Categories

Best Soldering Wire With No clean Flux

10 Pieces No Clean Soldering Flux Pen and Solder Remover Wick, 0.1 Inch Wide and 59 Inch Long, Solder Braid Wick Liquid Solder Flux Pen for Electronics Welding Repair Tabbing Wire Maintenance

  • Nice combination: you will get 5 no clean soldering flux pens and 5 solder remover wick sets, 10 in total, sufficient quantity, thoughtful combination, to meet daily use and replacement needs.
  • Appropriate size: the no-clean solder wick is about 1.5 m/ 59 inches long and 2.5 mm/ 0.1 inches wide, and liquid flux brush flux pen is about 15 x 1.5 cm/ 6 x 0.6 inch, convenient to hold.
  • Please check the size carefully before purchasing.
  • Multiple reliable materials: these no-clean braided soldering wicks are made of quality copper wire, using nice weaving technology, which can enhance surface tension and absorb excess solder.
  • And flux remover pen adopts quality material, non-leakage, flux safe and prevents you from being exposed to organic solvents.
  • Practical tools: soft brush tip flux pen releases a moderate stream of liquid to clean components without spoiling the PCB copper foil or IC pins.
  • Solder remover has good thermal conductivity and absorption, helping to reduce the risk of thermal spoiling to the board.
  • Broad utilization: these flux pens and braided solder wicks can be applied in laboratories, computers, home repairs and to correct small PCB errors and through-hole joints, electronic soldering and much more, bringing a lot of convenience and effic....
Check Stock

SFC TOOLS Standard Jewelry Soldering Kit with Silver Solder Wire Kit-1750

  • Kit Includes: Mini Butane Torch, Sparex Pickle Compound.
  • Handy Flux, Magnesia Soldering Block, Copper Tongs with Curved Tip,.
  • Silver Solder Wire - Easy, Medium and Hard,.
  • Tweezers - Boley Style, Third Hand w/Tweezers, Tripod with Mesh Screen,.
  • Eco Solder Pick, Wire Cutter (Style and PVC color may vary), Utility Flux BrushDescriptionWe put this soldering kit together with all the tools and supplies you will need to start soldering, whether you are a beginner, taking a class, or are setting up your studio. You will be able to immediately solder sterling silver, fine silver, PMC3, nickle silver, copper, brass, and bronze. These soldering tools are all you need to perform small soldering tasks for jewelry making and repairs, tasks such as balling headpins, soldering chain ends, pin backs and bails, soldering jump rings closed and so much more. We recommend starting with 16-22 gauge sheet and wire if you're a beginner. Butane is not included and will need to be purchased separately. Kit includes: SFC Tools Micro Torch - Handheld Butane Torch, Silver Solder Wire 20 gauge - 1 foot each of easy, medium, and hard, Sparex Pickle Compound - 10 oz jar, Handy Flux - 8 oz. jar, Magnesia Soldering Block, Copper Tongs, Precision Tweezer - AA Fine Tip, Third Hand with Cr....
Check Stock

3 Pieces No Clean Soldering Flux Pen Rosin Solder Flux Pen for Electronics Tabbing Wiring Solder, Welding Maintenance of PCB Board, No

  • Quantity and size: package contains 3 pieces soldering flux pens, enough quantity for meeting your daily usage and replacement.
  • Each soldering flux pen measures approx. 5.6 inches in length.
  • Safe to use: these flux pens are made of quality material, no leak and safe to use.
  • Low solids content and quality of the activator system results in practically no residue left on the assembly after soldering.
  • No residue will interfere with electrical testing.
  • Useful and practical: no clean soldering flux pen is a novel tool for rework and repair welding.
  • It allows controlled application of flux, thereby removing dirt in the flux bottle.
  • Pen tip of 10 ml with practical designed felt tip.
  • The solid content is low and there is almost no residue.
  • Wide application: rosin solder flux pen is suitable for automotive, computer, work for rework, and through hole solder joints.
  • It is lightweight and would not occupy too much space, suitable pocket size to carry.
  • How to use: before the first time use, you should press the pen tip 1 - 2 times for releasing air, then use no clean solder flux pen to remove the oxidizing wax.
  • After that, you can use the alcohol to clean the pen.
Check Stock

Solder Wire and Rosin Paste Flux Kit - 60-40 Tin Lead Rosin Core Solder Wire (0.6mm, 100g) and Rosin Paste Flux for PCB Electrical Soldering and DIY from Plusivo

  • Solder Wire: Included in the kit is a high quality 100 grams 60-40 (Sn/Pb) Tin - Lead rosin core solder wire alloy with 0.6mm diameter and 1.6% flux content commonly used for wiring appliances, DIY projects, 3D printers and other electronic projects or electrical and electronics soldering and repairs.
  • Rosin Paste Flux: This high-quality rosin flux soldering paste facilitates the flow of solder, thus increasing the efficiency of the soldering process and is just right for your small DIY soldering projects..
  • BONUS Items: Aside from the solder wire and rosin paste, this kit also includes 2 mini screwdrivers and two 22 AWG Wire tinned copper PVC jacket, a great addition to a very simple and affordable kit for soldering..
  • Durable Carton Box: All items are neatly packed inside a durable carton box to keep them organized, secured, and easy to carry and transport anywhere..
  • Satisfaction Guarantee: The Solder Wire and Paste Kit is backed by the manufacturer’s 30-day money-back guarantee and lifetime customer support, ensuring the customers’ high level of satisfaction..
Check Stock

No Clean Soldering Flux Pen and Solder Remover Wick, 0.1 Inch Wide and 59 Inch Long, Solder Braid Wick Liquid Solder Flux Pen for Electronics Welding Repair Tabbing Wire Maintenance (6 Pieces)

  • Package includes: you will receive 3 pieces of no clean solder flux pens, and 3 pieces of soldering braided wick, in total of 6 pieces, sufficient quantity and a considerate combination to meet your needs for daily use and replacement.
  • Suitable size: the rosin flux pen measures about 14.3 cm/ 5.6 inches in length, and the solder braided wick is about 1.5 m/ 59 inches long and 2.5 mm/ 0.1 inches wide, which is convenient to hold in hand.
  • Please check the size carefully before purchasing.
  • Quality material: these no-clean soldering wicks are made of quality copper wire and adopt precise weaving technology, which can enhance tension on the surface to absorb excess solder.
  • The liquid solder pen is made of reliable materials, no leaking and safe for protecting the flux, preventing you from touching the organic solvents.
  • Practical tools: 10-ml solder flux pen with soft brush tip can release the liquid flow moderately, which can clean the components without harming the PCB board copper foil or IC pin.
  • The solder remover wick features good thermal conductivity and absorption, useful to reduce the risk of thermal injury to the circuit boards.
  • Wide applications: these flux pens and braided solder wicks can be applied for laboratory, computer, home repairs and ....
Check Stock

MG Chemicals 4895-227G 60/40 Rosin Core Leaded Solder, 0.032\ Diameter, 1/2 lbs Spool

  • Tin Lead Rosin Core Solder：rosin core solder wire is designed for electrical repairs, such as radios, TVs, VCRs, stereos, wires, motors, circuit board and other electronics devices，gauge wires, toys, stained glass, jewelry and more.
  • Solder Wire Composition：60% Tin and 40% lead. Melting point 190°C / 374°F, quick and easy，Rosin core with 2% flux, no extra flux is needed.
  • Good quality soldering wire: flows well and heats evenly, easy to use. Good solder ability both in electrical conductivity and thermal conductivity.
  • With the solder wire reel, soldering can be accomplished quickly..
  • Pack Content: 50g( 0.11lbs) 0.6mm X1 and 50g( 0.11lbs) 1.5mm X1, perfect as a starter kit for beginners.
  • Rosin Core Solder Wire:We have a professional team and provide high 60/40 rosin core solder wire..
Check Stock

5 Pieces No Clean Solder Flux Pen 5.6 Inch Length for Electronics Tabbing Wire Soldering Welding Repair

  • What can you get: the package includes 5 pieces of no clean solder flux pens, enough quantity providing you a wide choice for daily life use and replace.
  • Proper size: the soldering no clean flux pen measure approx. 14.3 cm/ 5.6 inches in length, please check the size carefully before purchasing.
  • Reliable and quality material: the liquid soldering pen is made of reliable materials and no leak and safe design for protecting the flux, keep you from touching the organic solvents.
  • Wide applications: these flux pens can be applied for laboratory, computer, telecommunications, home repairs, bringing a lot of convenience to your work.
  • Simple operation: you only need to press the pen tip 1-2 times to release the liquid, and after use, the flux pen can be cleaned with alcohol.
Check Stock

Jewelry Soldering Kit w/Butane Torch SFC Tools Kit-1700

  • Kit Includes: Soldering Made Simple Book, Mini Butane Torch (supplied empty),.
  • Sparex Pickle Compound, Silver Solder Wire - Easy, Medium and Hard,.
  • Handy Flux, Magnesia Soldering Block, Copper Tongs with Curved Tip,.
  • Tweezers - Boley Style, Third Hand w/Tweezers, Tripod with Mesh Screen,.
  • Eco Solder Pick, Wire Cutter (Style and PVC color may vary), Utility Flux Brush.
Check Stock

SONEAK 60/40 Tin Lead Solder With Rosin Core For Electrical Soldering 1.0mm 50g

  • ★ Tin Lead Solder Wire: High quality Rosin Core Solder Wire.
  • ★ Sn60-Pb40 Solder: Sn 60%- Pb 40%, Flux 2.0%.
  • ★ Lower Melting Point: 361F/183C, easy to be soldered, flows smoothly, soldering fast and strong shiny soldering point.
  • ★ Special Features: This SONEAK 1.0mm solder wire offers lower temperature melting, pretty good flow,clean, less smoke, reliable and nice soldering joint.
  • ★ Applications: Very good soldering capability for electrical soldering, esp DIY project, Home improvement, Maintenance of sterro, toys, TV circuit boards etc. repairing.(Warning: This product can expose you to lead which is know to the State of Califormia to cause brith defects or other reproductive harm. For more information go to the offical Proposition 65 Warnings website).
Check Stock

Whizzotech Solder Wire 60/40 with Flux Rosin Core for Electrical Soldering 4oz/100g/0.22lb Diameter 0.032 Inch/0.8mm

  • Tin Lead solder wire alloy content, Tin 60%-Pb 40% (Sn60Pb40), Flux 1.7%.
  • High quality rosin core solder wire. The Soldering Wire has antioxidant for a long time and good weldability, melts quick and clean, flows smooth.
  • Good soldering kit for electrical soldering.
  • Low Melting Point, 370℉. Weight, 4oz (100g). Diameter, 0.032 In (0.8 mm).
Check Stock

5 In1 Lead Free Solder and Solder Flux Kit | 50g Lead-Free Solder Paste | 0.6mm Solder Wire with Rosin Core | 5 Pcs Replacement Soldering Iron Tips | Solder Supplies for Electronics Metalwork Weld

  • [Good quality soldering wire] Lead free solder wire with rosin core: 0.6 mm/ 0.023 inches.Materials: Sn99.3%, Cu0.7%. Weight: 50gram/0.11lbs/1.76ounces.Lower Melting Point, good welding performance..
  • [Rosin Solder Flux] Lead free flux, PH7±0.3, Weight: 50gram/0.11lbs/1.76ounces. Solder flux facilitates the flow of solder, solder paste can increases efficiency of the soldering process，allows solder to form strong..
  • [5 Solder Tips] Copper tips are plated with iron, nickel .5 Pcs replacement soldering iron tips for different shapes and sizes.This speical customized tip set can achieve almost any soldering application you need..
  • [Protect users and the environment] We use lead-free formula to ensure that your welding work will not harm your health due to lead smoke.At the same time, lead-free products will not damage our environment due to product residue..
  • [Surprise price]Buying this set will save you more money than buying any of the products in the kit separately.If you are not 100% satisfied just contact us, we will provide you with a full refund or exchange immediately! No any risk, add to your cart now..
Check Stock

VIRALLOY No Clean Flux Solder Wick Braid Length 10ft Width 2.5mm Solder Copper Static Dissipative Bobbin Desoldering Wick Solder Remover Wick Desolder Electronic Components - Pack of 1

  • Are you looking for a flux wick and an effective and efficient way to remove solder from your circuit boards? Look no further than the VIRALLOY No Clean Solder Flux Desoldering Braid!.
  • Made from pure copper wires woven together with a no-clean flux formula, this solder braid wick is designed to absorb and remove solder from your circuit boards quickly and easily.
  • The ergonomic design of the solder flux remover desoldering wick ensures that it will leave little to no residue after use, and the residues that are left behind are non-conductive and halide-free.
  • Plus, the flux for soldering copper soldering wick is easy to use - simply place it over the area where you want to remove the solder and heat it up.
  • The solder tape will absorb the solder, leaving your circuit board clean and free of unwanted solder. So why wait? Get the VIRALLOY No Clean Desolder Wick today and make desoldering a breeze!.
Check Stock

Solder Wire and Rosin Paste Flux Kit - 60-40 Tin Lead Rosin Core Solder Wire 0.6mm 50g and Rosin Paste Flux for PCB Electrical Soldering and DIY from Plusivo

  • Solder Wire: Included in the kit is a high quality 50 grams 60-40 (Sn/Pb) Tin - Lead rosin core solder wire alloy with 0.6mm diameter and 1.6% flux....
  • Rosin Paste Flux: This high-quality rosin flux soldering paste facilitates the flow of solder, thus increasing the efficiency of the soldering process....
  • BONUS Items: Aside from the solder wire and rosin paste, this kit also includes 2 mini screwdrivers and two 22 AWG Wire tinned copper PVC jacket, a....
  • Durable Carton Box: All items are neatly packed inside a durable carton box to keep them organized, secured, and easy to carry and transport anywhere..
  • Satisfaction Guarantee: The Solder Wire and Paste Kit is backed by the manufacturer’s 30-day money-back guarantee and lifetime customer support,....
Check Stock