Categories

Best Solderless Breadboard

MCIGICM 16Pcs Breadboard 400 Tie Point Solderless Prototype PCB Board Protoboard for Arduino DIY

  • Featuers: 16 pcs prototype breadboard with 400 tie point.
  • Solderless breadboard in breadboard kit is for diy arduino, and you can use with breadboard jumpers wires and breadboard power supply for toys and....
  • Advantages: easy to fixed breadboard jumper wires, easy to use breadboard holder, suitable to pi breadboard Kit..
  • The breadboard is made of ABS plastic, each row and columns has corresponding letters and numbers, reduce the mistake handling ..
Check Stock

MCIGICM 10pcs Breadboard 830 Point Solderless Prototype PCB Board Kit Protoboard MB-102 for Arduino DIY Electronics kit

  • Featuers: 10pcs large breadboard, mb-102 , 830 point prototype breadboard..
  • Solderless breadboard in breadboard kit is for diy arduino ,and you can use with breadboard jumpers wires and breadboard power supply for toys and....
  • Advantages: easy to fixed breadboard jumper wires, easy to use breadboard holder, suitable to pi breadboard kit..
  • The breadboard is made of ABS plastic, each row and columns has corresponding letters and numbers, reduce the mistake handling ..
  • We sincerely hope you have a good experience with our professional service..
Check Stock

BOJACK 3 Values 130 Pcs Solderless Breadboard 4 Pcs 830 Tie Points & 400 Tie Points & 126 Pcs Flexible Breadboard Jumper Wires

  • BOJACK high quality Solderless Breadboard Assortment Kit.
  • Breadboard is a solderless device for temporary prototype with electronics and test circuit designs. Most electronic components in electronic circuits can be interconnected by inserting their leads or terminals into the holes and then making connections through wires where appropriate..
  • The breadboard has strips of metal underneath the board and connect the holes on the top of the board. Note that the top and bottom rows of holes are connected horizontally and split in the middle while the remaining holes are connected vertically..
  • The Breadboards Can be Spliced According to the Unit, the Structure is Clear in Color..
  • Material: ABS Plastic Panel, Tin Plated Phosphor Bronze Contact Sheet..
Check Stock

MCIGICM 48 Pcs Mini Breadboard 170 Point Solderless Prototype PCB Board Kit for Arduino Proto Shield Distribution Connecting Blocks, 8 pcs for Each

  • Featuers: 48pcs mini breadboard, 8 pcs for each color, green/ white/ black/ red/ blue/ yellow, 170 point prototype breadboard..
  • Solderless breadboard in breadboard kit is for diy arduino ,and you can use with breadboard jumpers wires and breadboard power supply for toys and games..
  • Advantages: easy to fixed breadboard jumper wires, easy to use breadboard holder, suitable to pi breadboard kit..
  • The breadboard is made of ABS plastic, each row and columns has corresponding letters and numbers, reduce the mistake handling ..
  • Package includes: 48 X 170 tie-pointsbreadboard..
Check Stock

Gikfun Mini Solderless Breadboard 400 Tie-points + 2xPCB Solder-able Breadboard + 2.54mm 10Pin Jumper Wires Male to Male DIY Kit for Arduino EK8473

  • This board is especially useful for preserving a prototype or experiment you just created on a solderless breadboard by soldering all the pieces in place..
  • 1 x Mini Solderless Breadboard 400 points, Size:8.3cm x 5.5cm..
  • 2 x PCB Solder-able Breadboard, Gold plated finish prevents oxidation, High quality Gold finish for easy soldering. All holes are through-plated for strength..
  • 10Pin 2.54mm Male to Male Jumper Wires Male to Male, 20CM..
Check Stock

eBoot 3 Pieces 400-Point Solderless Circuit Breadboard with 65 Pieces M/M Flexible Breadboard Jumper Wires

  • Breadboard with jumper wire set: 3 pieces 400-point solderless circuit breadboard.
  • 65 Pieces male-male flexible breadboard jumper wires.
  • Easy to use: the breadboard is made of ABS plastic, each row and columns has corresponding letters and numbers, reduce the mistake handling.
  • Breadboard: plug and play, 400 tie points, peelable adhesive tape backing.
  • You had better clean the place you want to stick firstly, to make a good....
  • Breadboard jumper wires: good conductivity, it's hard to drop the head of the wire, can be applied repeatedly.
  • Compatible with electronic and electrical experiments.
  • The jumper wires are easy to insert into the breadboard.
Check Stock

Gikfun Large Solder-able Breadboard Gold Plated Finish Proto Board PCB DIY Kit for Arduino GK1008

  • It is the Large Gikfun Solder-able Breadboard.
  • This board is especially useful for preserving a prototype or experiment you just created on a solderless breadboard by soldering all the pieces in place.
  • Gold plated finish prevents oxidation, High quality Gold finish for easy soldering.
  • All holes are through-plated for strength.
  • Pack of 3PCS, Breadboard PCB for any type Raspberry Pi GPIO.
Check Stock

REXQualis Accessories kit Compatible with Raspberry Pi 4 3B+ 3B 2B B+ A+ Zero w/Solderless Breadboard + GPIO T Type Expansion Board + Jumper Wires + Rainbow Ribbon Cable + Resistors

  • This kit is compatible with the Raspberry Pi 4 3B+ 3B 2B B+ A+ Zero..
  • The GPIO expansion board is in a fancy T-shape, compatible with all 40-Pin Raspberry Pi Models..
  • High Quality Solderless Breadboard: 830 tie-points and 400 tie-points Solderless Breadboard, 2 independent power rail sets in total Adhesive backing Solid construction..
  • Jumper Cable Wires Kits: 65 pcs several lengths Male to Male jumper wires, 40pin Rainbow Ribbon Cable and 20pin Male to Female jumper wires, Makes wiring a cinch,meet all your needs..
  • Perfect Packaging: Sturdy plastic case can more perfectly protect product not damaged during transportation..
Check Stock

(4 Pcs) MCIGICM 400 Points Solderless Breadboard

  • 400 Points Solderless Breadboard with 2 Positive & Negative Power Lines on both ends..
  • White ABS Plastic Body with Black Printed Legend. Color Legend on Distribution Strips..
  • With Self-Adhesive Tape on the back allows to stick on the prototype shield..
  • Fit for 21-26 AWG (0.4-0.7MM) wire. Comparing with breadboards of high AWG wire, MCIGICM breadboards is of higher physical strength and lower resistance..
  • Good for Breadboard Jumper Wires kit Project and other Electrical DIY kits..
Check Stock

Aoicrie Jumper Wire Kit, 840 Pieces Preformed Breadboard Jumper Wire Kit,14 Lengths Assorted Jumper Wire for Breadboard Prototyping Solder Circuits

  • This kit is the most complete Breadboard Jumper Wires set which contains high quality assorted U-Shape Jumper Wires, assorted solderless flexible jumper cables, tweezer, with which you can do all kinds of circuit experiments..
  • 2 mm, 5 mm, 7 mm, 10 mm, 12 mm, 15 mm, 17 mm, 20 mm, 22 mm, 25 mm, 50 mm, 75 mm, 100 mm, 125 mm. Note: The kit may also be equipped with a 26AWG jumper..
  • Easy to use : each jumper has stripped ends and preformed right-angled leads for easy insertion into your breadboard ,all the colored jumper wire are pre-stripped and preformed right-angled, easy to insert it into breadboard..
  • Wide Application : designed to work well with any breadboards or anywhere jumper wires are needed, perfect for breadboard projects these breadboards wires are ideal for use with any breadboard, prototyping, prototype circuits, LED strip, test circuits and etc..
  • Package includes : contains 840 pieces U shape preformed breadboard jumper wire kit, 14 lengths, 60 pieces per size,Note: the breadboard wire is a little soft that convenient for changing its shape to do connect test.
  • if you find that it can't be inserted, please check whether the cable in the pin hole of a breadboard is in good condition or not.come with a f....
Check Stock

Breadboard Solderless Prototype PCB Board ALLUS BB-009 (3pcs) 400 Pin with 4 Power Rails and Double Sided Tape for Raspberry Pi and Arduino

  • Solderless breadboard is convenient for the prototypes and circuit design experiment and other DIY projects. Perfect for Arduino, Raspberry Pi, and other programming boards.
  • Easy to use: the breadboard is made of ABS plastic, each row and columns has corresponding letters and numbers, reduce the mistake handling.
  • Self-adhesive back tape makes it easy to stick on a platform, like the Arduino prototype shield.
  • With tight plug-in contacts, the components will sit well after assembly and nothing will wobble..
  • The jumper wires are easy to insert into the breadboard..
Check Stock

Testeronics 7 in 1 Breadboard Power Module Kit Compatible for Arduino/Raspberry Pi| 2PCS 3.3V/5V Power Supply Modules | 9V/1A Power Adaptor | 2PCS Solderless Breadboard 400 Points|65 PCS Jumper Wires

  • [Breadboard Power Module] Input voltage: 6.5-9V (DC Jack) or USB power supply.
  • [9V / 1A Power Adaptor] Output 9V / 1A DC, Input: 100~240V AC. US Plug 5.5mm x 2.5mm.
  • Compatible for Arduino UNO R3 Mega 2560 1280 ..
  • [400 Breadboard] 400 Points Solderless Breadboard, ABS Plastic Body, Fit for 21-26 AWG (0.4-0.7MM) wire. Compatible for Arduino Nano, ESP32, Raspberry Pi Pico..
  • [DC Power Splitter Cable] 1 Female to 2 Male 5.5mm x 2.1mm DC Power Adapter Splitter Cable.
  • [65 Jumper Wires] 65 PCS 24AWG Breadboard Solid Multi colors pure Copper Jumper Wires Kit.
Check Stock

UCTRONICS GPIO Breakout Kit for Raspberry Pi Pico- Assembled Pi T- Type Breakout + 830 Tie Points Solderless Breadboard + 40 Pin Male - Female - Male Rainbow Ribbon Cable + 65pcs Jump Wires

  • Application: Suitable for Project with Raspberry Pi 3 2 Model B B+ A+ A,zero W and Raspberry pi zero.
  • Convenient: Breadboard and T-type expansion board make the experiment more convenient.
  • Compatibility: You can connect all version raspberry of the board to various sensors and electronic components with the GPIO extension board.
  • Package: A T-type expansion board, 830 Tie Points Solderless breadboard, 40 pin male to female to male Rainbow Cable and 65pcs breadboard jump wires.
  • Detailed instructions, worry-free warranty, strong technical support & great customer service.
Check Stock