Tabiger Solder Wick & Desoldering Pump, Solder Sucker & Desoldering Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length)- Desoldering Vacuum Pump Solder Remover
- 【One-handed solder sucker with powerful suction 】 Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
- 【Desoldering Wick with copper braid】 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area..
- 【ABS body with non-slip sponge and Nylon nozzle desoldering pump】 The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time..
- 【3-in-1 Solder Removal Tool】 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while....
Check Stock
Mogaopi Desoldering Wick, Desoldering Pump, Solder Sucker, Solder Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length) Solder Wire, Replacement Tip, Desoldering Vacuum Pump Solder Removal Tool
- 【6-in-1 Solder Removal Tool】: 2 pcs Desoldering Wire, 1pcs Solder Wire, 1pcs Desoldering Pump, 1pcs Replacement Tip, 1pcs Protective Tube(15cm Length), a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts..
- Desoldering Wick with Copper Braid - Solder wire, replacement tip, 2pcs solder braid (3.5mm/2.0mm Width, 1.5m Length). 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder..
- 【One-handed solder sucker with powerful suction】: Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
- ABS Body with Non-slip Sponge and Nylon Nozzle Solder Wick - The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold. Right or Left handed design allows easy one-handed use..
Check StockLampVPath (Pack of 4) All Aluminum Alloy Solder Sucker Desoldering Pump, Vacuum Solder Sucker Removal Tool for Desoldering
- 4 pcs solder suckers are included in the package..
- The body frame of the desoldering solder sucker is aluminum, the buttons and head of the desoldering pump is made of hard plastic..
- This solder sucker tool is one-handed use designed: it can be handled easily with one hand, whatever left or right hand, just hold the desolder pump and only use your thumb to set position and trigger to operate..
- This solder remover has the powerful suction, the high pressure vacuum can remove solder from a printed circuit board effectively..
- This solder removal tool is lightweight and compact. Weight: 29g/1.02oz.
- Size(Length*Diameter):7.32Inch/18.6CM*0.75Inch/1.9CM.
Check Stock
Desoldering Gun, Solder Sucker Desoldering Iron Electric Desoldering Tool with Desoldering Nozzles, Solder Wick, Soldering Tip and Cleaning Pin (Blue)
- 【Desoldering Gun】No need to operate the soldering iron with one hand and the solder sucker pump with the other any more, our electric desoldering gun combines heating and desoldering functions that ensure you an easy and comfortable way to one-hand operation, and the deflector can reduce the heat from transferring to your hand when using the solder suck. This solder sucker kit will give you a smooth working experience in a time-consuming desoldering project..
- 【No Jam&Easy to Clean】Compact and lightweight to carry everywhere, non-slip grip to meet a perfect touch, plug and play and no need a soldering station, let this full upgraded desolder kit be your best helper for desoldering work. The powerful heating system and solder extraction design of the desolder gun ensure you desoldering without jam. Cleaning is also quick and easy, just lift and pull out the scrap solder storage tube and clean the solder out completely without mess..
- 【Perfect Desoldering Tool】 You will get a eletric vacuum desoldering iron, a solder wick, a cleaning sponge, a cleaning Pin, 2 interchangeable diameters (φ1.0mm & φ1.2mm) desoldering nozzles for different sizes of through-hole components, and a solder tip for transforming this electric solder sucker into a ....
Check StockBlue Solder Sucker Desoldering Pump Sucking Vacuum Desoldering Pump with Teflone Tip 13 Solder Sucker Silicone Desoldering Tool Desoldering Pumps
- HIGH QUALITY The solder sucker has high quality plastic material, high temperature heat-resisting during long term use. 13 inch long....
- DESIGN Designed in color blue and orange plastic. Heavy-duty solder remover has anti-skid design. Solder pump is easy to hold and use. Desolder pump....
- EASY TO USE You can use the desoldering wick pump just by Cocking the pump's mechanism by pushing down on the table with your non-soldering hand.....
- AMBIDEXTROUS Simple design construction of the solder sucking vacuum makes it comfortable to use with either hand. Everyone can use soldapult easily.
- SOLDER REMOVAL KIT Use the solder sucker for wide as well as very small and hard to reach places. Desolador can be used to fix all small PCB board....
Check StockVIRALLOY Solder Sucker No Clog Desoldering Pump Perfect Desoldering Tool for Solder Remover with Strong Vacuum Suction Heat Resistant Taper Nozzle for Smooth Solder Inrush & Pre-cut Silicone Tubes
- ✅ No Clog Design: The VIRALLOY Solder Sucker Desoldering Pump has a unique design that prevents clogging of the nozzle tip. This allows you to quickly remove solder without having to stop and clean out the nozzle tip.
- ✅ Streamlined: The solder removal tool quickly extracts molten solder and leaves a clean working area.
- ✅ Sturdy: This solder pump sucker is built with premium 6061 aircraft-grade aluminum for maximum durability.
- ✅ Self-Cleaning: Pressing plunger cleans the nozzle unit ejecting solder waste from the desolder pump.
- ✅ Convenient: Aluminum desolder tool designed to be easily used with one hand, leaving the other free to manipulate the board or heat source.
Check Stock
AUSTOR Desoldering Sucker and 6 Pcs Solder Braid Wick 2.0mm/2.5mm/3.0mm Width 1.5m Length with Flux - Desoldering Vacuum Pump Solder Removal Tool
- High efficiency solder sucker - the desoldering pump designed with double ring and "vacuum" open button, you can remove solder from circuit board effectively by cocking it and pressing the trigger button with one hand.
- Desoldering braid wick with rosin - 6 pieces copper solder braid in 3 size, width 2.0mm/2.5mm/3.0mm, length 1.5m, 2 pieces for each size.
- geometrically-precise weave, can be used to clean the spare solder on the pin away to avoid short circuit, to meet your various of soldering needs.
- High quality material - the desoldering pump body made of premium quality ABS material, with non-slip sponge and nylon nozzle, anti-static, heat resistant and durable.
- Wide application - correcting mistakes on small PCB boards, removing relays and other components from printed circuit boards, cleaning small components, re-soldering and desoldering.
- 7-in-1 solder removal tool - 1pcs solder sucker and 6pcs solder wicks in 3 size.
Check StockSolder Sucker Desoldering Pump Sucking Vacuum Desoldering Pump with Teflon Tip 7.5 Solder Sucker Silicone Desoldering Tool Desoldering Pumps Black
- Solder sucker desoldering pump made of high-quality ABS plastic with aluminum alloy, soft anti-skid handle of sucking vacuum desoldering pump,....
- Desoldering pump is the most easy solution for removing solder, the desoldering pump designed for one-hand operation, durable and ideal for circuit....
- The teflon nozzle of desolder pump can withstand high temperature, anti-static, heat-resistant, durable, special design, convenient for one-handed use.
- Desoldering pump solder sucker is suitable for correcting errors on PCB boards, cleaning small components, resoldering and desoldering circuit boards,....
- Solder pump adopts high-efficiency tin scraping method, which is easy to remove tin debris from the suction nozzle and not easy to block.
Check Stock
TOWOT Desoldering Pump Solder Sucker,2PCS Desoldering Vacuum Pump Solder Remover Tool
- Solder Sucker with Super Suction: With a desoldering pump designed with a double ring and a "vacuum" button, you can easily remove the solder on the circuit board by tilting it up and pressing the button with one hand..
- High-Quality Materials: The desoldering vacuum pump is made of high-quality ABS material, coated with a sponge, non-slip and heat-absorbing, nylon nozzles, anti-static and heat-resistant. Comfortable grip and durable..
- Widely Used: Desoldering pumps can be used to correct small board errors on the PCB, re-soldering and desoldering, removing relays and other components from the printed circuit board, etc. To meet your various soldering needs..
- Best assistant: Solder pump adopts high-efficiency tin scraping method, which is easy to remove tin debris from the suction nozzle and not easy to block. The solder sucker can be used for both broad and small places, hard to reach areas..
- Value Package: 2PCS desoldering pump , commonly used soldering tools, improve your work efficiency. 30 days no reason to return or exchange, please feel free to contact us if you have any questions!.
Check Stock
TOWOT Desoldering Pump Solder Sucker,3PCS Desoldering Vacuum Pump Solder Remover Tool
- Solder Sucker with Super Suction: With a desoldering pump designed with a double ring and a "vacuum" button, you can easily remove the solder on the circuit board by tilting it up and pressing the button with one hand..
- High-Quality Materials: The desoldering vacuum pump is made of high-quality ABS material, coated with a sponge, non-slip and heat-absorbing, nylon nozzles, anti-static and heat-resistant. Comfortable grip and durable..
- Widely Used: Desoldering pumps can be used to correct small board errors on the PCB, re-soldering and desoldering, removing relays and other components from the printed circuit board, etc. To meet your various soldering needs..
- Best assistant: Solder pump adopts high-efficiency tin scraping method, which is easy to remove tin debris from the suction nozzle and not easy to block. The solder sucker can be used for both broad and small places, hard to reach areas..
- Value Package: 3PCS desoldering pump , commonly used soldering tools, improve your work efficiency. 30 days no reason to return or exchange, please feel free to contact us if you have any questions!.
Check Stock
Solder Sucker Desoldering Pump Sucking Vacuum Desoldering Pump with Teflone Tip 13 Solder Sucker Silicone Desoldering Tool Desoldering Pumps Blue Soldapullt
- SOLDER REMOVAL KIT The solder sucker can be used for both broad and small places, hard to reach areas, can be used to correct all mistakes with small boards on PCBs, remove relays and other components from printed circuit boards.
- DESIGN Designed in color blue and orange plastic, has anti-skid design so it is easy to hold and use. Heavy-duty, Length:13", Diameter: 1.65", Tip Diameter: 0.32".
- EASY TO USE You can use the desoldering wick pump just by Cocking the pump's mechanism by pushing down on the table with your non-soldering hand. Teflon (PTFE) nonstick coating tip and cushioned shock reduction minimize board damage.
- HIGH QUALITY The solder sucker has high quality plastic material, high temperature heat-resisting during long term use. 13 incg long corrosion-resistant plastic body and flexible silicon tube.
- AMBIDEXTROUS Simple design construction of the solder sucking vacuum makes it right and left-handed, so everyone can use it easily.
Check StockGEZICHTA 30W 120V Electric Vacuum Solder Sucker Iron Tool Desoldering Pump Iron Gun Soldering Tools,Automatic Suction tin Tools
- Tools: Perfect desoldering tool for thick-film integrated circuits and large components with big welding joints..
- Package: Our package come with an electric vacuum solder sucker, a cleaning rod, a cleaning rod, and 3pcs suction nozzle(1.0mm,1.5mm, 2.5mm).
- Useful: Lightweight,high efficiency,strong suction capabilities..
- Portable: The electric vacuum solder sucker length is about 280mm, it is compact,very stable..
- Material:Made of stainless steel and high-temperature resistance plastics, it is practical and durable.
Check StockWitonics Capacitor Replacement Kit for Samsung BN44-00197A with Soldering Tools
- Anti-static solder sucker/desoldering pump (Model#: 2309ZX).
- 7 high-temperature capacitors, not including the large 400-450V capacitors.
- 7 inches solder wire (lead-free), 4 inches of solder wick.
Check Stock
