Categories

Best Solder For Battery Cable S

FlySight 5.8GHz 32-Channel A/V Transmitter, 400mW (TX5804)

  • Compatible ：COZMO Vector robot、 SkyBell HD WiFi Video Doorbell、Flysight FPV Watch、 wireless speaker Battery replacement。It can also be used in other 3.7-5V electronic products with power less than 2.3Wh (620mAh)..
  • ★503040 rechargeable lithium ion polymer battery, nominal voltage 3.7V, full charge voltage 4.2V, capacity 620mAh, power 2.29Wh, size 5×30×40.5mm(0.197×1.181×1.598inch）(T*W*L), Weight:13g(0.46oz)，Maximum current:0.6A。 It can prevent overcharge, overdischarge, overcurrent, and short circuit..
  • ★It‘s consists of of large-capacity A+ lithium battery, Japanese Seiko IC overcharge and overcurrent short circuit protection board, 3302-26 high temperature resistant silicone cable, and genuine JST Pitch1.25mm 2-pin connector module..
  • ★Please carefully compare the polarity of the connector before use,the red wire is the positive "+" and the black wire is the negative "-"，Do not reverse-charge or reverse-connectreverse. The primary battery of some products has no plug or mismatched plug or mismatched polarity. It doesn't matter, you can cut and solder the plug directly or use our heat shrinkable insulating sleeve to connect the same color wire..
  • ★If there is any quality problem within one year。 please contact us in time，....
Check Stock

GoldenEye [Blu-ray]

  • BATTERIES AND TOOLS SEPARATELY PACKED IN A SEALED PACK: CR2032 Batteries 10 Pack with Solder Tabs and 3.8mm, 4.5mm Security Bits and Triwing Screwdriver Set..
  • SUPER NINTENDO N64 NES BATTERY REPLACEMENT: These batteries are the perfect replacement for your N64, NES and Super Nintendo Games Cartridge..
  • N64 NES SNES KIT: Replace your favorite Nintendo cartridge save batteries. Comes with batteries and 3 N64, SNES, NES game screwdriver..
  • SOLDER TAB BUTTON CELL BATTERY: Perfect for replacing batteries without the need to add any solder tabs, makes replacing save battery in your games fast and easy.
  • WORKING BATTERIES GUARANTEE: All Batteries are packaged separately, so no batteries will be dead on arrival. If any batteries arrive dead, please contact us for a free replacement!.
Check Stock

Hi-Gear Battery Quick Connect Disconnect Electrical Plug kit 2-4 Gauge 175 Amps for Recovery Winch or Trailer by Alfa Wheels (1)

  • ✅Simple Installation - Fits 1/0 Awg cable.
  • Capacity 175 Amps. Just put the cable in terminal (DIA: 0.433 inch), solder or crimp them, then slide them into the back of plug and lock in place.
  • ✅PC Housing - The shell of the battery quick connector made of PC materials, which makes it sturdy and reliable with the perfect continuity and fire-retardant to bad environment.
  • ✅High Conductivity - The terminal of these winch battery quick connect are made from silver plated copper, it has strong high conductivity also keep a stable voltage and current.
  • ✅Wide Application - Our battery quick connector provides a simple and convenient method for connect/disconnect power to a winch or other electrical device.
  • ✅Safe Contact - These battery connectors ends are constructed with Spring steel, that ensures an excellent impact resistance and vibration resistance for the batteries.
Check Stock

Lava Mini Ultramafic (Purple) - 6 Inch - Guitar Bass Effects Instrument, S-Shaped Patch Cable with Premium Gold Plated ¼ Inch (6.35mm) Low-Profile, Right Angled Pancake Type TS Connectors

  • Lava Mini Ultramafic 30pF/ft, 99.99% Pure Silver Plated Copper (SPC) Core patch cable with its 98% coverage SPC braided shield enables you to get the most out of your system. Small in diameter & extremely flexible, perfect for pedal boards & racks..
  • Since inception, Lava Cable – USA, has been developing & producing innovative cable & accessory products for Music Industry using U.S. manufacturers & the best metals & materials to provide its customers with a better solution for their cable needs..
  • Heavy-duty construction with the lowest profile pancake design in the market to save space. High-End Gold plating increases conductivity, tarnish-resistancy & visually compliments the rig. Custom Boot protects the cable from damage by handling stresses..
  • All our bespoke cables are professionally soldered using WORLDS BEST CABLES proprietary 4% silver solder blend & a nitrogen-assisted soldering process unique to us, exceeding industry standards, improves integrity of solder joints over traditional methods..
  • This sale is for a single S-Shaped patch cable (1 unit), which is 6 Inch long. Cable color is Purple. Cable length is measured from TIP to TIP as depicted in the images in this listing (please refer to the image gallery)..
Check Stock

TuoLauthon 175A 600V Battery Connector AWG 1/0 Quick Connect Battery Modular Power Connectors for Winch Auto Car Trailer Driver Electrical Devices 1-2 Gauge

  • ✅Simple Installation - Fits 2/0 awg Cable.
  • Capacity 350Amps. Just put the cable in terminal (DIA: 0.496 inch), solder or crimp them, then slide them into the back of plug and lock in place.
  • ✅PC Housing - The shell of the battery quick connector made of PC materials, which makes it sturdy and reliable with the perfect continuity and fire-retardant to bad environment.
  • ✅High Conductivity - The terminal of these winch battery quick connect are made from silver plated copper, it has strong high conductivity also keep a stable voltage and current.
  • ✅Wide Application - Our battery quick connector provides a simple and convenient method for connect/disconnect power to a winch, trailer or other electrical device.
  • ✅Safe Contact - These battery connectors ends are constructed with Spring steel, that ensures an excellent impact resistance and vibration resistance for the batteries.
Check Stock

Seismic Audio SAPT244 Long Body Only Nickel Plated RCA Connector

  • APPLICATION: Replacing RCA Cable Connectors.
  • FEATURES: RCA Cable Connector with Solder Terminals - Ideal for Pro Audio Cables and other audio applications - Nickel Plated- Durable Construction and Design - High Quality Connector - Center conductor has solder cup.
Check Stock

3 Foot RCA Cable Pair - Canare L-4E6S, Star Quad, Audio Interconnect Cable with Premium Gold Plated Locking RCA Connectors - Directional - Custom Made by WORLDS BEST CABLES.

  • Audiophile Locking RCA connectors: 3 Micron thick Gold plating to ensure increased durability and tarnish resistance. Four way split, spring action hollow central pin for best contact performance. 3 set screws securely hold’s the cable at the neck..
  • All our bespoke cables are professionally soldered using WORLDS BEST CABLES proprietary 4% silver solder blend & a nitrogen-assisted soldering process unique to us, exceeding industry standards, improves integrity of solder joints over traditional methods..
  • This sale is for a pair of ‘directional’ cables, each cable is 3 Foot long (2 cables for left and right channels). Please refer to images for detailed specifications about the connectors & the cable, connecting instructions and construction chart..
Check Stock

3 Foot – Audiophile High-Definition Audio Interconnect Cable Pair Custom Made by WORLDS BEST CABLES – Using Mogami 2497 Wire and Eminence Gold Locking RCA Connectors

  • ...embly: Eminence DWA-337 Audiophile Locking RCA connectors: 3 Micron thick Gold plating to ensure increased durability and tarnish resistance. Four way split, spring action hollow central pin for best contact performance. 3 set screws securely hold’s the cable at the neck..
  • All our bespoke cables are professionally soldered using WORLDS BEST CABLES proprietary 4% silver solder blend & a nitrogen-assisted soldering process unique to us, exceeding industry standards, improves integrity of solder joints over traditional methods..
  • These are custom made cables lovingly assembled by WORLDS BEST CABLES, we offer the largest array of custom built cables in the market, we carry all the major cable and connector brands. We have served millions of customers with quality assemblies for - This sale is for a pair of cables, each cable is 3 Foot long (2 cables for left and right channels)..
Check Stock

yzc Rosin core solder-Solder wire 63-37 Solder flux, Electronic solder, diameter 1MM, net weight 20G, portable storage tube, suitable for electronics, circuit boards, ICs, etc. DIY(Rosin core solder)

  • 【rosin core solder wire:】Solder flux solder wire with special formula of high-quality tin ingots from Yunnan, China and high-quality rosin..
  • 【Tin wire parameters:】 rosin solder wire Tin 63%- Lead 37% (Sn63-Pb37)..
  • 【Soldering wire specifications:】rosin flux content 1.8%, rosin solder wire 1.0mm (0.0394inch), 20 gm (0.044lbs), gross weight 28 gm (0.0617lbs),Tin pen is suitable for carrying in a pocket..
  • 【Low melting point:】 361F/183C. Easy to solder, smooth flow, fast soldering speed and firm solder joints..
  • 【Electronic solder Application:】Rosin core solder wire for-solder for electronics Have Very good soldering ability, especially the repair of electrical equipment such as circuit boards,electronics，IC, home improvement, cable TV, radio/sterro,toys etc DIY..
Check Stock

3 Foot – Directional High-Definition Audio Interconnect Cable Pair Custom Made by WORLDS BEST CABLES – Using Mogami 2549 Wire and Eminence Gold Locking RCA Connectors

  • ... custom cable assembly: Audiophile Locking RCA connectors: 3 Micron thick Gold plating to ensure increased durability and tarnish resistance. Four way split, spring action hollow central pin for best contact performance. 3 set screws securely hold’s the cable at the neck..
  • All our bespoke cables are professionally soldered using WORLDS BEST CABLES proprietary 4% silver solder blend & a nitrogen-assisted soldering process unique to us, exceeding industry standards, improves integrity of solder joints over traditional methods..
  • These are custom made cables lovingly assembled by WORLDS BEST CABLES, we offer the largest array of custom built cables in the market, we carry all the major cable and connector brands. We have served millions of customers with quality assemblies for many years - This sale is for a pair of ‘directional’ cables, each cable is 3 Foot long (2 cables for left and right channels)..
Check Stock

DZS Elec 6pcs 15cm 9V Battery Snap Connector Clip Lead Wire Experimental Battery Snap Power Cable for Arduino Project or LED Light Bar

  • Type: 9V T Type Battery Snap Connector, to power anything that running with a 9V battery..
  • Use: Can be conveniently connected to other power module or Arduino board..
  • Cable: Approx. 15cm (6 inch) length, red wire for positive, black wire for negative, easy to connect or solder to other equipment..
  • Application: Can be used for power supply or other 9V battery equipment, supplying power sourcec for Arduino Project or LED Light Bar etc. portable, easy to use..
  • Package: 6pcs 9V T Type Battery Snap Connector Clip Lead Wire (NO battery included).
Check Stock

2.5 Foot – Audiophile High-Definition Audio Interconnect Cable Pair Custom Made by WORLDS BEST CABLES – Using Mogami 2497 Wire and Eminence Gold Locking RCA Connectors

  • ...embly: Eminence DWA-337 Audiophile Locking RCA connectors: 3 Micron thick Gold plating to ensure increased durability and tarnish resistance. Four way split, spring action hollow central pin for best contact performance. 3 set screws securely hold’s the cable at the neck..
  • All our bespoke cables are professionally soldered using WORLDS BEST CABLES proprietary 4% silver solder blend & a nitrogen-assisted soldering process unique to us, exceeding industry standards, improves integrity of solder joints over traditional methods..
  • These are custom made cables lovingly assembled by WORLDS BEST CABLES, we offer the largest array of custom built cables in the market, we carry all the major cable and connector brands. We have served millions of customers with quality assemblies for - This sale is for a pair of cables, each cable is 2.5 Foot long (2 cables for left and right channels)..
Check Stock

1.5 Foot – Audiophile High-Definition Audio Interconnect Cable Pair Custom Made by WORLDS BEST CABLES – Using Mogami 2497 Wire and Eminence Gold Locking RCA Connectors

  • ...embly: Eminence DWA-337 Audiophile Locking RCA connectors: 3 Micron thick Gold plating to ensure increased durability and tarnish resistance. Four way split, spring action hollow central pin for best contact performance. 3 set screws securely hold’s the cable at the neck..
  • All our bespoke cables are professionally soldered using WORLDS BEST CABLES proprietary 4% silver solder blend & a nitrogen-assisted soldering process unique to us, exceeding industry standards, improves integrity of solder joints over traditional methods..
  • These are custom made cables lovingly assembled by WORLDS BEST CABLES, we offer the largest array of custom built cables in the market, we carry all the major cable and connector brands. We have served millions of customers with quality assemblies for - This sale is for a pair of cables, each cable is 1.5 Foot long (2 cables for left and right channels)..
Check Stock