Categories

Best Solvent free Epoxy

West System 105A Epoxy Resin (32 fl oz) Bundle with 205A Fast Epoxy Hardener (7 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • ...is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • PRE-WARM THE RESIN AND HARDENER: Cold temperatures increase an epoxys viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity, so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment.
  • FIVE-PART RESIN TO ONE-PART HARDENER RATIO: Mix 205 Fast Epoxy Hardener with 105 Epoxy Resin in a five-part resin to one-part hardener ratio. The resulting cured epoxy is a rigid, high-strength, moisture-resistant solid. The c....
Check Stock

West System 105B Epoxy Resin (126.6 fl oz) Bundle with 205B Fast Epoxy Hardener (27.5 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • ...is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • PRE-WARM THE RESIN AND HARDENER: Cold temperatures increase an epoxys viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity, so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment.
  • FIVE-PART RESIN TO ONE-PART HARDENER RATIO: Mix 205 Fast Epoxy Hardener with 105 Epoxy Resin in a five-part resin to one-part hardener ratio. The resulting cured epoxy is a rigid, high-strength, moisture-resistant solid. The c....
Check Stock

West System 105A Epoxy Resin (32 fl oz) Bundle with 207SA Special Clear Epoxy Hardener (10.6 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • ...is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • STRONG PHYSICAL PROPERTIES: The 105/207 Epoxy Mixture has strong physical properties, so it can be used as a structural adhesive for gluing and laminating. It has excellent compatibility with paints and varnishes. An ultraviolet inhibitor in 207 Special Clear Hardener helps provide a beautiful, long-lasting finish when used with quality UV filtering varnish. The 105/207 Epoxy Mixture cures clear and colorless.
  • APPLICATIONS: Three coats or more can be applied in one day without additional surface preparation. Fewer coats are required to fill fiberglass weave and in most cases, the final coating can be sanded the following day. Bu....
Check Stock

West System 105B Epoxy Resin (126.6 fl oz) Bundle with 207SB Special Clear Epoxy Hardener (42.2 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • ...is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • STRONG PHYSICAL PROPERTIES: The 105/207 Epoxy Mixture has strong physical properties, so it can be used as a structural adhesive for gluing and laminating. It has excellent compatibility with paints and varnishes. An ultraviolet inhibitor in 207 Special Clear Hardener helps provide a beautiful, long-lasting finish when used with quality UV filtering varnish. The 105/207 Epoxy Mixture cures clear and colorless.
  • APPLICATIONS: Three coats or more can be applied in one day without additional surface preparation. Fewer coats are required to fill fiberglass weave and in most cases, the final coating can be sanded the following day. Bu....
Check Stock

J-B Weld 8265S Original Steel Reinforced Epoxy Twin Pack - 2 oz (Pack of 2)

  • SLOW-CURE FOR COMPLICATED JOBS: A long curing time makes this adhesive perfect for difficult tasks that may require adjustments.
  • effectively reposition pieces for up to 80 minutes.
  • FIX OFFICE FURNITURE:  Such as broken handles and splintered wood.
  • also use on garden statues, figurines and the like indoors or out..
  • REPAIR TOYS: Repair, don’t throw out small delicate plastic glass or ceramic item, repair toys, use as golf epoxy and more.
  • PROFESSIONAL GRADE STRENGTH: Extra-strong, waterproof adhesive.
  • MULTI-USE APPLICATION: Indoor or outdoor epoxy glue for metal, wood, ceramics, glass, dry concrete, chipboard, leather, cardboard, fabric, rubber and most plastics (except polyethylene, polypropylene, and PTFE).
  • STRONG AND DURABLE: Provides a strong bond that sets clear.
  • can be sanded and painted after bonding or repair.
  • water, oil, chemical and impact resistant.
  • high temperature resistance (-30 to 65 degree Celsius).
  • WITHSTANDS ROUGH HANDLING: Two-part epoxy glue instant mix.
  • for best results apply epoxy adhesive to clean and slightly rough surfaces.
Check Stock

Craft Resin 1 Gallon Epoxy Resin Kit - Crystal Clear Epoxy Resin Kit & Hardener for DIY Art, Mold Casting, Jewelry Making, Coasters, Table Top, Countertop Coating - Food Safe, Heat & UV Resistant

  • ...your resin projects? Our advanced formula is an innovation on the epoxy resin market. Release air bubbles automatically when the resin is warm, recommended depth 1/4 inch..
  • ✅ CERTIFIED, FOOD SAFE - Craft Resin epoxy made with a minimal odor, non-toxic, free of VOCs & solvent materials - food grade epoxy resin perfectly formulated for home and professional use. Harmless to you and the environment, when used as directed..
  • FAST CURING, HEAT RESISTANT - It takes only 24 hours for our crystal epoxy resin to cure. After this time it becomes rock hard, scratch resistant, advanced additive resistant to heat up to 203℉ (95℃). You’re going to have a crystal clear, glassy smooth finish which will last for years..
  • ‍ EASY TO USE, 1:1 RATIO - Our two part epoxy resin kit is simple to use, even for beginners. Kits include resin (68OZ), hardener (68OZ), reusable mixing stick, gloves, manual. Upgrade your resin game and elevate your art to the next level with Craft Resin supplies..
Check Stock

Red Dye - Solvent Based Red Liquid Dye -Bright Crimson Red

  • Liquid Dye - (1) oz of Keda Liquid Dye Makes (2) Quarts Dye Stain For Wood or Leather.
  • Powerful & Vibrant Dye - Keda Liquid Dyes Are Of Superior Quality That People Have Come To Expect From Our Product.
  • All 5 Dye Colors Are Completely Intermixable To Create Numerous Dye Stain Colors.
  • Lacquer Tint - Keda Solvent Dyes Mix With Lacquers, Shellac, Polycrylic, Epoxy and Many Solvent and Water Based Top Coat Sealers.
  • Liquid Dyes Mix Easily With Many Solvent Reagents Like: Lacquer Thinner, Alcohols, Acetone, Water & Others.
Check Stock

System Three SculpWood Paste Epoxy Wood Filler, 0.5 Gallon Kit

  • Premium Epoxy: SculpWood Paste is a smooth, creamy 2-part epoxy finishing paste compound that's compatible with most water/solvent-based primers and paints.
  • Easy To Apply: Spread our Sculpwood epoxy paste evenly over the surface, slightly overfilling voids and cracks to ensure sufficient material is available for sanding.
  • Versatile Application: Excellent companion for SculpWood Putty when filling cracks and repairing small defects.
  • Wood filler can be used as a standalone product for exterior architectural repairs such as filling cracks, dings, or nail and screw holes.
  • Fast Curing: At 70°F, SculpWood Paste reaches a sandable state in 6-8 hours.
  • Once the wood filler reaches this state, it can be coated with primer and paint.
  • Tips and Tricks: Cold temperatures extend the cure time of this waterproof epoxy wood filler, while warmer temperatures reduce the cure time.
Check Stock

J-B Weld Tabletop Epoxy Resin, 1 Gallon Kit, Cures Clear, Fast Cure Time, Minimal Bubbling, Scratch & Water Resistant

  • J-B WELD CLEARTOP: is a 1:1 mix ratio, crystal clear pour-on epoxy that provides a protective surface for all your projects. J-B Weld ClearTop is a self-leveling, high viscosity and solvent-free formula allowing for a safe, smooth and even finish on your project. J-B Weld ClearTop resist scratching, contact heat (up to 150oF) and impact! ClearTop can be mixed with dyes to add coloring to the Epoxy and be sanded after fully cured. The half gallon bottles have graduated marking on them to help make sure you measure even amount of Part A & B..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

TotalBoat Epoxy Primer Thinner 200 Marine Solvent Quart

  • Marine solvent specially formulated for thinning or reducing TotalBoat TotalProtect, TotalBoat Aluminum Boat Barrier Coat, and TotalBoat 2-Part Epoxy....
  • Perfect for brush, roller, or spray applications.
  • Ideal surface prep solvent wipe for rubberized inflatable materials prior to applying TotalBoat Inflatable Boat Paint.
  • Makes it easy to remove paint from tools and equipment after painting is done.
  • Available in Quart size. 100% made in the USA. Use only with the TotalBoat products specified.
Check Stock

MCK46941200 - Medicine Cup Medi-Pak Clear Polypropylene

  • Box of 12 Pouring Masters 64 Ounce (2000 ml, 72 oz. total capacity) Premium Clear Graduated Plastic Mixing Cups. Excellent for use with Pouring Masters epoxy and acrylic paints. Cup lids are not included, but are available separately..
  • These specially designed cups have accurate graduated measuring scales printed on them in ounces (oz) and milliliters (ml) with 1 oz. and 25 ml graduated intervals..
  • The cups also have multiple sets of accurate mixing ratios printed on them including two-component 1:1 and three-component ratios 2:1:1, 3:1:1, and 4:1:1..
  • Time saving multi-purpose mixing cups that are excellent for mixing, measuring, and pouring paint, resin, epoxy, stains, art and craft materials, cooking and ingredients, plus much more. Sturdy cups made with durable (PET) plastic that's solvent resistant to most paint chemicals..
  • Easy to use premium cups that make mixing, measuring, and pouring mess-free! Used by professionals and kids to mix, pour and create art, delicious food, and more!.
Check Stock

EnduraSeal 100% Acrylic'Wet Look' Semi Gloss Concrete Sealer Solvent Base - 5 Gallon

  • 100% pure acrylic, high performance lower odor solvent sealer.
  • Produces a semi gloss "Wet Look" to just about any type of subtrate.
  • Highly durable for a fraction of the cost of Urethane & Epoxy sealers..
  • Non-yellowing formula (Doesn't yellow the surface in time).
  • Lower odor than most solvent based sealers on the market.
Check Stock

Permatex 09102-6PK Rearview Mirror Adhesive Kit Pack of 6

  • Fast-setting, clear epoxy in an easy-to-use 2-part dispensing syringe.
  • This water and solvent resistant epoxy sets in 5 minutes with no clamping needed.
  • Better choice than super glues for bonding parts with larger gaps.
  • Temperature Range: -60°F to 180°F (-51°C to 82°C).
  • Suggested Applications: Complex, multi-piece assemblies. Bonds rigid materials including ceramic, chrome, fabric, fiberglass, glass, hard plastic,....
Check Stock