Categories

Best Solder Lugs

Swpeet 15Pcs 6 AWG - 1/4' (M6) Ring Terminals UL Listed Copper Battery Cable Lugs Wire Lugs, Battery Cable Ends Bare Copper Eyelets, Tubular Ring Battery Cable Ends for Enhanced High Temperature

  • ...r wire lugs are UL UL Tested & Approved, offer reliable performance..
  • 3, Higher Conductivity: Made from 100% annealed electrolytic grade copper for maximum conductivity.These ring terminals have a close end pad design, keeping electrical components, batteries and cables safe and free from moisture, and also prevents solder from leaking during installation..
  • 4, 23 Different Sizes: Close End Pad Seals Out Moisture Keeping Cables Dry. So many sizes to meet your daily needs! Freedom to choose from a variety of wire sizes, stud sizes & pack quantities, that fit your requirements and applications.
  • Audio wire may not be a direct fit. Recommend to check product dimensions to ensure a proper fit..
  • 5, Wide Applications: Copper battery cable ends are made from 100% annealed copper, providing a high degree of conductivity for maximum current flow. This particular variant has a 1/2"" Eyelet suitable for use with 1 AWG (1 Gauge) Cable & 1/2"" (M12) Stud..
Check Stock

Dahszhi 40Pcs DC 50V 0.5A 3 Position Vertical Slide Switch 4 Pin SS13F11 Solder Lug Pin

  • Replacement slide switch with six solder lugs.
  • Used in American Vintage (US) and Classic Player (Mexico) Jaguar and Jazz master guitars manufactured from 1998-Present.
  • Whether replacing a worn switch or just adding tonal variety to your favorite instrument, Fender offers high-quality switches.
Check Stock

12PCS 6x3/8 Tinned Copper Ring Terminal Connectors 6 AWG Heavy Duty Battery Cable Ends Bare Copper Lugs with 12 PCS 3:1 Heat Shrink Tubing for Vehicle Boat Marine Use

  • In this kit,we offer 12pcs 6awg heavy-duty lugs with a 3/8 screw size ring,corresponding matching 3:1 red and black heat shrinkable tube..
  • The ring terminal connector made of high-quality copper content of 99.95%,good electrical conductivity.The 3:1 shrink tube is well made of high quality environmental material,thick and durable..
  • The wire lugs connector can be easily crimped or soldered,the heat shrink fit solid or stranded gauge wire,heat shrink provides tight and full seal,prevents leakage of any solder..
  • The ring terminal connector application areas:military/aerospace,household appliances,lighting electronics,automotive electronics,new energy,the 3:1 adhesive-lined heat shrinkable tubing black and red,can be applied in industry,environmental protection material..
  • If you receive a defective product or have any problems with the product,please feel free to contact us,We will provide you with satisfactory service at any time..
Check Stock

RIOCAN 10pcs 2 AWG-5/16”(M8) Tinned Ring Terminals Battery Lugs 2 Gauge Battery Cable Ends Heavy Duty Wire Lugs Battery Cable Connector Copper Lugs Battery Terminal Connectors

  • ... 〖Durable and Reliable〗These tinned battery cable lugs are designed with a heavy duty construction for high temperature durability and enhanced mechanical strength. And closed end design, keeping electrical components, batteries and cables safe and free from moisture, and also prevents solder from leaking during installation. The tinned wire terminals features a flared opening to facilitate cable insertion..
  • 〖Wide Applications〗The tinned battery terminals works with heat shrink tubing are widely used in distribution boxes, power inverters, golf carts, solar panels, boats, home applications, Vehicles, Motorcycles, DIY Electrical Wirings and Other Outdoor Applications..
  • 〖Select and Service〗The tinned copper lugs can be crimped or soldered. Please check the product specifications to ensure fit your requirements and applications. Any problems, please contact us freely, we will back to you ASAP!.
Check Stock

TKDMR 10pcs 2 AWG-5/16\ Battery Lugs,Copper Wire Lugs,Heavy Duty Battery Cable Ends,Tubular Ring Terminals,AWG Crimp Wire Ring Lugs,Battery Terminal Connectors with 3:1 Heat Shrink Tubing

  • ...ll Adhesive Heat Shrink Tubing Tube for your work(5pcs Black and 5pcs Red)..
  • 【Quality Material:】 The TKDMR bare copper battery cable ends are made from 100% annealed copper with special treatment surface for corrosion protection, providing a high degree of conductivity for maximum current flow. Can be Crimped or Soldered.The 3:1 shrink tube is well made of high quality material(UL & CSA certified for up to 600V,257℉）, thick and durable than 2:1 shrink tube..
  • 【Reliable and Easy to Use:】These battery lugs with heavy duty construction,improves high temperature durability and have a close end pad design, keeping electrical components, batteries and cables safe and free from moisture, and also prevents solder from leaking during installation.
  • high standard flared opening for easy wire insertion.The wire shrink wraps are all pre-cut into the most common sizes which improve your work efficiency..
  • 【Wide Applications:】These Copper Lugs works with Heat Shrink Tubing which are safe and reliable , greating for distribution box, golf carts, solar panels, marine,home applications,Vehicle,Motorcycle,DIY Electrical Wirings and Other Outdoor Applications..
  • 【How to Choose and Use it?:】 Recommend to check product dimensions to ensure a proper fit.Freedo....
Check Stock

TKDMR 10pcs 2/0 AWG-3/8' Battery Lugs,Copper Wire Lugs,Heavy Duty Battery Cable Ends,Tubular Ring Terminals,AWG Crimp Wire Ring Lugs,Battery Terminal Connectors with 3:1 Heat Shrink Tubing

  • ...ll Adhesive Heat Shrink Tubing Tube for your work(5pcs Black and 5pcs Red)..
  • 【Quality Material:】 The TKDMR bare copper battery cable ends are made from 100% annealed copper with special treatment surface for corrosion protection, providing a high degree of conductivity for maximum current flow. Can be Crimped or Soldered.The 3:1 shrink tube is well made of high quality material(UL & CSA certified for up to 600V,257℉）, thick and durable than 2:1 shrink tube..
  • 【Reliable and Easy to Use:】These battery lugs with heavy duty construction,improves high temperature durability and have a close end pad design, keeping electrical components, batteries and cables safe and free from moisture, and also prevents solder from leaking during installation.
  • high standard flared opening for easy wire insertion.The wire shrink wraps are all pre-cut into the most common sizes which improve your work efficiency..
  • 【Wide Applications:】These Copper Lugs works with Heat Shrink Tubing which are safe and reliable , greating for distribution box, golf carts, solar panels, marine,home applications,Vehicle,Motorcycle,DIY Electrical Wirings and Other Outdoor Applications..
  • 【How to Choose and Use it?:】 Recommend to check product dimensions to ensure a proper fit.Freedo....
Check Stock

TKDMR 10pcs 6 AWG-5/16' Battery Lugs,with 10pcs 3:1 Heat Shrink Tubing,Battery Cable Ends,Heavy Duty Copper Wire Lugs,Tubular Ring Terminals,AWG Crimp Wire Ring Lugs,Battery Terminal Connectors

  • ... Waterproof Heat Shrink Tubing Tube for your work(5pcs Black and 5pcs Red)..
  • 【Quality Material:】 The TKDMR bare copper battery cable ends are made from 100% annealed copper with special treatment surface for corrosion protection, providing a high degree of conductivity for maximum current flow. Can be Crimped or Soldered.The 3:1 shrink tube is well made of high quality material(UL & CSA certified for up to 600V,257℉）, thick and durable than 2:1 shrink tube..
  • 【Reliable and Easy to Use:】These battery lugs with heavy duty construction,improves high temperature durability and have a close end pad design, keeping electrical components, batteries and cables safe and free from moisture, and also prevents solder from leaking during installation.
  • high standard flared opening for easy wire insertion.The wire shrink wraps are all pre-cut into the most common sizes which improve your work efficiency..
  • 【Wide Applications:】These Copper Lugs works with Heat Shrink Tubing which are safe and reliable , greating for distribution box, golf carts, solar panels, marine,home applications,Vehicle,Motorcycle,DIY Electrical Wirings and Other Outdoor Applications..
  • 【How to Choose and Use it?:】 Recommend to check product dimensions to ensure a proper fit.Freedo....
Check Stock

TKDMR 10pcs 2/0 Awg-3/8' Ring Marine Grade Copper Wire Lugs,with 3:1 Heat Shrink Tubing,UL Battery Cable Ends,Heavy Duty Cable Lugs,Tinned Copper Eyelets,Tubular Ring Terminals

  • ... Heat Shrink Tubing Tube for your work(5pcs Black and 5pcs Red)..
  • 【Quality Material:】 The TKDMR marine grade battery cable ends are made from 100% annealed copper with Tinned surface for corrosion protection, providing a high degree of conductivity for maximum current flow. UL Tested & Approved,Can be Crimped or Soldered.The 3:1 shrink tube is well made of high quality material(UL & CSA certified for up to 600V,257℉）, thick and durable than 2:1 shrink tube..
  • 【Reliable and Durable:】tinned copper wire lugs are corrosion free,through the salt spray test,heavy duty construction,improves high temperature durability and have a close end pad design, keeping electrical components, batteries and cables safe and free from moisture, and also prevents solder from leaking during installation.
  • high standard flared opening for easy wire insertion.The wire shrink wraps are all pre-cut into the most common sizes which improve your work efficiency..
  • 【Wide Applications:】These Copper Lugs works with Heat Shrink Tubing which are safe and reliable , ideal for marine, automotive,distribution box, golf carts, solar panels, marine,home applications,Vehicle,Motorcycle,DIY Electrical Wirings and Other Outdoor Applications..
  • 【How to Choose and Use it?:】 Recommen....
Check Stock

A-Team Performance - 2/0 AWG Battery Cable 3/8 Inches Tubular Lug Ring/Eye Terminals - for Battery and Welding Cables with 12 V Solar Panels and Inverter Cables 15 Per Package

  • 2/0 AWG Battery Cable 3/8 Inches Tubular Lug Ring/Eye Terminals.
  • For Battery and Welding Cables with 12 V Solar Panels and Inverter Cables, 15 Per Package.
  • Heavy duty construction and easy to install copper lugs.
  • Close end pad seals out moisture to keep cables dry and prevent solder leakage.
Check Stock

Glarks 300Pcs Open Barrel Wire Crimp Copper Ring Lugs Wire Crimp Terminal Connectors OT 5A 10A 20A 30A 40A 50A 60A 100A with Heat Shrink Tubing Assortment Kit for Auto Car Battery Cable Connector

  • ...gh quality red copper material, thickness is 1.5mm, has good electrical conductivity and good oxidation resistance, efficient flame retardant, working temperature range is -30 ~ +60℃(-22-140℉)..
  • ★【Special Design】: The hollow design makes wire connection easier and its open design make it safer to crimp and solder than the standard closed sleeve type, perfect for transformer, circuit breaker..
  • ★【Fine Workmanship】: These wire crimp connector terminal lugs produced under fine processing, you will get the products which are clean and tidy, burr-free, make sure the stability of the circuit..
  • ★【Function and Use】: These crimp ring terminal can be crimped or soldered, can works well with any cable, widely used in the electrical wire connecting of home appliances, mechanical equipment factory, shipyard, power distribution cabinet..
Check Stock

Hilitchi 245-Pcs Open Barrel Wire Crimp Copper Ring Lugs Terminal Connector with 2 1 Heat Shrink Tubing Assortment Kit - OT 5A 10A 20A 30A 40A 50A 60A 100A

  • ☛ High Quality Open Barrel Wire Crimp Copper Ring Lugs Terminal and Heat Shrink Tubing Kit.
  • ☛ Contains Model: OT - 5A / 10A / 20A / 30A / 40A / 50A / 60A / 100A, Ring Terminal: Φ4 / Φ5 / Φ6 / Φ8 / Φ10 / Φ12 Heat Shrink Tubing.
  • ☛ Package Quantity: 245pcs (Ring Terminal: 185Pcs, Heat Shrink Tubing: 60Pcs).
  • ☛ Material: Top Quality Copper, Plastic.
  • Packed in A Rugged Convenient Re-sealable Plastic Storage Case.
  • ☛ This Open Slot Type Lug Works Well with Any Cable, The Open Design is Easier to Crimp and Solder Than the Standard Closed Sleeve Type, Make Your....
Check Stock

MOGAOPI Solder Wick and Desoldering Pump, Spare nozzle, Solder Sucker & Desoldering Wick,1pcs Solder Braid Desoldering Vacuum Pump Solder Remover Tool

  • ( 4-in-1 Solder Removal Tool ) 1pcs desoldering vacuum pumps ,1pcs Spare nozzle ,1pcs solder wicks and 1pcs High Temperature Resistance Silicone Protective Tube(15cm Length), a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts..
  • ( One-handed solder sucker with powerful suction ) you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
  • ( Desoldering Wick with copper braid ) 1pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area..
  • ( ABS body with non-slip sponge and Nylon nozzle desoldering pump ) The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat....
Check Stock

Tabiger Solder Wick & Desoldering Pump, Solder Sucker & Desoldering Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length)- Desoldering Vacuum Pump Solder Remover

  • 【One-handed solder sucker with powerful suction 】 Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
  • 【Desoldering Wick with copper braid】 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area..
  • 【ABS body with non-slip sponge and Nylon nozzle desoldering pump】 The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time..
  • 【3-in-1 Solder Removal Tool】 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while....
Check Stock