Categories

Best Spacer Installation Video

Craftsman Set of Two 187292, 192870, 532187292, 532192870 Spindle Assembly with Grease Zerk, Husqvarna Poulan

  • Set of two spindle assemblies, includes blade bolts, mounting bolts, pulley locknuts, spacer..
  • Mounting holes have been pre-tapped for easier installation..
  • 187292 are the spindle assembly's with grease fittings. Replace the non-grease fitting 192870 with these also..
  • Spacer must be installed under the pulley..
  • Installing with the spacer on top of the pulley (or failing to use spacer) will result in damage to shaft and pulley..
Check Stock

5 Inch Black Floating House Number, Modern House Number, Premium Zinc Alloy Number for Garden Door Mailbox Street Address Numbers, with Nail Kit and Instruction (Number 3)

  • MODERN DESIGN: Designed to Classic style.When you install it with floating,it will creat 3D effect which bring the numbers a clean modern look..
  • MATERIAL: Made with high-quality zinc alloy and black coating on the surface, antirust, waterproof and long lasting. Black color, can add visual appeal to any space that needs to be identified.
  • SIZE: 5 inches / 12.7 cm in height, 2.8 inches / 7 cm in width, and 0.5 inches / 1.3 cm in thickness.Suitable for house,garden,mailbox,postcode and so one..
  • EASY TO INSTALL: Can be installed floating or flush.Please use the spacer if you need floating installation.The package contains simple installation instructions and can be easy installation with drill gun. Installation method 1: Use a pen to locate, refer to Figure 4 for installation. Installation method 2: Use the attached instruction template, refer to the video installation..
  • PACKAGE INCULDED: One 5 inches house address number, three plastic plugs, three screws, three metal fixing grommets and instructions template..
Check Stock

Muzata PA26 Side Mount Spacer 5/16” in Thickness Quality Aluminum Weldless for Installing 36\ Side Mount Cable Railing Post PF01 PF02 PM05 Edge Extender Nightscape Concrete Deck Stairs (2Pack)

  • Side-mounted Installation - this side mount spacer is specially designed to even up the protruding edge of the landing or staircases. It can be used as an extender to fix the side-mounted post against it. With a thickness of 5/16’’, it can fill in space less than 5/16’’. Once properly installed, it can provide more security and stability.
  • Custom design - This side mount spacer is custom-designed for MUZATA side-mounted posts PF01, PF02, PM05. To install 36" side-mounted posts, pls search PA13 for 1" side mount spacer, PA14 for 2" side mount spacer, PA26 for 5/16" side mount spacer, PA22 for 1/8" side mount fastening kit.
  • Weather protection - This side mount spacer is made of quality aluminum with great rust resistance and will work for a long lifetime. It is ideal for both indoor and outdoor applications like deck, stair, porch, balcony, and fence.
  • Related Products - you might need following products to install the post. Cable railing posts Muzata PM05, surface mount base PA19, level bracket PA20, corner bracket PA21, flat angle bracket PA15, curved angle bracket PA16, side mount spacer PA26 or PA27, drill template CT22, post toolkit PA28.
  • MUZATA is a leading cable railing company that provides premium products with favorable prices. Over years o....
Check Stock

SKYSEN 6FT Sliding barn Door Hardware kit, Barn Door Track, 1/4” Thick Material- Combination Track- Smooth and Quiet- Easy to Install- Black (J Shape-5)

  • ... plastic spacer). The bolts and leg screws are 8.8 grade (Keep the barn door hardware system last for long). The surface is spray black powder coat (Anti-rust, Looks smooth)..
  • [EASY TO INSTALL] Barn door track pre-drilled hole space is 16", Step by Step Instruction included. Our Instruction is listing every step for installation from A to Z. You can finish the installation of barn door hardware kit in half an hour if you get 2 workers. In case you get any problem or missing parts during installation, please free feel to contact us via amazon..
  • [IF MY BARN DOOR FIT THIS SIZE] 6FT Barn door hardware kit fit for door panel width up to 36”, Fit for door thickness from 1-3/8" to 1-3/4"(If you your barn door panel is too thin, then you can using the 5mm black spacer pad inside package, if your barn door is too thick, then you need to buy longer bolt extra). If you have a door way trim, then you need to buy an extra trim board to install the barn door track or just remove your trim..
  • [WHY US] Get super quality barn door hardware kit from us, All the barn door track and barn door roller have been inspected in factory before delivery, Also they have been Passed 100,000 times opening and closing test to ensure the barn door hardware kit you get will works fine.....
Check Stock

Muzata PA25 Side Mount Fastening Kit 1/8\ Stainless Steel Weldless for 42\ Cable Railing Side Mount Post PF01 PF02 Tread Reinforced Board Wood Concrete Deck Stairs 2Pack

  • Side-mounted Installation - This reinforced board is used to strengthen the board of the landing or staircases where the 42’’ side-mounted post can be installed against it. With this 1/8" side mount fastening kit, you can clamp the board tightly with fastening bolts, widening the bearing area and reinforcing the installation of the 42’’ side-mounted post. Once properly installed, it can provide more security and stability.
  • Custom design - This side mount fastening kit is custom-designed for MUZATA side-mounted posts PF01 and PF02. It can also be used as side mount spacer. To install 36" posts, pls search PA13 for 1" side mount spacer, PA14 for 2" side mount spacer, PA22 for 1/8" side mount fastening kit. To install 42" posts, pls search PA23 for 1" side mount spacer, PA24 for 2" side mount spacer, PA25 for 1/8" side mount fastening kit.
  • Weather protection - This side mount fastening kit is made of quality T304 stainless steel with great rust resistance and will work for a long lifetime. It is ideal for both indoor and outdoor applications like deck, stair, porch, balcony, and fence.
  • SpaceSaver system - Except for the side mount fastening kit, a complete cable railing system can include posts (PF01 PF02), handrails (Muzata HT10 for flat, HT2....
Check Stock

MOSNAI Yamaha Golf Cart Springs for G14, G16, G19, G20, G22, G29 Golf Cart Heavy Duty Rear Springs(2 PCS Black)

  • ✅【Compatible】：Yamaha Heavy Rear Springs fit Yamaha Gas and Electric G14, G16, G19, G20, G22, G29 Drive Golf Carts.(Only Fit OEM/ Factory Rear Shocks ).
  • ✅【Repalce Factory Yamaha Rear Shocks Springs 】 Heavy Duty Rear Coil Springs Replace OEM/ Factory Yamaha Rear Shocks Black Coils Springs..
  • ✅【Safety】These Yamaha Golf Cart HD Springs Save The Sag Problem When With Rear Seats,Cargo Boxes Or Lift Kit.Help Your Golf Cart With Great Ride And Added Stability Even With High Speed..
  • ✅【Easy Installation】With A Extra Wrench,Just Follow the Manual or watch a video on YouTube to Install the Yamaha heavy rear spring..
  • ✅【Package Include】 2 New Yamaha Heavy Rear Shock Springs, 2 New Sets Of Spacer Clamps And Screws, 1 Simple Wrench, 1 Installation Instruction Manual..
Check Stock

Supreme Suspensions - 3 Front + 3 Rear Full Suspension Lift Kit for 2007-2020 Chevrolet Silverado & GMC Sierra 1500 2WD 4WD [Black]

  • COMPATIBLE WITH 2007 - 2020 Chevrolet Silverado 1500 & 2007 - 2020 GMC Sierra 1500 (6-LUG - 2WD 4WD). *Does NOT fit 2007 Classic Models or 2019+....
  • CONTENTS: (2x) Billet Aluminum Lift Strut Spacers, (2x) High Strength Steel Tapered Lift Blocks, (4x) Square Bend U-Bolts, Installation Hardware,....
  • TECHNICAL NOTES: 3 inch front and 3 inch rear suspension lift. Please note that front spacer thickness to lift height is not a 1:1 ratio. Strut spacer....
  • INSTALLATION: Easy 2-4 hour installation process*. No Special Tools Required! *An alignment is always recommended if you are altering the height of....
  • NOTE FOR Z71 / LTZ OWNERS: *Some LTZ/Z71 Models have factory rear blocks pre-installed! Rear lift height will vary depending on the size of the....
Check Stock

EZISOE 4PCS 5x4.5 Wheel Spacers 0.59 inch, 5x114.3 Black Wheel spacers 64.1mm Hub Centric with 12x1.5 Studs, Replacement for RDX TLX CDX CSX ILX RSX TSX

  • Replacement for Wheel Spacers: Compatible with 1991-2005 NSX (Rear Axle ONLY), 2002-2006 RSX, 2004-2014 TSX, 2001-2004 CL, 1997-2001 Integra Type R, 1999-2008 TL, 2003-2006 MDX, Honda: 1998-2014 Accord, 2006-2014 Civic, 1997-2014 CRV, 2003-2006 Element, 1995-2004 Odyssey, 1997-2002 Prelude, 2000-2008 S2000 (Rear Axle ONLY), 2010-2014 CR-Z, 2003-2008 Pilo.
  • 5x4.5 (5x114.3mm) Wheel Spacers Spec: Set of 4, 15mm thickness per spacer, Hubcentric: 64.1mm, Thread Pitch: 12x1.5.
  • Installation: It is recommended that the wheel spacers be installed by professionals. A torque wrench is required for installation, and an electric wrench cannot be used.Please read the installation instructions carefully, you can also contact us, we will provide you with the installation video.
  • Performance: EOTH wheel spacers not only improve the stability and handling of your vehicle, but also give your vehicle an extra aggressive look.
  • Warranty: We provide 1 year warranty. If the product has any quality problem, you can contact us at any timeWe will reply you within 24 hours.
Check Stock

Supreme Suspensions - Full Lift Kit for 2005-2011 Dodge Dakota 3 Front Lift Torsion Keys + 2 Rear Lift Blocks + Round Bend U-Bolts 2WD

  • COMPATIBLE WITH 2005 - 2011 Dodge Dakota (2WD)..
  • CONTENTS: (2x) T6 Billet Aluminum Front Strut Spacers, (2x) High-Strength Steel Rear Lift Blocks, (4x) Round Bend U-Bolts, Installation Hardware,....
  • TECHNICAL NOTES: 3 inch front and 2 inch rear suspension lift. Please note that front spacer thickness to lift height is not a 1:1 ratio. Strut spacer....
  • INSTALLATION: Easy bolt-on installation takes 3 to 6 hours without the need for special tools. *An alignment is always recommended if you are altering....
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires..
Check Stock

Pandora Jewelry Pave Cocktail Glass Dangle Cubic Zirconia Charm in Sterling Silver

  • ✤ INSTRUCTION ATTENTION ✤ If you can not put this charm on your bracelet, ① Please get the rubber ring out of the silver ring,then put the rubber rung on your bracelet or chain. ② Put the silver ring on your bracelet or chain. ③ Please out the rubber ring into the silver ring again. See video for details..
  • ✤ APPLICATION ✤ SIZE:Silver Spacer Charm Stoppers:0.30 x 0.14 inch (7.56 x 3.57 mm).
  • Hole size extends from 2.5mm to 4.5mm, suit for bracelet diameter size 003c3.5mm(0.14”)..
  • ✤ Key Product Features ✤ Stoppers charms for pandora bracelets, compatible with trollbeads, biagi, chamilia and other European charm bracelets.Use as a filler stopper or spacer, keeping your bead in place, stop the charms..
  • ✤ MATERIAL ✤ 925 Sterling Silver & Rubber inner. Solid and Durable Design, avoid getting any sensitivity or allergy issues when wearing the charms..
  • ✤ PERFECT GIFT ✤ 2pcs S925 Silver Spacer Charms Stopper, comes in a Polish Cloth. Ideal gifts for Valentines Day, Mothers Day, Women's Day,Christmas, Anniversary and Birthday etc..
Check Stock

Vipcar 4 Pack 1.5 in Hub Centric Wheel Spacer 14x1.5 Bolts-on, 6x135 to 6x135mm Bolt Pattern, 87.1mm Hub Bore, for Ford 2015-2022 F150 2.7L-5.0L, 2015-2022 Expedition 3.5L, Lobo 3.5/5.0L, Navigator

  • ...ainst the liners, brakes, or other suspension parts, by creating additional space between tires and hubs also being a great solution for complex and costly staggered/negative offset wheel setup, making your vehicle more aggressive, tougher, and stable, allowing lift/lowering kits, larger calipers, or traction tires installation..
  • 【Installation】It’s pretty easy to install if you're a skilled mechanic and you got the correct spacers, however, we do not wanna stress too much about how easy or helpful it was and the time that will save as well as your money, Kindly Read the Description Content and Make it Fit First, Professional Installation was Recommended..
  • 【Warranty & Service】ALL VIPCAR wheel spacers backed in 24 Month/50,000 Miles Warranty. For any pre or after-sale replacements or performance questions or solutions, just email us and we will provide a professional, friendly, and supportive reply within 24 hours, let's hit it!.
Check Stock

Retro Self Adhesive 12-Inch Vinyl Floor Tiles, 20 Tiles - 12\ x 12\

  • PACK OF 40 FOR LARGER AREA FLOORING-Save your time to find perfect gaps of 1/2 or 1/4, making flooring installation high efficiently..
  • PREMIUM QUALITY & REUSABLE-This flooring spacer tool for flooring installation is made of quality ABS materials, superior durability, impact-resistant, and built to last and reusable..
  • EASY TO OPERATE & REMOVE-With it's triangle design, spacer blocks are more stable than rectangular/ wedge ones.Neccessary tools to get proper flooring expansion gap, commonly used for LVP/vinyl /hardwood planks/laminate/wood flooring.
  • UPGRADE FLOORING SPACERS-Featured quarter inch and 1/2 inch gap (8-15mm) in 1, MinliGUY floor spacers help you to install floors more smoothly. Simple to place the spacers, it will be stable at the wall..
  • WELL PACKED-Including 40Pcs floor spacers, ideal for amateur, home owner, contractor, or other professional use..
Check Stock

MAXRACING 2-Inch Suspension Leveling Kit Compatible with 2005-2021 F250 F350 Super Duty 4WD

  • COMPATIBLE VEHICLES: 2005-2021 F250 F350 Super Duty 4WD (Does not fully level 2017 models).
  • MATERIAL: The spacer is manufactured from billet aluminum to match you factory suspension. Resistant against wear and tear..
  • FEATURE: Improves the look of your vehicle and increases ground clearance. Levels the front with the rear of the vehicle.The slight lip makes the spacer easily locks in. This lift kit Will raise the front of your F250 or F350 Superduty by a true 2"..
  • EASY TO INSTALL: Simple bolt-on installation and requires no cutting or modification of factory installed parts..
  • ITEM SPECIFICS: Package includes: 2 x 2 inch Front Leveling Spacers, 2 x bolts,1 x instructions.
Check Stock