Categories

Best Spacer Bending Machine

VEVOR Hydraulic Rebar Bender, 3000 Wattage Electric Rebar Bender, 1-1/4'' / 32 mm #10 Grade 60 Max Rebar Diameter, Rebar Steel Bender Machine, Bending Machine for Bending Rebar, Steel Bar, Steel Rod

  • 6-7S Ultra-Fast Bending Speed: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1-1/4" #10 Grade 60(6 to 32 mm) within 6 to 7 seconds. Bending Angle: 0-180°,Bending Radius: 1.97'' / 50 mm, Max. Rebar Hardness: HRC30..
  • 3000W Pure Copper Coil Motor: This portable rebar bender features a 3000W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 26A, Noise: 105 dB(A)..
  • Angle Adjustment Knobs: This rebar bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When operating under point 2, fix angle of point 2 same as or no larger than point 1 of 5 degree, to ensure that under the condition when exterior shock attacks the machine itself will not move to left and right to operate the machine..
  • Sturdy Machine Body: The electric bender machine adopts a sturdy iron machine body and durable Idler Wheel. φ78 / 109 Fixed Idler Wheel ....
Check Stock

VEVOR Hydraulic Rebar Bender, 1700W, Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

VEVOR Hydraulic Rebar Bender 1700 Wattage Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

ComfortStyle Premium Upholstery Tacks, Nailhead Decorative Trim for Furniture, 5/8\ Diameter, 100 Nails (Pewter Nickel)

  • ...uld simply use a little extra character.
  • QUALITY STEEL - The metal nails are made from high quality steel resulting in a very strong and durable nail while maintaining a vintage look. This means less time wasted having to pull out bent nails. Less expensive nailheads are made from cheaper steel and are prone to bending when being installed which results in frustration and lost time.
  • EASY INSTALLATION - These can installed by simply using a rubberized tack hammer and either a nail spacer tool or a set of needle nose pliers. If using a nail spacer tool, follow the directions as indicated by the tool. If using the needle nose pliers, hold the nail portion of the tack in place with the pliers and hammer the tack into a firm wooden surface.
  • IDEAL USES - These rustic nails can be used on all sorts of different furniture and craft projects including headboards, sofas, loveseats, chairs, benches, ottomans. They are even a great note holder on your corkboard at home..
Check Stock

ComfortStyle Premium Upholstery Tacks, Nailhead Decorative Trim for Furniture, 7/16-inch Diameter (100, Black Pearl)

  • ...uld simply use a little extra character.
  • QUALITY STEEL - The metal nails are made from high quality steel resulting in a very strong and durable nail while maintaining a vintage look. This means less time wasted having to pull out bent nails. Less expensive nailheads are made from cheaper steel and are prone to bending when being installed which results in frustration and lost time.
  • EASY INSTALLATION - These can installed by simply using a rubberized tack hammer and either a nail spacer tool or a set of needle nose pliers. If using a nail spacer tool, follow the directions as indicated by the tool. If using the needle nose pliers, hold the nail portion of the tack in place with the pliers and hammer the tack into a firm wooden surface.
  • IDEAL USES - These nails can be used on all sorts of different furniture and craft projects including headboards, sofas, loveseats, chairs, benches, ottomans. They are even a great note holder on your cork board at home.
Check Stock

ComfortStyle Premium Upholstery Tacks, 1-inch Diameter Nailhead Pins, Large Decorative Trim for Furniture (50, Pewter Nickel)

  • PREMIUM GRADE - These nailheads measure 1" in diameter with a 3/4" shank. They are the same nailheads we have been selling to the commercial furniture industry for years and now they are available to you.
  • BEAUTIFUL FINISH - These decorative nails are sure to add beauty to any piece of furniture that needs updating or could simply use a little extra character.
  • QUALITY STEEL - The metal nails are made from high quality steel resulting in a very strong and durable nail. This means less time wasted having to pull out bent nails. Less expensive nailheads are made from cheaper steel and are prone to bending when being installed which results in frustration and lost time.
  • EASY INSTALLATION - These can installed by simply using a rubberized tack hammer and either a nail spacer tool or a set of needle nose pliers. If using a nail spacer tool, follow the directions as indicated by the tool. If using the needle nose pliers, hold the nail portion of the tack in place with the pliers and hammer the tack into a firm wooden surface.
  • IDEAL USES - These nails can be used on all sorts of different furniture and craft projects including headboards, sofas, loveseats, chairs, benches, ottomans. They are even a great note holder on your corkboard at home..
Check Stock

ComfortStyle Premium Upholstery Tacks, 3/4-inch Diameter Nailhead Pins, Large Decorative Trim for Furniture (80, Pewter Nickel)

  • PREMIUM GRADE - These nailheads measure 3/4" in diameter with a 3/4" shank. They are the same nailheads we have been selling to the commercial furniture industry for years and now they are available to you.
  • BEAUTIFUL FINISH - These decorative nails are sure to add beauty to any piece of furniture that needs updating or could simply use a little extra character.
  • QUALITY STEEL - The metal nails are made from high quality steel resulting in a very strong and durable nail. This means less time wasted having to pull out bent nails. Less expensive nailheads are made from cheaper steel and are prone to bending when being installed which results in frustration and lost time.
  • EASY INSTALLATION - These can installed by simply using a rubberized tack hammer and either a nail spacer tool or a set of needle nose pliers. If using a nail spacer tool, follow the directions as indicated by the tool. If using the needle nose pliers, hold the nail portion of the tack in place with the pliers and hammer the tack into a firm wooden surface.
  • IDEAL USES - These nails can be used on all sorts of different furniture and craft projects including headboards, sofas, loveseats, chairs, benches, ottomans. They are even a great note holder on your corkboard at home..
Check Stock

TUMIYA HTV Vinyl - 12\ x 30 Ft Heat Transfer Vinyl, Glossy Adhesive HTV Vinyl … (Silver)

  • 【Easy to use】Heat transfer vinyl rolls are easy to cut and weed, requiring only 10 seconds of hot pressing at multiple fixing points at 284°F (140°C), and be sure to always a cold peel. (Please read carefully)..
  • 【Strong adhesion】Bonnyhtv soft metallic htv vinyl is very resistant to bending and stretching. It is machine washable and durable, just wait 24 hours before the first wash and turn the garment over, your design will stay in good condition even after repeated washes. No fading, no peeling, no cracking..
  • 【DIY Gift】The htv vinyl comes in a variety of styles, radium silver, broken glass, illusion, spacer pattern and more. Choose 12" x 3' to give you more design options. Heat transfer vinyl is used to personalize your custom t-shirts, tote bags, hats, aprons, pillows and more..
  • 【SATISFACTION & RETURNS】 We have been deeply involved in the heat transfer vinyl industry for over a decade, so please trust our superior quality. If you have any discomfort, just return or exchange. If you feel satisfied, welcome to share your design with us..
Check Stock

Spoon Ring Bender, Ring Bending Tool, Spoon Ring Making Machine Tool Kit for Jewelry Spoon Rings Press DIY

  • QUALITY - Our ring bending tool is made of quality steel, and the white ones in this ring making kit are nylon dies, used for softer materials that might scratch or dent..
  • DESIGN - The ring maker machine includes 9 sizes of bending posts of metal, and reusable negative bend pieces of metal and nylon for each post size. This is a multi-functional ring making tool, it works simple and easy to change the dies..
  • DURABLE - Our ring bending machine is sturdy and durable, works for bending silverware and making rings and jewelry, the thickness of the flatware will be the only limiting factor..
  • SIMPLE - It's simple to set the spoon ring maker machine up, and it's fun and easy to make spoon rings with our ring bender machine, for both beginners and practitioners..
  • SERVICE - If you have any questions about our ring bending kit, please feel free to contact us for solutions..
Check Stock

Pilida Bearing Seal Kit Assembly with Shaft and Tool Set W10435302 W10447783 Compatible with Cabrio

  • INCLUDES: 1 - Bearings Kit / 1 – Bearing Seal / 1 – Drive Shaft / 1 –Nut & Spacer / 1 – Bearing Spacer Tube / 1 – Instructional Manual / 1 – Adhesive & Grease Tube / 1 – Metal Push Rod.
  • 【Premium Quality】: The washing machine bearing kit made of Premium Steel. All bearing kit has been well-tested by the manufacturer, to provide continuous stability and longer life.
  • SPECIFICATIONS: Bearing(s) Type(s): Type 1& Type 2 / NBR Double Shield Metal Spacer and Metal Shaft.
  • 【Perfect Compatibility】Please reference our compatibility to ensure our parts are compatible with your component. Fit Whirlpool w10435302, W10447783, 2118925, AH3503261, AP5325033, B00DM8L8DK, EA3503261, EAP3503261, LY-KLH3-ZJ45, PS3503261.
  • 【Quality Service】All washer seal and bearing kit from Pilida have 1Year WARRANTY. Please contact us if you have any compatibility questions.
Check Stock

Siser EasyWeed Heat Transfer Vinyl HTV for T-Shirts 12 x 15 Inches 10 Precut Sheets (Popular Pack, 12\ x 15\)

  • 【Easy to use】Heat transfer vinyl rolls are easy to cut and weed, requiring only 10 seconds of hot pressing at multiple fixing points at 284°F (140°C), and be sure to always a cold peel. (Please read carefully)..
  • 【Strong adhesion】Bonnyhtv soft metallic htv vinyl is very resistant to bending and stretching. It is machine washable and durable, just wait 24 hours before the first wash and turn the garment over, your design will stay in good condition even after repeated washes. No fading, no peeling, no cracking..
  • 【DIY Gift】The htv vinyl comes in a variety of styles, radium silver, broken glass, illusion, spacer pattern and more. Choose 12" x 3' to give you more design options. Heat transfer vinyl is used to personalize your custom t-shirts, tote bags, hats, aprons, pillows and more..
  • 【SATISFACTION & RETURNS】 We have been deeply involved in the heat transfer vinyl industry for over a decade, so please trust our superior quality. If you have any discomfort, just return or exchange. If you feel satisfied, welcome to share your design with us..
Check Stock

GANOPPER 30T 32T 34T Bike Chainring Bash Guard 104BCD Single Speed Narrow Wide Oval Chain Ring Bashguard MTB Mountain Bike Spocket Protector with Bolts Spacer Thim

  • Material: CNC machine AL 6061/T6,Lightweight aluminum bash guard for All Mountain and aggressive XC use.
  • BCD: 104mm ,Shape : Round , Thickness: 4mm,Durable. Diameter:150mm ,Weight:Approx 59.2g(0.13lb).
  • Fit For 104BCD 30T, 32T, 34T Chainring , Super long M8 Crank bolts included(add spacer).
  • Use for Single Speed/Double/Triple Crankset Refitted into 1X,2X System,Considering interference,if your crankset is single speed design ,please add spacer between chainring and bashguard before use.
  • Parcel: Cycling chainring bashguard 1 pcs ,M8 crankset bolts 4sets(2mm spacer incuded).
Check Stock

Happybuy Electric Hydraulic Rebar Cutter, 900W Portable Electric Rebar Cut 5/8' 16mm #5 Rebar within 3 Seconds, 110V

  • 0 - 90 Degrees Excellent Performance: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' to 1" (6 to 25 mm) within 5 seconds. 1/4'' / 6 mm #2 Rebar(0-55°), 1'' / 25 mm #8 Rebar(0-90°). It is able to satisfy your various bending demands..
  • 1500W Pure Copper Coil Motor: This portable rebar bender features a 1500W pure copper coil motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bending machine's operating life to a large extent..
  • Sturdy Machine Body & Head: The electric bender machine adopts the sturdy machine body and high-intensity hook, which are stronger and not easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing..
  • Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the steel, and the piston will return to its origi....
Check Stock