Lesnow solder wick Braid With Flux 3mm/0.12" Width 10' Length, No-Clean Desoldering Wick Braid Remover tool, Soldering Wick Disassemble Electrical Components,copper desolder wick Braid
- The braided solder wicks are suitable for labs, home and industry welding work,can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.
- This desoldering wick has geometrically-precise weave with copper wires with nice quality and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area..
- 1 pieces of no-clean solder wicks, each wick is about 10ft long and 0.12 inch in width, enough quantity and length for your daily needs.
- If you are using the solder wick for the first time, it is recommended to use a multi-point flux to assist in cleaning，At the same time, in order to prevent burns, do not directly touch the solder core at close range during use..
- If for any reason you are not 100% satisfied with lesnow solder cores, we sup....
Check Stock
Solder Wick Braid Copper Wire with flux 10 ft 3M Length X 2.5mm Width I Desoldering Wire I Solder Sucker I Solder Remover I Soldering Iron I Solder Braid for Circuit Board 1pcs
- ✔️EXCELLENT QUALITY : Our No-clean Desoldering Wick Wire is made of Ultra-thin 100% pure braided copper. Free impurity and oxide-free desoldering wick that contains 2% RMA (Rosin Midly Activated) flux..
- ✔️ENOUGHT QUANTITY: The package includes high quality desoldering wick wire 10 ft(3M) long x 2.5 mm width, Twice as more as standard solder wicks. Its fine geometrical design makes the molten solder wicks away quickly and efficiently. Enough for your daily work needs..
- ✔️LOW RESIDUE : No-clean desoldering wick leaves halide-free, non-conductive, non corrosive environmental friendly residues, RoHs compliant. No need to clean surface after desoldering process..
- ✔️GREAT PROPERTIES: Design with strong capillary action resulting in increased absorption of solder excess. Less heat neccesary by its excellent thermal conductivity. Job done faster and efficiently without damaging circuit board sensitive pads, welding points or SMD components..
- ✔️SCOPE OF APPLICATION: For all kind of electronic circuit boards, replace faulty components, Clean joints and pads, remove excess solder, correct solder bridges, Clean excess solder from PCB during solder, desolder, rework or reflow process..
Check Stock
TABIGER Desoldering Wick & Desoldering Pump, 3 Pcs Solder Sucker & 2 Pcs Solder Wick(2.5mm Width, 1.5m Length), Solder Remover Kit for Desoldering
- 【ONE-HANDED USE DESIGN】 The Solder sucker with simple construction, so whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready..
- 【HIGH QUALITY AND POWERFUL SUNCTION】 The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively..
- 【ALLOY BRAIDED SOLDER WICK】 Precision weaving solder braid with the size 2.5mm Width, 1.5m Length, it could help clean the spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas..
- 【DURABLE DESOLDERING IRON TOOL】 The body of desoldering pump is made of aluminum, which can resistance to beat, corrosion and have good heat dispersion, the desoldering wick has geometrically-precise weave with copper and rosin, which show no nicking or bending after a long time..
- 【A MUST-HAVE SOLDER REMOVAL KIT】 The solder sucker can be used for broad place, which the solder wick can be used for small, hard to reach areas, all together can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards..
Check StockSRA Soldering Wick with Flat Woven Copper Desoldering Braid Strip and No Clean Flux for Easy Damage-Free Solder Removal - 3 Pack of 10 Foot Solder Wick Spools
- 10ft Super Sized Desolder Spools: 30 Feet of standard width .098" desoldering wick infused with no-clean flux for fast and efficient solder wicking action..
- High Quality Materials: Impurity-free woven copper desolder braid construction with 3% no-clean flux provides superior conductivity, even at low temperatures..
- Easy to Use: Simply place desolder wick over work and apply heat to remove solder from parts and terminals, break solder bridges, and correct other soldering mistakes..
- Fast & Effective Wicking: Unique gap-weave coated solder wick braid absorbs solder quickly like a sponge, reducing the likelihood of overheating and lifted pads..
- PCB Safe Residues: Desolder wick leaves little flux residue that is non-conductive and non-corrosive so it requires no cleaning. This product is also RoHs compliant..
Check Stock
CCOZN Solder Wicks, 3 Pack No-Clean Solder Braided Wicks Desoldering Wicks For Solder Removal Tool, 0.12/0.1/0.08 Inch Width 1.5 Meter Length
- ☃[Package Include] You will get 3 packs No-Clean Solder Braided Wicks.
- ☃[Appropriate Size] Package includes 1 pack 2.5mm x 1.5m / 0.1inch x 5 ft solder wick, 1 pack 2.0mm x 1.5m /0.08inch x 5ft solder wick, 1 pack 2.0mm x 1.5m /0.08inch x 5ft solder wick..
- ☃[Premium Material]The Braided Desoldering Wicks are made of 100% copper wires with fine braid design.Using flat stitch weaving, fast heat conduction, anti-hot, strong capillary action to pull in excess solder..
- ☃[Solder Braided Wicks]The solder wicks with no-clean design to make sure that just little residues left behind and the residues are halide free, non-corrosive and non-conductive, greatly saving working time..
- ☃[Applicable Occasions] The no-clean desoldering wicks are suitable for industry welding, labs work or home work.Not only improves work efficiency, but also does not damage the PCB board.Suitable for re-soldering and desoldering..
Check Stock
Harris SCLF16 Stay Clean Soldering Flux, 16 oz.
- Nice Combination: the package comes with 1 solder wire, 1 no clean solder wicks, 1Soldering Flux & 6 welding auxiliary tools, enough quantity and practical toolset for welding and desoldering requirements.
- 6 Welding Auxiliary Tools: To meet the welding operation requirements of press, cutting, scraping, hooks brushes, fork. Also, it can be applied to integrated circuit assembly and disassembly, precision electronic components.
- Safe Rosin Paste Flux: Refined with weak acid flux, semi-solid, and not easy to pour. The most suitable flux for hobby and electronic assembly. Good for cables and large terminals. Removes oil or oxides, and improves wettability.
- Solder Wick & Solder Wire: No-Clean solder wick braid will just leave little residues after use and the residues are non-conductive and non-corrosive. Solder wire has a low melting point, flows smoothly, has fast soldering speed, and has strong solder joints.
- Multifunctional Welding Kit: Ideal for repairs, auxiliary welding, and assembly work. For precision welding repair work such as fixing, removing, cleaning, etc., making the work easier.
Check Stock
No Clean Soldering Flux Pen and Solder Remover Wick, 0.1 Inch Wide and 59 Inch Long, Solder Braid Wick Liquid Solder Flux Pen for Electronics Welding Repair Tabbing Wire Maintenance (6 Pieces)
- Package includes: you will receive 3 pieces of no clean solder flux pens, and 3 pieces of soldering braided wick, in total of 6 pieces, sufficient quantity and a considerate combination to meet your needs for daily use and replacement.
- Suitable size: the rosin flux pen measures about 14.3 cm/ 5.6 inches in length, and the solder braided wick is about 1.5 m/ 59 inches long and 2.5 mm/ 0.1 inches wide, which is convenient to hold in hand.
- Please check the size carefully before purchasing.
- Quality material: these no-clean soldering wicks are made of quality copper wire and adopt precise weaving technology, which can enhance tension on the surface to absorb excess solder.
- The liquid solder pen is made of reliable materials, no leaking and safe for protecting the flux, preventing you from touching the organic solvents.
- Practical tools: 10-ml solder flux pen with soft brush tip can release the liquid flow moderately, which can clean the components without harming the PCB board copper foil or IC pin.
- The solder remover wick features good thermal conductivity and absorption, useful to reduce the risk of thermal injury to the circuit boards.
- Wide applications: these flux pens and braided solder wicks can be applied for laboratory, computer, home repairs and ....
Check StockSoldering Iron Kit Electronics 21-in-1 60W Adjustable Temperature Soldering Iron 5pcs Soldering Iron Tips Soldering Iron Stand Desoldering Pump Magnifier Solder Wire Tweezer PU Carry Bag
- 【21-in-1 Soldering Iron KIT】Soldering iron kit comes with soldering iron, solder wire, desoldering pump, solder wick, stand with cleaning sponge,....
- 【HEAT UP QUICKLY and HEAT DISSPATION EFFICIENCY】60 watts, heat up quickly(2 minutes or so). Adjustable temperature with thermostat range....
- 【DURABLE SOLDER WICK& DESOLDERING PUMP】The solder wick is 2.0mm wide, 1.5m in length, 0.4oz in weight and is easy to clean residue flux,....
- 【PORTABLE STORAGE PU CARRY BAG】The multifunctional tool PU carry bag is rather convenient to store small tools. Which can avoid losing the....
- 【RANGE of APPLICATION】The soldering iron sets are the best gift idea for DIY, various repaired usage of electronics and chipboards, welding,....
Check StockNTE Electronics SW02-10 No-Clean Solder Wick 4 Blue.098 Width 10 Length
- Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes.
- Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board.
- 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder.
- Available with standard or anti-static bobbins.
Check Stock
Herain No-Clean Solder Wick Desoldering Braided Wicks with Flux Desoldering Wicks Removal Tool Solder Sucker Desoldering Wick Used to Remove the Solder and Disassemble Electrical Components
- 1.High-quality materials: The solder wick is geometrically precisely braided with high-quality copper wire, which is resistant to oxidation and corrosion, has good thermal conductivity, low residual and no halide, and clean tin absorption..
- 2.Geometric braid design: The desoldering wick adopts a precise geometric braid design, which ensures a large surface tension and tin absorption ability, and reduces the risk of thermal damage to the circuit board..
- 3.Widely used: No-clean solder braid is suitable for welding work in laboratories, industries, schools and homes, It is suitable for all kinds of electronics, electrical appliances, precision instruments and meters. It can absorb tin quickly and a large amount of tin, and is dedicated to remove excess solder..
- 4.Easy to use: Desoldering braid is used to absorb excess solder when removing tin, the fine woven design promotes strong capillary action to suck in excess solder. The main board desoldering spot is removed, and it is used with the soldering station..
- 5.Ingenuity quality: 1 piece of no-clean solder braided wicks (0.078 inch wide, 9.84 ft length), which is sufficient to meet your work requirements. If you have any product questions, you can contact us at any time..
Check StockWitonics Capacitor Replacement Kit for Samsung BN44-00197A with Soldering Tools
- Anti-static solder sucker/desoldering pump (Model#: 2309ZX).
- 7 high-temperature capacitors, not including the large 400-450V capacitors.
- 7 inches solder wire (lead-free), 4 inches of solder wick.
Check StockWitonics Capacitor Replacement Kit for Samsung BN44-00197A V1 with Soldering Tools
- Anti-static solder sucker/desoldering pump (Model#: 2309ZX).
- 16 high-temperature capacitors, not including the large 400-450V capacitors.
- 7 inches solder wire (lead-free), 4 inches of solder wick.
Check Stock
10 Pieces No Clean Soldering Flux Pen and Solder Remover Wick, 0.1 Inch Wide and 59 Inch Long, Solder Braid Wick Liquid Solder Flux Pen for Electronics Welding Repair Tabbing Wire Maintenance
- Nice combination: you will get 5 no clean soldering flux pens and 5 solder remover wick sets, 10 in total, sufficient quantity, thoughtful combination, to meet daily use and replacement needs.
- Appropriate size: the no-clean solder wick is about 1.5 m/ 59 inches long and 2.5 mm/ 0.1 inches wide, and liquid flux brush flux pen is about 15 x 1.5 cm/ 6 x 0.6 inch, convenient to hold.
- Please check the size carefully before purchasing.
- Multiple reliable materials: these no-clean braided soldering wicks are made of quality copper wire, using nice weaving technology, which can enhance surface tension and absorb excess solder.
- And flux remover pen adopts quality material, non-leakage, flux safe and prevents you from being exposed to organic solvents.
- Practical tools: soft brush tip flux pen releases a moderate stream of liquid to clean components without spoiling the PCB copper foil or IC pins.
- Solder remover has good thermal conductivity and absorption, helping to reduce the risk of thermal spoiling to the board.
- Broad utilization: these flux pens and braided solder wicks can be applied in laboratories, computers, home repairs and to correct small PCB errors and through-hole joints, electronic soldering and much more, bringing a lot of convenience and effic....
Check Stock
