Categories

Best Soldering Smoke Absorber

Aoyue 701A++ Dual Function Digital Soldering and Desoldering Station with a Smoke Absorber

  • ◆ HIGH PERFORMANCE - 70 watt High Powered Desoldering Station with a long life Ceramic heating element. 70 Soldering iron with Smoke Absorber to keep fumes away. Atmega8A Microprocessor from Microchip and a proprietary software proportional control of the temperature. Very easy intuitive user interface with large LED Display..
  • ◆ BUILT FOR SAFETY - The tools has zero crossing circuitry to prevent electrical surges. CE Certified and ESD Safe. Uses low voltage for the soldering and desoldering irons and vacuum pump..
  • ◆ INTELLIGENT FUNCTIONS - It has several advanced features such as digital calibration and configurable auto sleep function that is adjustable from 1-60 minutes..
  • ◆ VERSATILE SOLDERING IRON STAND - The configurable stand can be setup with the spool holder on either side of the station and there is an optional sponge holder. The stand will fit any of the available irons..
  • ◆ WHAT YOU GET - 1 x Aoyue 701A++ Station ,Desoldering iron, Soldering iron with Smoke Absorber, 3 desoldering tips(1 installed in the iron), Cleaning Tools, 1 x Spare Spring, 6 Spare Filters, 1 x tube of Grease, 1 x User manual, 1 x power cord.
Check Stock

Solder Smoker Absorber Remover Fume Extractor Smoke Prevention Absorber DIY Working Fan Soldering with spare Carbon filter

  • Solder Smoke Absorber/Fume Remover/Smoke Extractor Prevention Absorber DIY Working Fan for Soldering Station..
  • It adopt the high performance fan with low noise, and the suction is strongThe structure is simple. The replacement of the activated carbon filter....
  • Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. Long-lasting working time for over 50,000 hours..
  • Comes with 5 Active carbon filters. The filter is made of special foam with refined activated carbon, which has high suction and flux absorption....
  • It's a good helper for mobile phone maintenance, great for electronics, arts and crafts, stained glass work, soldering station work..
Check Stock

KOTTO Solder Smoke Absorber Remover Fume Extractor Smoke Prevention Absorber DIY Working Fan Third Hand Soldering Tool PCB Holder Four Magnetic Based With Iron Holder Combo

  • Solder Smoke Absorber/Fume Remover/Smoke Extractor Prevention Absorber DIY Working Fan for Soldering Station 0.4 inch thick activated carbon filter....
  • Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. 4 non-slip heavy duty rubber feet anchors the unit to....
  • 'Third Hand' workshop handyman vice – Ideal for Soldering, Circuit board holder, Assembly, Repair, Modeling, Hobby, Jewelry, Crafts. Four adjustable....
  • Weighted base and Anti-Split rubber feet: Solid weighted steel construction, power coated with industrial grade rubber feet ensures a stable base that....
  • Perfect for various projects – You can use our helping hands for all kinds of jobs, many customers use for hobby projects, electronics, arts and....
Check Stock

KOTTO Strong Suction Hose Fume Smoke Absorber for Soldering, Electric Iron Welding, 3d Printing Extractor Absorber Remover DIY Extractor Carbon or HEPA Filter [Updated, Hose pre-attached]

  • Soldering Smoke Absorber, Electric Iron Welding Fume Extractor Soldering Smoke Absorber Remover DIY Fume Extractor Filter with Strong Suction..
  • A 24-inch flexible tube, Fume hood can adjust direction according to actual needs..
  • Adjustable optimized 6000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. The fan speed is adjustable. Suction: 40W, 6000 RPM, 52CFM, Noise Level: 55dbm, Life Expectancy: 50,000 hours, Static pressure: 125mmH2O..
  • Easy to replace the filter, Includes one replacement filter. Working temperature: -20℃～60℃, Power consumption: 120V-240V, 40W ( 12V, 4A Power supply)..
  • US-based customer support, 30 days full satisfaction no question asked return period..
Check Stock

Aoyue 968A+ SMD Digital Hot Air Rework Station

  • 4 in 1 repairing station with a Hot Air, a 70Watt Soldering Iron, vacuum pickup and a Smoke Absorber.
  • Maintains a constant set temperature when the set and the value is reached.
  • Digital display for the Hot Air of the actual and set temperatures with touch control.
  • Built in Air Flow gauge and knob adjustment for the air flow.
  • Digital Display for soldering iron and a digital calibration and auto sleep function.
Check Stock

SXDOOL Solder Smoker Absorber Remover Fan with Speed Controller,Fume Extractor Smoke Prevention,120mm 120V Cooler Adjustable

  • High airflow cooling fans designed for Solder Smoke Absorber/Fume Remover/Smoke Extractor Prevention Absorber.
  • Features a fan speed controller so you can optimize the airflow and noise for your application..
  • Dual ball bearing design allows the fan continuous operation 24/7 without too much of dust and high temperature concern and have a lifespan of 50,000....
  • Comes with 3pcs 120mmX120mmX3mm Active carbon filters,easy to replace. The filter is made of special foam with refined activated carbon, which has....
  • Great for mobile phone maintenance, great for soldering station work,electronics, arts and crafts, stained glass work, ..
Check Stock

KOTTO Solder Smoke Absorber Remover Fume Extractor Smoke Prevention Absorber DIY Working Fan for Soldering Station with 5 Pack Carbon Filter

  • Solder Smoke Absorber/Fume Remover/Smoke Extractor Prevention Absorber DIY Working Fan for Soldering Station.
  • 0.4 inch thick activated carbon filter absorbs and captures fumes from solder, flux, chemicals, gases and helps to prevent dissipation into the room..
  • Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. 4 non-slip heavy duty rubber feet anchors the unit to....
  • Easy to replace filter, Includes one replacement filter. Working temperature: -20℃～60℃, Power consumption: 120V, 30W (50 / 60Hz)..
  • US based customer support, 30 days full satisfaction no question asked return period..
Check Stock

Soldering Iron Station with Fume Extractor 80W Soldering Station 60W Soldering Iron Smoke Absorber Solder Wire LED Lighting Fast Heating Auto Sleep Soldering Station LCD Digital Display

  • ➤【Multifunction】: Soldering iron kit including soldering station and fume extractor with LED light is a fully functional combination. Equipped....
  • ➤【Perfect 12-in-1 soldering kit】: 1 x 80-Watt soldering station, 1 x fume extractor, 5 x soldering tips, 1 x holder for soldering iron, 1 x....
  • ➤【High power & high precision & auto sleep mode】: The combination soldering station is with 80W high power, fast heating up, takes 30 seconds to....
  • ➤【Fume extractor】: The foldable and angle-adjustable smoker absorber removes solder smoke efficiently to create a safer working condition. Low....
  • ➤【We support you】: This appliance has passed certifications of FCC, C-TUV-US, CE, GS, EMC, ROHS and REACH. Noah provides 1-year warranty for....
Check Stock

Aoyue 701A++ Dual Function Digital Soldering and Desoldering Station with a Smoke Absorber - 220 Volts

  • Independent Solding iron and desoldering gun.
  • 24 volt output to prevent circuit damage from the iron.
  • Digital Control with Digital Calibration.
  • 70 Watt soldering iron with Smoke Absorber.
Check Stock

Aoyue 968A+ Professional SMD Digital Hot Air Rework Station with a Soldering Iron and Vacuum Pickup

  • HIGH PERFORMANCE - 550 Watts(highest in the market) of heating power and has a long life metal heater for the Hot Air. Very Quick heat up and a built in air flow gauge. Large Volume air pump that has a maximum flow of 23L/min with adjustable air flow. There is a powerful 70 Watt soldering iron for fast responsive soldering. There is a built in smoke absorber on the soldering iron to remove fumes to keep you safe..
  • MULTI-TOOL CAPABILITY - SMD Reworking tool designed to remove and/or repair surface mounted devices such as SOIC, CHIP, QFP, BLCC, BGA, and so on. There are 50+ nozzles sizes available. 5 Nozzles are included (1124,1130,1196,1197, 1313). Also contains an assortment of 10 soldering iron tips. Also a powered vacuum pickup tool is included and can be used to pickup small IC's..
  • INTELLIGENT FUNCTIONS - It has several advanced features such as the auto nozzle cooling process after reworking, auto sleep function when placed in the hot air holder. Digital display of hot air set and actual temperature. Microprocessor controlled with self-testing hot air heating core system which warns user when aging or breakdown of the heating core occurs. Digital calibration of the soldering iron..
  • VERSATILE SOLDERING IRON STAND - The configurable stand can be setup....
Check Stock

Aoyue 738H High Performance SMD Digital Hot Air Rework Station, 5 in 1 station has Hot Air, a 70 Watt Soldering Iron, Soldering Tweezers

  • ◆ HIGH PERFORMANCE - 500 Watts of heating power and has a long life metal heater for the Hot Air. Very Quick heat up and a built in air flow gauge. Large Volume air pump that has a maximum flow of 23L/min with adjustable air flow. There is a powerful 70 Watt soldering iron for fast responsive soldering. All this is controlled through the Atmega16A microcontroller. There is a built in smoke absorber on the soldering iron to remove fumes to keep you safe..
  • ◆ MULTI-TOOL CAPABILITY - SMD Reworking tool designed to remove and/or repair surface mounted devices such as SOIC, CHIP, QFP, BLCC, BGA, and so on. There are 50+ nozzles sizes available. 5 Nozzles are included (1124,1130,1196,1197, 1313). Also contains an assortment of 10 soldering iron tips. Also a powered vacuum pickup tool is included and can be used to pickup small IC's. Macro Heater Tweezers and a toolbox to holde all the accessories.
  • ◆ INTELLIGENT FUNCTIONS - It has several advanced features such as the auto nozzle cooling process after reworking, auto sleep function when placed in the hot air holder, Temperature scale selectable between Centigrade and Fahrenheit. Digital display of hot air set and actual temperature. Microprocessor controlled with self-testing hot air heating core system ....
Check Stock

MIYAKO USA Soldering Iron Tweezers Style, Rework Station 110V 60W Desoldering Soldering Tweezer Style Iron, Tweezer Style Soldering Iron with Ceramic Heater (74B402)

  • ◆ HIGH PERFORMANCE - 500 Watts of heating power and has a long life metal heater for the Hot Air. Very Quick heat up and a built in air flow gauge. Large Volume air pump that has a maximum flow of 23L/min with adjustable air flow. There is a powerful 70 Watt soldering iron for fast responsive soldering. All this is controlled through the Atmega16A microcontroller. There is a built in smoke absorber on the soldering iron to remove fumes to keep you safe..
  • ◆ MULTI-TOOL CAPABILITY - SMD Reworking tool designed to remove and/or repair surface mounted devices such as SOIC, CHIP, QFP, BLCC, BGA, and so on. There are 50+ nozzles sizes available. 5 Nozzles are included (1124,1130,1196,1197, 1313). Also contains an assortment of 10 soldering iron tips. Also a powered vacuum pickup tool is included and can be used to pickup small IC's. Macro Heater Tweezers and a toolbox to holde all the accessories.
  • ◆ INTELLIGENT FUNCTIONS - It has several advanced features such as the auto nozzle cooling process after reworking, auto sleep function when placed in the hot air holder, Temperature scale selectable between Centigrade and Fahrenheit. Digital display of hot air set and actual temperature. Microprocessor controlled with self-testing hot air heating core system ....
Check Stock

Hakko FA430-KIT1 Smoke Absorber with C1571

  • 3-airflow adjustment modes: High, Medium, Low.
Check Stock