Categories

Best Solder For Circuit Boards

Tenma 21-8240 Vacuum Desoldering Iron

  • 30 Watt: Powerful enough to remove common soldering mistakes found on small devices. Heats up quickly..
  • Easy Operation: Designed for right or left-hand operation. Quickly heats up and uses a strong vacuum pump to remove solder..
  • Lays flat: When not in use or when in-between jobs, the desoldering pump lays lat with the hot tip elevated to prevent from unwanted burns.
  • Used to correct mistakes with small boards on PCBs, re-solder mechanical keyboard switches, remove relays and other components from printed circuit boards, unsoldering old wires, desoldering computer parts like motherboards, clean alloy on smd components and more..
Check Stock

MOGAOPI Solder Wick and Desoldering Pump, Spare nozzle, Solder Sucker & Desoldering Wick,1pcs Solder Braid Desoldering Vacuum Pump Solder Remover Tool

  • ...d heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time..
  • ( Widely used Solder Remover ) The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more..
Check Stock

Tabiger Solder Wick & Desoldering Pump, Solder Sucker & Desoldering Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length)- Desoldering Vacuum Pump Solder Remover

  • ...ldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts..
  • 【Widely used Solder Remover】 The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more..
Check Stock

Mogaopi Desoldering Wick, Desoldering Pump, Solder Sucker, Solder Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length) Solder Wire, Replacement Tip, Desoldering Vacuum Pump Solder Removal Tool

  • ... also the covered sponge can absorb sweat and heat, make it comfortable to hold. Right or Left handed design allows easy one-handed use..
  • 【Widely used Solder Remover】:The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more..
Check Stock

TBBSC Lead Free Solder Wire Fine Alloy Solder Sn99.3 Cu0.7 for Electrical Soldering (0.8mm 50g)

  • Solder Wire Diameter is 0.032in ( 0.8mm ), gross weight 50gram (0.11lbs),suitable for fine soldering work on connector, wire, IC, Capacitor etc..
  • High quality lead free solder wire,The Soldering Wire has antioxidant for a long time and good weldability, melts quick and clean, flows smooth..
  • Lead free solder wire designed for electrical maintenance, such as radios, televisions, video recorders, stereo systems, wires, motors, circuit boards and other electronic devices..
  • Very good soldering capability, flow well during soldering, easy for soldering,esp for circuit board, DIY, home improvement..
  • Well Packed for Secure Shipping easily maintained transportable and easy to use Make it yours today..
Check Stock

Lesnow solder wick Braid With Flux 3mm/0.12" Width 10' Length, No-Clean Desoldering Wick Braid Remover tool, Soldering Wick Disassemble Electrical Components,copper desolder wick Braid

  • The braided solder wicks are suitable for labs, home and industry welding work,can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.
  • This desoldering wick has geometrically-precise weave with copper wires with nice quality and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area..
  • 1 pieces of no-clean solder wicks, each wick is about 10ft long and 0.12 inch in width, enough quantity and length for your daily needs.
  • If you are using the solder wick for the first time, it is recommended to use a multi-point flux to assist in cleaning，At the same time, in order to prevent burns, do not directly touch the solder core at close range during use..
  • If for any reason you are not 100% satisfied with lesnow solder cores, we sup....
Check Stock

Soldering Iron Auxiliary Kit, Desoldering Pump, No-Clean Soldering Core (Width2.5mm / 0.1\

  • The main body of the desoldering pump is made of high-quality ABS material, with a non-slip sponge. The nylon nozzle can withstand high temperature, anti-static, heat-resistant, durable, special design, convenient for one-handed use..
  • High-quality desoldering braided tape is woven with fine copper wire, unique no-clean flux, easy to use, pure oxygen-free copper wire, 2.5mm / 0.1 inch width and 1.5m / 59 inch length, can help remove excess Avoid solder,Avoid short circuit， especially in hard-to-reach small areas..
  • Micro Shear Wire Cutter Pliers are made of high quality steel, with strong cutting ability, For cutting flexible cords up to 1 mm, non-slip handles, return springs, small volume。.
  • Solder wire diameter: 0.8mm, weight: about 0.35 ounces / 10 grams. Easy to carry and store, suitable for various soldering irons..
  • Suitable for correcting errors on PCB boards, cleaning small components, resoldering and desoldering circuit boards, Appliance Repair, Family DIY lovers, welding, etc..
Check Stock

Solder Sucker Desoldering Pump Sucking Vacuum Desoldering Pump with Teflone Tip 13 Solder Sucker Silicone Desoldering Tool Desoldering Pumps Blue Soldapullt

  • SOLDER REMOVAL KIT The solder sucker can be used for both broad and small places, hard to reach areas, can be used to correct all mistakes with small boards on PCBs, remove relays and other components from printed circuit boards.
  • DESIGN Designed in color blue and orange plastic, has anti-skid design so it is easy to hold and use. Heavy-duty, Length:13", Diameter: 1.65", Tip Diameter: 0.32".
  • EASY TO USE You can use the desoldering wick pump just by Cocking the pump's mechanism by pushing down on the table with your non-soldering hand. Teflon (PTFE) nonstick coating tip and cushioned shock reduction minimize board damage.
  • HIGH QUALITY The solder sucker has high quality plastic material, high temperature heat-resisting during long term use. 13 incg long corrosion-resistant plastic body and flexible silicon tube.
  • AMBIDEXTROUS Simple design construction of the solder sucking vacuum makes it right and left-handed, so everyone can use it easily.
Check Stock

Solder Wick Braid Copper Wire with flux 10 ft 3M Length X 2.5mm Width I Desoldering Wire I Solder Sucker I Solder Remover I Soldering Iron I Solder Braid for Circuit Board 1pcs

  • ✔️EXCELLENT QUALITY : Our No-clean Desoldering Wick Wire is made of Ultra-thin 100% pure braided copper. Free impurity and oxide-free desoldering wick that contains 2% RMA (Rosin Midly Activated) flux..
  • ✔️ENOUGHT QUANTITY: The package includes high quality desoldering wick wire 10 ft(3M) long x 2.5 mm width, Twice as more as standard solder wicks. Its fine geometrical design makes the molten solder wicks away quickly and efficiently. Enough for your daily work needs..
  • ✔️LOW RESIDUE : No-clean desoldering wick leaves halide-free, non-conductive, non corrosive environmental friendly residues, RoHs compliant. No need to clean surface after desoldering process..
  • ✔️GREAT PROPERTIES: Design with strong capillary action resulting in increased absorption of solder excess. Less heat neccesary by its excellent thermal conductivity. Job done faster and efficiently without damaging circuit board sensitive pads, welding points or SMD components..
  • ✔️SCOPE OF APPLICATION: For all kind of electronic circuit boards, replace faulty components, Clean joints and pads, remove excess solder, correct solder bridges, Clean excess solder from PCB during solder, desolder, rework or reflow process..
Check Stock

yzc Rosin core solder-Solder wire 63-37 Solder flux, Electronic solder, diameter 1MM, net weight 20G, portable storage tube, suitable for electronics, circuit boards, ICs, etc. DIY(Rosin core solder)

  • 【rosin core solder wire:】Solder flux solder wire with special formula of high-quality tin ingots from Yunnan, China and high-quality rosin..
  • 【Tin wire parameters:】 rosin solder wire Tin 63%- Lead 37% (Sn63-Pb37)..
  • 【Soldering wire specifications:】rosin flux content 1.8%, rosin solder wire 1.0mm (0.0394inch), 20 gm (0.044lbs), gross weight 28 gm (0.0617lbs),Tin pen is suitable for carrying in a pocket..
  • 【Low melting point:】 361F/183C. Easy to solder, smooth flow, fast soldering speed and firm solder joints..
  • 【Electronic solder Application:】Rosin core solder wire for-solder for electronics Have Very good soldering ability, especially the repair of electrical equipment such as circuit boards,electronics，IC, home improvement, cable TV, radio/sterro,toys etc DIY..
Check Stock

Tin Lead 63/37 Rosin Core Low Temp Solder Wire For Electronics Components And DIY repair(0.8mm/50g)

  • Best Content Ratio:not that the higher the tin content, the better the solder wire,the best ratio is 63/38 for use.
  • Tin Lead Solder Wire Parameters:solder wire 63/37,soldering wire with flux1.8%,electrical soldering wire dia 0.8mm/0.0315'',solder wire g.w 50g/1.77oz,good size for pocket..
  • Rosin Core Solder Wire Feature:low melting point (361F/184°C),very good soldering capability,smoother welding process,soldering fast,strong soldering point and easier to use.
  • Applications:tin lead rosin core solder wire for electrical devices,esp for radios/televisions/video recorders/stereo systems/wires/ motors/circuit boards and other electronical devices etc.
  • we have a professional service team, ready to provide the best service for each customer, look forward to the start of cooperation, if you have any questions, please feel free to contact us.
Check Stock

SONEAK 60/40 Tin Lead Solder With Rosin Core For Electrical Soldering 1.0mm 50g

  • ★ Tin Lead Solder Wire: High quality Rosin Core Solder Wire.
  • ★ Sn60-Pb40 Solder: Sn 60%- Pb 40%, Flux 2.0%.
  • ★ Lower Melting Point: 361F/183C, easy to be soldered, flows smoothly, soldering fast and strong shiny soldering point.
  • ★ Special Features: This SONEAK 1.0mm solder wire offers lower temperature melting, pretty good flow,clean, less smoke, reliable and nice soldering joint.
  • ★ Applications: Very good soldering capability for electrical soldering, esp DIY project, Home improvement, Maintenance of sterro, toys, TV circuit boards etc. repairing.(Warning: This product can expose you to lead which is know to the State of Califormia to cause brith defects or other reproductive harm. For more information go to the offical Proposition 65 Warnings website).
Check Stock

Tegg 1PC 13 Inches Soldering Iron Desoldering Pump Removal Device Vacuum Blue

  • Type: Desoldering Pump Removal Device Vacuum Soldering Iron Desolder.
  • Color: Blue,Material: ABS Plastic, Metal,Length: 330mm / 13 inches Diameter: 45mm/1.77 inches.
  • Most easy solution for removing solder.The desoldering pump is made with ABS plastic handle, strong spring, high power suction. Designed for one-hand operation, durable and ideal for circuit boards and other solder..
  • Rugged High vacuum, enclosed shaft for safety,It works like Needle Tubing..
  • Quantity:1 PC Desoldering Pump and 2 PCS Tin Suction Mout..
Check Stock