Categories

Best Solder Material Electrical Contact

Heavy Duty Power Connectors PP PAK 2-4P HSG SNAP-IN RECEPT -BULK

  • 【PREMIUM IN QUALITY】- Every single piece of our crimp connectors is made with tinned thick red copper barrel and polyolefin heat shrink tubing [Shrink Ratio 3:1], which ensure secure crimping and tight wire connection with high current flow and minimum voltage drop, preventing wire failures..
  • 【FAST AND EASY APPLICATION】All it takes is a heat gun to control the temperature and connect the product, even in a confined space. This product does not require a Solder or crimping, making it easier and more cost-efficient in comparison to standard solder heat shrink butt connectors..
  • 【WATERPROOF】Exterior Polyolefin tubing and hot melt ring inside effectively improve the waterproofing performance of these Solder Connectors..
  • 【WIDE APPLICATIONS】Compliant with all electrical standards, Perfect for marine and automobile applications, whether you are working on your boat, Vehicle, Home or scientific project, our electrical crimp connector will ensure strong watertight seal to make sure everything bond correctly..
  • 【QUALITY COMMITMENT】We stand behind the quality of our products. If for any reason you are not satisfied with your purchase, please contact us..
Check Stock

MG Chemicals 4895-227G 60/40 Rosin Core Leaded Solder, 0.032\ Diameter, 1/2 lbs Spool

  • Tin Lead Rosin Core Solder：rosin core solder wire is designed for electrical repairs, such as radios, TVs, VCRs, stereos, wires, motors, circuit board and other electronics devices，gauge wires, toys, stained glass, jewelry and more.
  • Solder Wire Composition：60% Tin and 40% lead. Melting point 190°C / 374°F, quick and easy，Rosin core with 2% flux, no extra flux is needed.
  • Good quality soldering wire: flows well and heats evenly, easy to use. Good solder ability both in electrical conductivity and thermal conductivity.
  • With the solder wire reel, soldering can be accomplished quickly..
  • Pack Content: 50g( 0.11lbs) 0.6mm X1 and 50g( 0.11lbs) 1.5mm X1, perfect as a starter kit for beginners.
  • Rosin Core Solder Wire:We have a professional team and provide high 60/40 rosin core solder wire..
Check Stock

HKS 800 PCS Solder Seal Wire Connectors - White 26-24 AWG - Heat Shrink Solder Butt Connectors - Tinned - Automotive Marine Boat Crimp - Waterproof and Insulated

  • ...e heating the solder seal wire connector,adequate solder around the wire, melt and flow until form seal on the wire..
  • [Easy Application]Strip wire insulation, use wire crimper crimp Heat Shrink Wire Connector and wire , apply heat with a heat gun while rotating a terminal. Electrical wire terminals crimp connectors will reduce in size and adhere to the wire.No need soldering set . Safe durable connection Finish quickly..
  • [Easy Identification]Different color Heat Shrink Wire Connector kit terminal with wire gauge imprint provides easy identification. measure your wire, and easily choose the right connector by looking at wire gauge imprint on electrical wire terminals crimp connectors..
  • [Insulated Waterproof Seal Prevents Wire Corrosion]Whether you are working on your boat, motorcycle ,vehicle, home or scientific project, our Heat Shrink Wire Connector electrical wire terminals crimp connectors will ensure strong crimps, increased current flow and waterproof connections every times..
  • [Advance Heat Shrink Tubing] Insulation tubing shrinks to 1/3 of its original size, providing the hig....
Check Stock

Electronic Solder Wire Lead Free Rosin Core Flux 2.5% Diameter 0.06in 1.5mm Gauge 1.76oz 50g Sn99 Ag0.3 Cu0.7 Flows Electric Soldering Unleaded PB Free

  • WIDE SOLDER- the diameter of solder wire is 0.06inch/1.5mm, soldering fast, ideal for drag soldering on MCU, IC, DIP components, make soldering quick, suitable most solder job.
  • ROSIN CORE- great solder with rosin core, easy for soldering, the flux 2.5% is better than others with 2.0% on the flowability.
  • LOW MELTING POINT- the melting temperature is about 419 Deg.F, suitable for all soldering tools.
  • WIDELY APPLICATION- the 0.06in diameter solder wire is common to solder most electronics components or wire, ideal for electrical soldering, repairing, diy.
  • ALLOY SOLDER- contained Sn99, Ag0.3 and Cu0.7, make strong solder joint, 0.3% silver is important for electrical conductivity, excellent for soldering.
Check Stock

Cardas Soldering Wire Quad Eutectic Silver Solder with rosin flux 1/4 lbs (113g) roll

  • 【PARAMETER】Solder Wire Diameter 0.031"/0.8mm, Gross Weight 0.11lbs/50g..
  • 【ADVANTAGES】High Purity Raw Material, Flow Well, Strong Solder Joints, Less Residue, No-Cleaning, Low Melting Temperature.
  • 【OTHER FEATURES】Excellent Electrical Conductivity and Thermal Conductivity, Good Solderability.
  • 【WIDE APPLICATIONS】Soldering Training Course, Home Appliances Repair, Toy Repair, Other Electronic Devices Repair, Electronics DIY, Wire Harness Connection, Battery & Motor Wire Connection, etc..
Check Stock

LA-CO 22101 Regular Soldering Flux Paste, 2 oz

  • Flux facilitates the flow of solder, providing for more controlled and accurate soldering • Solder will flow wherever flux is applied.
  • Increases efficiency and expedites the soldering process, taking less time to get the solder to flow where you need it.
  • Allows the solder to form strong, long lasting mechanical and electrical bonds.
  • Prevents corrosion by forming a protective coating over the solder joint.
Check Stock

MEGA2560 Screw Terminal Block Breakout Module with Aluminum Enclosure, for Arduino MEGA 2560 R3

  • ...reak when the screws are tightened,will not lose or slip around.The leads are aligned for a standard breadboard and fit securely.The pins themselves are slim enough to fit through the holes,doesn't destroy the plating on the inside..
  • Won't lead to strip screw heads,broken solder joints or poor connections.Makes good electrical contact,looks good and neat.Not allow the wire to get off-center when inserted.The connector will not melt things when soldered to them.They are not too thick that fit perfectly next to each other on a protoboard.You can jam them in there and they sit parallel..
  • Easy to insert into prototype boards and solder the pins.These connectors work well on PCBs.Can be used on a breadboard power rails if plugged in at an angle.The screw connections can open enough to let a wire enter freely,doesn't make it difficult to enter and tighten the wires.Make it easier to swap out things like simple antennas,low voltage power sources,sensors,ect..
  • Needn't over-torque the screws and they will hold up fine.When you want to move wires,wires come right out with the slightest movement.Great for mounting on or in buildings to attach wires for lighting,so you don't half to desolder delicate LED lead wires every time when want to move a building.Their use ....
Check Stock

Herain No-Clean Solder Wick Desoldering Braided Wicks with Flux Desoldering Wicks Removal Tool Solder Sucker Desoldering Wick Used to Remove the Solder and Disassemble Electrical Components

  • 1.High-quality materials: The solder wick is geometrically precisely braided with high-quality copper wire, which is resistant to oxidation and corrosion, has good thermal conductivity, low residual and no halide, and clean tin absorption..
  • 2.Geometric braid design: The desoldering wick adopts a precise geometric braid design, which ensures a large surface tension and tin absorption ability, and reduces the risk of thermal damage to the circuit board..
  • 3.Widely used: No-clean solder braid is suitable for welding work in laboratories, industries, schools and homes, It is suitable for all kinds of electronics, electrical appliances, precision instruments and meters. It can absorb tin quickly and a large amount of tin, and is dedicated to remove excess solder..
  • 4.Easy to use: Desoldering braid is used to absorb excess solder when removing tin, the fine woven design promotes strong capillary action to suck in excess solder. The main board desoldering spot is removed, and it is used with the soldering station..
  • 5.Ingenuity quality: 1 piece of no-clean solder braided wicks (0.078 inch wide, 9.84 ft length), which is sufficient to meet your work requirements. If you have any product questions, you can contact us at any time..
Check Stock

Canfield 60/40 solder for stained glass (Two Pack)

  • Rosin core solder is ideal for electrical wiring connections because of it-Feets non-conductive residue.
  • Will not cause corrosion or deteriation of electrical connections.
  • Melting point varies highly from 375 to 575 degrees Fahrenheit/190 degrees to 299 degrees Celsius depending on solder size.
Check Stock

AUSTOR Pack of 6 Solder Wire 60-40 Rosin Core Solder 0.6mm Electrical Soldering Wire 20g

  • High quality: good solder ability in both electrical conductivity and thermal conductivity, can be accomplished quickly, and fit for various kinds of soldering iron.
  • Easy to use: flows well and heats evenly, the melting point of soldering iron wire is 185°C - 190°C (365°F - 374°F).
  • Relative parameters: Tin 60% and Lead 40% is perfect for electronic assembly, flux 1.8% is good for soldering, 0.6mm diameter for good joints to prevent component overheating.
  • Easy to carry: you can take the solder wire anywhere with your pocket. And the plastic tube will protect solder from dirt and moisture(WARNING: This product can expose you to lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to the official Proposition 65 Warnings Website).
  • Wide application: the rosin core solder wire is designed for electrical repairs, such as radios, TVs, VCRs, stereos, wires, motors, circuit board and other electronics devices.
Check Stock

DEKIEVALE 22 Gauge 3 Conductor Electrical Wire, 32.8FT Black Stranded Low Voltage 22\\/3 Cable PVC Case, 22 AWG Tinned Copper 3 Wire Cable, Flexible Extension Power Cord for LED RGB Strips Lamp Lighting

  • 【Product Specification】22 Gauge 3 conductor wire(Red & Black & yellow). 32.8ft/10M. Maximum input voltage: 300V. Maximum current: 5A. Rated working temperature up to 80℃/176℉. Material:PVC+Tinned Copper..
  • 【High Conductivity】22 gauge electrical wire has 17 strands of tinned copper wire inside each cable. The high-precision oxygen-free copper contained in tinned copper has lower resistance and higher conductivity. Tin plating makes it easier to solder..
  • 【Durable Material】The extension cord has an even thickness PVC bush to protect the cord from fraying. It has the characteristics of flame retardant, safety and stability, anti-aging, acid and alkali resistance, moisture resistance etc. The copper core have a high melting point and is not easy to melt..
  • 【Wide Application】22/3 low-voltage cable extension cord are connected flexibly during use, easy to strip, easy to solder, easy to cut, and can be used as extension cords or connecting wires to be widely used in led light strips, electrical and electronic equipment, transformers, LED splitter connections, automobiles, speakers Line and other 5V/12V/24V low voltage products..
  • 【Risk-Free】DEKIEVALE is here to promise that our wires are produced with exquisite craftsmanship.....
Check Stock

AUSTOR 6 Pack 60-40 Rosin Core Solder, Solder Wire Tin Lead Electrical Soldering Tools Diameter 0.8mm, 20g

  • High quality: good solder ability in both electrical conductivity and thermal conductivity, working quickly, and suitable for various kinds of soldering iron.
  • Easy to use: flows well and heats evenly, the melting point of soldering iron wire is 185°C - 190°C (365°F - 374°F).
  • Relative parameters:60% Tin and 40% Lead are apply for electronic assembly perfectly. 1.8% flux is good for soldering, diameter 0.8mm is good joint and avoid components overheating.
  • Easy to carry: you can take the solder wire anywhere in your pocket. And the plastic tube protect solder from dirt and moisture(WARNING: This product can expose you to lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to the official Proposition 65 Warnings Website).
  • Wide application: the rosin core solder wire is designed for electrical repairs, such as radios, TVs, VCRs, stereos, wires, motors, circuit board and other electronics devices.
Check Stock

MAIYUM 63-37 Tin Lead Rosin Core Solder Wire for Electrical Soldering 0.8mm 50g

  • √ Tin Lead Solder Wire: High Quality Rosin Core Solder Wire.
  • √ Parameters: solder wire Tin 63%- Lead 37% (Sn63-Pb37).
  • √ Flux content 1.8%，electrical soldering wire dia is 0.8mm (0.0315inch)，gross weight 50gram (0.11lbs),good size for pocket.
  • √ Low Melting Point: 361F/183C. easy to be soldered, flows smoothly, soldering fast and strong soldering point..
  • √ Applications: Very good soldering capability, esp for circuit board, DIY, home improvement, Repairation of cable/TV/Radio/sterro/ Toys and other electrical devices etc. (WARNING: This product can expose you to lead, which is known to the State of California to cause brith defects or other reproductive harm. For more information go to the offical Proposition 65 Warnings Website).
Check Stock