus increasing the efficiency of the soldering process....
- BONUS Items: Aside from the solder wire and rosin paste, this kit also includes 2 mini screwdrivers and two 22 AWG Wire tinned copper PVC jacket, a....
- Durable Carton Box: All items are neatly packed inside a durable carton box to keep them organized, secured, and easy to carry and transport anywhere..
- Satisfaction Guarantee: The Solder Wire and Paste Kit is backed by the manufacturer’s 30-day money-back guarantee and lifetime customer support,....
Check StockTix Solder Kit - Jewelry Repair and Craft Soldering Kit
- Our Tix Solder melts at 275°F but is much stronger than other Lead or Tin Solders. Does not tarnish and can be used to solder Platinum, Gold, Silver, Stainless Steel, Pewter and many other alloys. Use with torch or soldering iron..
Check Stock
5 In1 Lead Free Solder and Solder Flux Kit | 50g Lead-Free Solder Paste | 0.6mm Solder Wire with Rosin Core | 5 Pcs Replacement Soldering Iron Tips | Solder Supplies for Electronics Metalwork Weld
- [Good quality soldering wire] Lead free solder wire with rosin core: 0.6 mm/ 0.023 inches.Materials: Sn99.3%, Cu0.7%. Weight: 50gram/0.11lbs/1.76ounces.Lower Melting Point, good welding performance..
- [Rosin Solder Flux] Lead free flux, PH7±0.3, Weight: 50gram/0.11lbs/1.76ounces. Solder flux facilitates the flow of solder, solder paste can increases efficiency of the soldering process，allows solder to form strong..
- [5 Solder Tips] Copper tips are plated with iron, nickel .5 Pcs replacement soldering iron tips for different shapes and sizes.This speical customized tip set can achieve almost any soldering application you need..
- [Protect users and the environment] We use lead-free formula to ensure that your welding work will not harm your health due to lead smoke.At the same time, lead-free products will not damage our environment due to product residue..
- [Surprise price]Buying this set will save you more money than buying any of the products in the kit separately.If you are not 100% satisfied just contact us, we will provide you with a full refund or exchange immediately! No any risk, add to your cart now..
Check Stockyzc Rosin core solder-Solder wire 63-37 Solder flux, Electronic solder, diameter 1MM, net weight 20G, portable storage tube, suitable for electronics, circuit boards, ICs, etc. DIY(Rosin core solder)
- 【rosin core solder wire:】Solder flux solder wire with special formula of high-quality tin ingots from Yunnan, China and high-quality rosin..
- 【Tin wire parameters:】 rosin solder wire Tin 63%- Lead 37% (Sn63-Pb37)..
- 【Soldering wire specifications:】rosin flux content 1.8%, rosin solder wire 1.0mm (0.0394inch), 20 gm (0.044lbs), gross weight 28 gm (0.0617lbs),Tin pen is suitable for carrying in a pocket..
- 【Low melting point:】 361F/183C. Easy to solder, smooth flow, fast soldering speed and firm solder joints..
- 【Electronic solder Application:】Rosin core solder wire for-solder for electronics Have Very good soldering ability, especially the repair of electrical equipment such as circuit boards,electronics，IC, home improvement, cable TV, radio/sterro,toys etc DIY..
Check Stock
