Categories

Best Solid Carbide Boring Bars

Amana Tool 217013 Solid Carbide Dowel Drill Bit Through Hole Boring Drill Bits 3mm D x 70mm Long x 10x25mm SHK Right Hand

  • DOWEL DRILL BIT – The Through Hole Solid Carbide Dowel Drill Bit is designed to drill and bore clean holes through hard and soft woods..
  • DESIGNED FOR – This 3 mm boring bit for doweling allows you to create dowel joints with your handheld drill..
  • CREATE CLEAN HOLES – Use the dowel bit to create clean, straight, and accurately sized holes in wood..
  • SOLID CARBIDE-GRADE – Special solid carbide through hole boring bit made for long-lasting cutting edge performance and tool life..
  • INDUSTRIAL-QUALITY TOOLS – Amana Tool is a worldwide leading tool provider with USA-based corporate headquarters and warehouse, specializing in industrial-quality cutting tools..
Check Stock

OSCARBIDE 1/2 x 7 Indexable Boring Bar with 10 Pieces Carbide Insert CCMT09T304 CCMT32.5 Right-Hand Sclcr Boring Bar

  • Sclcr Boring Bar 1/2" Shank Diameter,Overall Length 7”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient,good wear resistance.
  • Used for Turning internal hole,reaming,copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Packing:1 pc 1/2'' x 7'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

ASZLBYM 2PCS 5/8\ MGIVR2016-2 MGIVL2016-2 Lathe Boring Bar Grooving Cut-Off Tool Holder with 2PCS MGMN200-G NC3020 Insert

  • Sclcr Boring Bar 5/8" Shank Diameter, Overall Length 8”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
  • Packing:1 pc 5/8'' x 8'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

OSCARBIDE 5/8''by 8''Indexable Boring Bar Right-Hand Sclcr Boring Bar with CCMT09T304(CCMT32.5),1 Piece

  • Sclcr Boring Bar 5/8" Shank Diameter, Overall Length 8”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Indexable Boring Bar Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Replacement insert for this kit ,please search the Asin of this item:B07W7PVWR1 to buy it.
Check Stock

Wisamic 11 Pcs 5/16 inch Carbide Tipped Cutter Set for Metal Lathe Turning, Boring, and Chamfering

  • 2 pieces: 4-7/8" long Cranked Boring Bars.
  • Made of drop forged tool steel with tungsten carbide tips..
  • Can be resharpened & reshaped for many times..
  • Suitable for machining mild steel brass copper and plastics..
  • For metal lathe, mini lathe, milling other general machining operations such as turning & boring..
Check Stock

1/2\ Lathe Threading Tool External/Internal Threading Holder SER 1212H11+ SNL 0008K11 Threading Holder with 11ER AG60 11IR AG60 Threading Inserts (SER1212H11+SNL0008K11+11ER AG60)

  • ♥Package includes ：1PC SNR0008K11 + 1PC SNR0010K11 + 1PC SNR0012M11 turning tools + 3PCS 11IR A60 turning inserts + 3PCS T8 wrench.
  • ♥3pcs Thredaing boring bars : The material of the boring bar is 40Cr steel, Widely Use, Tightly impacted bolt, simple structure, often used for small hole machining..
  • ♥3pcs 11IR A60 boring inserts : 60°general thread insert, processing pitch range: 0.5mm - 1.5mm. Inserts are made of carbide and the coating material is TiN ,it Can be used for processing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..
  • ♥Package: The carbide inserts and turning tools holder are packed in plastic containers, safe and easy to store ..
  • ♥ If you need more 11IR A60, please search ASIN：B09496NZ3R.
Check Stock

VeYocilk Lathe Threading Carbide Inserts:10 Pcs 11IR A60 1/4 Carbide Inserts for Internal Threading Holders CNC Cutting CNC Turning Tool

  • High Efficiency: This turning tool holders kit for semi-finishing and finishing operations, can reduce the tool grinding cost and improve the cutting efficiency..
  • High Performance: Made of carbide and the coating material is TIN, it can be used for processing steel, the inserts has high hardness, low friction coefficient, good wear resistance and strong impact resistance..
  • Threading Boring Bars: The material of the boring bar is 40Cr steel, widely use, tightly impacted bolt, simple structure, often used for small hole machining..
  • Package Includes: 1PC SNR0008K11 + 1PC SNR0010K11 + 1PC SNR0012M11 turning tools + 3PCS 11IR A60 turning inserts + 3PCS T8 wrench..
  • Best Service: The carbide inserts and turning tools holder are packed in plastic containers, which is safe and easy to store. Any more question about this item, please feel free to email us..
Check Stock

Accusize Industrial Tools 8 Pc 3/4 Round Shank Indexable Boring Bar Set with Tcmt Carbide Inserts 90 Degree 2627-9108

  • 3/4", .75in Round Shank, 90 Degree, Indexable Boring Bar Set, allowing the operator to set positive or negative rake.
  • Chip breaker eliminates long stringer chips, A new cutting edge may be presented by simply, indexing the insert.
  • It is not necessary to remove tool from chuck or tool post.
  • Positive Rake 90Degree Lead, Uses 0.050" key, C6 grade: carbide for steel and alloy steel.
  • 1/4" I.C. carbide inserts fit all bars, Radius = 0.015", Key = T8, Shank: 3/4", Piece per set: 8.
Check Stock

OSCARBIDE 1/2'' x 7''Indexable Boring Bar,Right-Hand Sclcr Boring Bar with Carbide Insert CCMT09T304(CCMT32.5),1 Piece

  • Sclcr Boring Bar 1/2" Shank Diameter, Overall Length 7”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
  • Replacement insert for this kit ,please search the Asin of this item:B07W7PVWR1 to buy it.
Check Stock

CHAMDRILLHEAD DRILLING HOLDER .748 TO .783 RANGE, .748 SHANK

  • 13PCS 2" boring head set w/ R8 shank kit includes 9pcs 1/2" boring bars, 1pc R8 handle and 3pcs hex wrenches, all packaged in a solid box for easy storage and carry..
  • 2 Inch boring head with R8 shank, these tools are made of high quality steel with great match of hardness and toughness. Hard and durable for long lasting and trouble free use..
  • Center Distance bt 2 bottom hole: 0.60"..
  • A micrometer lead screw provides 0.0001" direct reading accuracy and ease of adjusting. Perfect for milling machines..
  • Used for processing inner hole surfaces, boring, boring outer circle, boring end face, boring ladder hole, boring hole end face, cutting hole and outer ring groove, etc..
Check Stock

OSCARBIDE Indexable Boring Bar 3/4 x 10 Overall Length,Right-Hand Sclcr Boring Bar S12S-SCLCR3 with CCMT09T304 CCMT32.5 ,1 Piece

  • Sclcr Boring Bar 3/4" Shank Diameter, Overall Length 10”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Replacement insert for this kit ,please search the Asin of this item:B07W7PVWR1 to buy it.
Check Stock

ASZLBYM 3/4 Lathe Internal Boring Bar Turning Tool Holder S20R-MWLNR08 with Indexable Carbide Turning Insert WNMG432

  • ♥package : 1pc S20R-MWLNR08 boring bar+ 10pcs WNMG432 carbide insert + 1pc wrench..
  • ♥ S20R-MWLNR08 turning boring bar : the cutting direction：right hand , the turning tool bar is made of high-quality alloy steel with Nickel Cotated,which can effectively improve the wear resistance, corrosion resistance and stability of the turning tool bar, for long time use..
  • ♥WNMG432 carbide insert : inserts are made of carbide and the coating material is TiN ,it can be used for finishing or semi finishing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..
  • ♥The carbide inserts and turning boring bar are packed in plastic containers, safe and easy to store ..
Check Stock

ASZLBYM SNR0013M16 CNC Lathe Internal Threading Boring Bar Turning Tool Holder With 10pcs 16IR AG60 Carbide turning insert

  • ♥Package includes ：1PC SNR0013M16 boring bar + 11PCS 16IR AG60 carbide thrading turning insert + 1PC T15 wrench.
  • ♥SNR0013M16 : overall length : 150mm=5.9inch , shank diameter : 13mm=0.51inch, cutting direction : internal thread right cutting.
  • ♥ Thredaing boring bar : The material of the boring bar is 40Cr steel, Widely Use, Tightly impacted bolt, simple structure, often used for small hole machining..
  • ♥16IR AG60 carbide inserts : 16IR AG60 inserts are made of carbide and the coating material is TiN , processing pitch range : 0.5~3.0mm.
  • ♥16IR AG60 carbide inserts Can be used for processing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..
Check Stock