Categories

Best South Bridge Chip

ASRock Micro ATX DDR3 1066 Motherboards 970M PRO3

  • Chipset: North Bridge AMD 970 & South Bridge AMD SB950.
  • Memory: 4x DDR3-2400+(OC)/ 2100(OC)/ 1866(OC)/ 1800(OC)/ 1600(OC)/ 1333/ 1066 DIMM Slots, Dual Channel, Non-ECC, Unbuffered, Max Capacity of 64GB.
  • Slots: 2x PCI-Express 2.0 x16 Slots (one run x4), 1x PCI-Express 2.0 x1 Slots, 1x PCI Slot.
  • Storage: 6x SATA3 Ports, Support RAID 0, 1, 5, 10.
Check Stock

Large Current 50A H-Bridge High-Power Single-Channel Motor Driver Module Semiconductor Refrigeration

  • 【H-bridge Driver Module】The drive uses a full H-bridge driver module full-bridge MOSFET driver chip and composed with very low internal resistance and high current. MOSFET H-bridge driver circuit, with strong drive and braking effect, signal isolation chip isolates motor drive effectively..
  • 【Effective Protection】With the microcontroller PWM signal isolation, effectively protect microcontroller..
  • 【Input Maximum】To achieve the motor forward and reverse rotation, two PWM input maximum 200kHz frequency..
  • 【Fully Compatible】Power indicator is schematically clear. The power supply voltage 5V to 15V. 3.3V to 12V, PWM level is fully compatible. High current 50A..
  • 【Warm Tips】Ffor your safety and protection of use, our product is tested to ensure trouble-free installation and performance, please rest assured to buy..
Check Stock

Mainboard LGA 1155 DDR3 Computer Motherboard Computer Motherboard, for for B75

  • CPU AM3+ Socket: 1.Support for AMD AM3+ processor 2.Support for AMD AM3 Phenom II processor / AMD Athlon II processor Hyper Transport Bus 1.4400 MT/s Chipset 1.North Bridge: AMD 760G 2.South Bridge: AMD SB710 Memory 1.4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory 2.Dual channel memory architecture 3.Support for 1333+ (O.C....
Check Stock

Gigabyte AM3+ AMD DDR3 1333 760G HDMI USB 3.0 Micro ATX Motherboard GA-78LMT-USB3

  • Chipset: North Bridge AMD 760G & South Bridge SB710.
  • Memory: 4x 240pin DDR3-1333+(O.C.)/1066 DIMM Slots, Dual Channel, Max Capacity of 32GB.
  • Slots: 1x PCI-Express 2.0 x16 Slot, 1x PCI-Express 2.0 x1 Slot, 1x PCI Slot.
Check Stock

Gigabyte AM3+ AMD 970 SATA 6Gbps USB 3.0 ATX AM3+ Socket DDR3 1600 Motherboards GA-970A-DS3P

  • Chipset: North Bridge AMD 970 & South Bridge AMD SB950.
  • Memory: 4x DDR3-2000(OC)/1866/1600/1333/1066 DIMM Slots, Dual Channel, Max Capacity of 32GB.
  • Slots: 2x PCI-Express 2.0 x16 Slots (one runs at x4), 3x PCI-Express 2.0 x1 Slots, 2x PCI Slots.
  • AMD AM3 Phenom II processor/ AMD Athlon II processor.
Check Stock

ASUS Micro ATX DDR3 1066 AMD - AM3+ Motherboards M5A78L-M LE/USB3

  • Chipset: North Bridge AMD 760G (780L) & South Bridge AMD SB710.
  • Memory: 2x DDR3-1866/ 1600/ 1333/ 1066 DIMM Slots, Dual Channel, ECC/Non-ECC, Unbuffered, Max Capacity of 16GB.
  • Slots: 1x PCI-Express 2.0 x16 Slot, 1x PCI-Express 2.0 x1 Slot, 1x PCI Slot.
  • Multi-Graphics: Supports Hybrid CrossFireX Technology, Supports DirectX 10.
  • SATA: 4x SATA2 Ports, Support RAID 0, 1, 10, JBOD.
  • Audio: Realtek ALC887 8-Channel High Definition Audio CODEC.
  • Form Factor: MicroATX, 9.6 x 7.8 inch / 24.4 x 19.8 cm.
Check Stock

Asustek Computer M5a78l-m Plus Usb3 Am3+ 760g Matx vga+SND+gln+u3

  • Chipset: North Bridge AMD 760G (780L) & South Bridge AMD SB710.
  • Memory: 2x DDR3-1866/ 1600/ 1333/ 1066 DIMM Slots, Dual Channel, ECC/Non-ECC, Unbuffered, Max Capacity of 16GB.
  • Slots: 1x PCI-Express 2.0 x16 Slot, 1x PCI-Express 2.0 x1 Slot, 1x PCI Slot.
  • Multi-Graphics: Supports Hybrid CrossFireX Technology, Supports DirectX 10.
  • SATA: 4x SATA2 Ports, Support RAID 0, 1, 10, JBOD.
  • Audio: Realtek ALC887 8-Channel High Definition Audio CODEC.
  • Form Factor: MicroATX, 9.6 x 7.8 inch / 24.4 x 19.8 cm.
Check Stock

6Pcs L298N Motor Drive Controller Board DC Dual H-Bridge Stepper Motor Control and Drives Module for Arduino Micro:bit Smart Car Robot UNO MEGA R3 Mega2560

  • ★L298N as main driver chip makes strong driving ability and strong anti-interference,dual-channel h-bridge driver working mode creates higher working efficiency,,drive stepper dc motors to work.to avoid damage the voltage stabilizing chip, please use an external 5v logic supply when using more than 12v.
  • ★Dual-channel H-bridge driver working mode creates higher working efficiency..
  • ★To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage..
  • ★Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability..
  • ★L298N as main chip. Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors..
Check Stock

AOICRIE 4PCS L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper for Arduino

  • L298N as Main driver chip L298N, strong driving ability, strong anti-interference, low calorific value, afterflow diode protection, more stable and reliable for Arduino projects, Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability..
  • Double H bridge design, can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors, high efficient, To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage..
  • Driving DC motor Because the module is drived by double H bridge,it can drive two motors simultaneously.Input the following driving timing from IN1-IN4 then the speed and direction of the stepper motor can be controlled..
  • Easy to Use No assembly required. This L298N board comes ready to go. Just wire up motors and power, easy to use..
  • Wide Usage Great for DIY Smart Car Robot Power MEGA R3 for Mega2560 Duemilanove, if driving voltage is more than 12V, use external standard 5volt TTL outputs to switch the H-bridge circuits..
Check Stock

8PCS L298N Motor Drive Controller Board Dual H Bridge DC Robot Stepper Motor Compatible with Ardu-ino Electric Projects, Smart Car Robot

  • Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip, Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors..
  • The L298N driver module, using L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface, you can chip circuitry to 5V power supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential..
  • Terminal driver part of the supply area VMS: +5V ~ +35V.
  • Drive part of the peak current Io: 2A / Bridge.
  • Logical part of the terminal power supply range Vss :4.5-5 .5V.
  • Logical part of the operating current range: 0 ~ 36mA.
  • The control signal input voltage range: 4.5-5.5V low 0V high.
  • To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage.
  • High working power to 46v, large current can reach 3A MAX and continue current is 2A, power to 25w..
  • Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability, large capacity filter capacitance,afterflow protection diode, more stable and reliable..
Check Stock

48pcs Impression Mixing Tip Crown&Bridge 1:1 Dental VPS/PVS DX-Mixer

  • DX-Mixer Mixing Tips for Dental Impression - Crown & Bridge 1:1 Ratio.
  • DX-Mixer is identical in size, function, and quality to current mixing tips.
Check Stock

ASRock 970A-G/3.1 Socket AM3+/ AMD 970/ DDR3/ Quad CrossFireX/ SATA3&USB3.1/ M.2/ A&GbE/ ATX Motherboard

  • CPU: Socket AM3+/AM3, Chipset: North Bridge AMD 970 & South Bridge AMD SB950.Supports Socket AM3 processors: AMD Phenom II X6 / X4 / X3 / X2 (except....
  • Memory: 4x DDR3-2400+(OC)/ 2100(OC)/ 1866(OC)/ 1800(OC)/ 1600(OC)/ 1333/ 1066 DIMM Slots, Dual Channel, Non-ECC, Unbuffered, Max Capacity of 64GB.
  • Slots: 2x PCI-Express 2.0 x16 Slots (one runs x4), 2x PCI-Express 2.0 x1 Slots, 1x PCI Slot.
  • SATA: 6x SATA3 Ports, M.2: 1x M.2 Port, Support M.2 PCI-Express 2.0 x4.
  • Ports: 2x USB 3.1 Ports (1 Type-A, 1 Type-C), 4x USB 3.0 Ports (2 rear, 2 via header), 8x USB 2.0 Ports (4 rear, 4 via headers), 1x PS/2 Mouse Port,....
Check Stock

GIGABYTE GA-970A-D3 AM3+ AMD 970 SATA 6Gb/s USB 3.0 ATX AMD Motherboard

  • CPU: Support for AMD AM3+ FX. AM3 Phenom II. Athlon II processor. Chipset: North Bridge: AMD 970, South Bridge: AMD SB950.
  • Memory: 4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory. Dual channel memory architecture..
  • Audio: Realtek ALC889 codec. High Definition Audio. 2. 4. 5.1. 7.1-channel..
  • Expansion Slots: 1 x PCI Express x16 slot, running at x16. 1 x PCI Express x16 slot, running at x4. 3 x PCI Express x1 slots. 2 x PCI slots.
  • Storage Interface: 6 x SATA 6Gb. s connectors. Support for RAID 0, RAID 1, RAID5, RAID 10 and JBOD.
  • 2 x USB 3.0. 2.0 ports. 1 x RJ-45 port. 6 x audio jacks (Center. Subwoofer Speaker Out..
  • Audio: Realtek ALC889 codec. High Definition Audio. 2. 4. 5.1. 7.1-channel. Support for S. PDIF Out..
  • Back Panel Connectors:1 x PS. 2 keyboard. mouse port. 1 x optical S. PDIF Out connector. 8 x USB 2.0. 1.1 ports..
  • Internal I. O Connectors:1 x 24-pin ATX main power connector. 1 x 8-pin ATX 12V power connector..
Check Stock