Categories

Best Spacer Screws

Teak Tuning Fingerboard Spacer Trucks with Standard Tuning, Silver - 32mm Width - Tuned & Assembled

  • SPACER TRUCKS || Set of two, 32mm basic fingerboard spacer trucks that provide quality performance and simplicity all in one. Fits decks measuring between 29 - 35mm wide.
  • TUNED & ASSEMBLED || Trucks are both assembled and tuned, ready to be attached to your fingerboard. All necessary hardware is included - 6 nuts, 8 black screws, 4 spacers, and 1 tool.
  • SMOOTH FINISH || Trucks are painted silver and have a smooth, glossy finish. Paint will wear down over time, just like regular skateboard trucks.
  • COMPATIBILITY || Teak Tuning spacer trucks are compatible with all types of single and dual bearing fingerboard wheels.
  • FOR RIDERS OF ALL SKILL LEVELS || Perfect for riders of all skill levels. Includes a free Teak Tuning sticker. Choking Hazard: Small Parts. Not suitable for children 14 and under.
Check Stock

Teak Tuning Fingerboard Spacer Trucks with Standard Tuning, White - 32mm Width - Tuned & Assembled

  • SPACER TRUCKS || Set of two, 32mm basic fingerboard spacer trucks that provide quality performance and simplicity all in one. Fits decks measuring between 29 - 35mm wide.
  • TUNED & ASSEMBLED || Trucks are both assembled and tuned, ready to be attached to your fingerboard. All necessary hardware is included - 6 nuts, 8 black screws, 4 spacers, and 1 tool.
  • SMOOTH FINISH || Trucks are painted white and have a smooth, glossy finish. Paint will wear down over time, just like regular skateboard trucks.
  • COMPATIBILITY || Teak Tuning spacer trucks are compatible with all types of single and dual bearing fingerboard wheels.
  • FOR RIDERS OF ALL SKILL LEVELS || Perfect for riders of all skill levels. Includes a free Teak Tuning sticker. Choking Hazard: Small Parts. Not suitable for children under the age of 14.
Check Stock

NewTechWood PCHFS50 50-Square Feet Composite Decking Hidden Fastener, Black

  • Kit includes 175 BLACK hidden deck clips, 190 #8x2” black T15 stainless steel screws, driver and drill bits plus gap spacer tools.
  • 175 count kits will fasten 100 Sq. Ft. of decking (16" on Center).
  • Use with pre-grooved 5/4 or 1x hardwoods, composites and PVC material.
  • Stainless Steel Insert molded inside the deck fastener prevents overdriving of the Screw during installation.
  • Spacer leg automatically sets the gap between boards for consistent spacing.
Check Stock

Geekworm Raspberry Pi Installation Tool 132 Pcs/Lot M2.5 Series Hex Brass Spacer/Standoff + Nuts + Screws w/Storage Case Raspberry Pi 4/3 Model B+(Plus) / 3B / Zero W/2W Accessories Kit

  • Popular Size: As a reason of Raspberry Pi HAT design: GPIO Pin connection (Expansion board) is about 11 mm high and the screw hole diameter is 2.75 mm, this spacer & screw & nuts pack is a perfect installation tool for Raspbery Pi 4 Model B, Raspberry Pi 3 Model B+ / 3B / 2B /B+/3A+/A+..
  • Durable material and long use life: standoffs are made of durable brass,screws and nuts are made of stainless steel which anticorrosive,strong,compact and portable..
  • Note: 1. Compatible with 2019 latest Raspberry Pi 4 Model B, Raspberry Pi 3 Model A+ / Raspberry Pi 3 Model B+ (B plus).
  • 2. The above numbers behind M are for spacer/screw/nut tooth diameter x length, the unit is mm. Example: M2.5 x 5mm Screws..
  • M2.5 Series standoffs + nuts + screws,Quantity: 132pcs,come with the plastic storage box to protect and storage..
Check Stock

VICASKY Auto Hood Spacer Riser Kit Aluminum Alloy Engine Turbine Ventilation Riser Automotive Air Conditioning Hub Spacers for 6mm Turbos Motor Universal Titanium

  • Premuim quality spacer riser kit is manufactured from aluminum alloy, it is characterized through its high hardness and durable.
  • In screws with nuts, the function of the spacer is to increase the area, reduce the pressure and protect the parts and screws.
  • The spacers provide better cooling and airflow effect for all your motor or turbos applications. Stable and reliable performance.
  • Standard size, the diameter of the screw is 6mm/0.2in. Perfectly suitable for large motor swaps for an additional space to allow adequate clearance.
  • Strong and durable finish, clean and bright appearance, withour rust /fading and add a touch of ultimate touch to your car.
Check Stock

Teak Tuning Fingerboard Spacer Trucks with Standard Tuning, Side Show - Gold and Silver - 32mm Width - Tuned & Assembled

  • SPACER TRUCKS || Set of two, 32mm basic fingerboard spacer trucks that provide quality performance and simplicity all in one. Fits decks measuring between 29 - 35mm wide.
  • TUNED & ASSEMBLED || Trucks are both assembled and tuned, ready to be attached to your fingerboard. All necessary hardware is included - 6 nuts, 8 black screws, 4 spacers, and 1 tool.
  • SMOOTH FINISH || Trucks are painted silver and gold and have a smooth, glossy finish. Paint will wear down over time, just like regular skateboard trucks.
  • COMPATIBILITY || Teak Tuning spacer trucks are compatible with all types of single and dual bearing fingerboard wheels.
  • FOR RIDERS OF ALL SKILL LEVELS || Perfect for riders of all skill levels. Includes a free Teak Tuning sticker. Choking Hazard: Small Parts. Not suitable for children under the age of 14.
Check Stock

MOUNTUP M8 Screws for Samsung TV, M8x45mm VESA TV Mounting Bolts Screws for Samsung TV with Washers & 25mm Long Spacers, Universal TV Mount Bolts for Most TVs, MU0041-A

  • Buy What You Need: Focus your budget on what you really need. This M8 TV mounting bolts kit contains hardware for TV VESA panel attachment only..
  • Multiple Combinations: Our TV mounting kits come with M8x45mm screws, M8x10mm spacer, M8x5mm spacer, M8 washer. You will get 5 screw length patterns to meet the TV screw depth (see your TV Manual) with the washers and spacers: 43mm, 38mm, 33mm, 28mm, 23mm..
  • Compatibility: Universal Bolts & Screws fit most TV brands such as Samsung, LG, Sony, Vizio, Philips, Sharps, etc. The pack includes different combinations of screws, washers and spacers works for most flat or curved TV mounting..
  • Ease of Use: The size of the M8 screws and spacers are specially designed for Large TVs. Easy to install with Phillips head screwdriver and hold your TV securely and firmly..
  • Friendly Customer Service: Have any questions about the specification or installation? We are glad to provide help on pre-purchase or installation questions for our customers at any time..
Check Stock

Fastenmaster Cortex for Decks Hidden Fasteners - Trex Transcend Tiki Torch 100 Lin.ft

  • Kit includes 175 BLACK hidden deck clips, 190 #8x2” black T15 stainless steel screws,driver and drill bits plus gap spacer tools.
  • 175 count kits will fasten 100 Sq. Ft. of decking (16" on Center).
  • Use with pre-grooved 5/4 or 1x hardwoods, composites and PVC material.
  • Stainless Steel Insert molded inside the deck fastener prevents overdriving of the Screw during installation.
  • Spacer leg automatically sets the gap between boards for consistent spacing.
Check Stock

SKYSEN 6FT Sliding barn Door Hardware kit, Barn Door Track, 1/4” Thick Material- Combination Track- Smooth and Quiet- Easy to Install- Black (J Shape-5)

  • [SUPER QUALITY RAW MATERIAL] Barn door hardware kit are made of 1/4” thick carbon steel (Maximum load 265lbs). Barn door wheel are made of POM (Stronger than plastic or nylon). Barn door spacer is also made of carbon steel (More stable than other plastic spacer). The bolts and leg screws are 8.8 grade (Keep the barn door hardware system last for long). The surface is spray black powder coat (Anti-rust, Looks smooth)..
  • [EASY TO INSTALL] Barn door track pre-drilled hole space is 16", Step by Step Instruction included. Our Instruction is listing every step for installation from A to Z. You can finish the installation of barn door hardware kit in half an hour if you get 2 workers. In case you get any problem or missing parts during installation, please free feel to contact us via amazon..
  • [IF MY BARN DOOR FIT THIS SIZE] 6FT Barn door hardware kit fit for door panel width up to 36”, Fit for door thickness from 1-3/8" to 1-3/4"(If you your barn door panel is too thin, then you can using the 5mm black spacer pad inside package, if your barn door is too thick, then you need to buy longer bolt extra). If you have a door way trim, then you need to buy an extra trim board to install the barn door track or just remove your trim..
Check Stock

Glaks 150Pcs 10 Sizes ABS Plastic Round Spacer Assortment Kit, OD 11mm ID 6.2mm for M6 Screws, Round Straight Tube, Plastic Standoff (3mm, 4mm, 5mm, 8mm, 10mm, 12mm, 15mm, 18mm, 20mm, 25mm)

  • ★ Product Type: High quality plastic round straight tube standoffs spacer assortment kit for m6 screws..
  • ★ Size: OD 11mm/ 0.43", ID 6.2mm/ 0.24'', Length 3 to 25mm, for M6 screws..
  • ★ Package Detail: In this set, we offer 10 kinds of round spacers Length is 3mm 4mm 5mm 8mm 10mm 12mm 15mm 18mm 20mm and 25mm, each for 15pcs, total 150pcs packed in a plastic box for easy storage..
  • ★ Product Material: All the spacer are made of ABS material, color is creamy white. Beautiful appearance when installed..
  • ★ Premium Spacers: These spacers are strong and reliable, easy to install and durable to use. These are not threaded and clearance for m6 screws..
Check Stock

Steelman Heavy-Duty Tire Valve Stem Puller/Installer Automotive Tool, Notched Polyvinyl Spacer to Protect Wheels and Provide Anchor Points, Pivoting Head, Durable Steel, Comfortable Grip

  • Durable steel - durable steel construction with polyvinyl spacer to protect wheels and rims from possible damage.
  • Notched spacer - vinyl spacer has 5 notches on each side to help provide a secure anchor point on rims during use.
  • Pivoting head - pivoting head freely rotates and is designed to work with most aftermarket wheels and rims.
  • Threaded head - swivel head screws onto valve thread for easy installation and removal of stems without having to remove the valve core.
  • Comfort grip - dual layer handle is ergonomically designed to provide a secure, non-slip grip.
Check Stock

Pegboard Mounting Kit, Includes Screws, Spacers and Washers for 1/8-Inch and 1/4-Inch Pegboard (72 Pieces)

  • Easy to install: these pegboard mounting accessories are easy to install and use, minimal tools needed, just a screwdriver and level (power screwdriver recommended, not included).
  • Suitable for most pegboards: the pegboard mounting and spacer kit can be widely applied to most standard sizes of pegboards, including 1/4 inch and 1/8 inch pegboard (thickness not exceeding 1/4 inch).
  • Reliable to use: the screw and washers are made of steel, sturdy and sustained, not easy to break or deform, the spacer is made of rubber, flexible and serviceable to serve you for long time.
  • Applicable occasions: the pegboard mounting kit required to mount a pegboard to the wall is included in our package, the designed spacers stay on the screws while mounting, which can be applied for mount pegboard on wood stud, hollow and concrete walls.
  • Pegboard mounting kit: package comes with 72 pieces pegboard mounting kits, including 24 pieces screws, 24 pieces washers and 24 pieces spacers, enough quantity to meet your needs and replacements.
Check Stock

Basco 1/4 in. Sliding Shower Door Parts (Infinity)

  • Improve your shower door's performance for a fraction of the cost: Basco Infinity 4400 & 4500 sliding door parts pack.
  • Bottom Guide: Help your 1/4 inch thick glass smoothly slide by replacing your bottom guide. Bottom guide gives glass panels proper spacing.
  • Vinyl Bumpers: Prevent glass door panels from hitting metal wall jambs.
  • 4 black 1-7/16 inch bumpers for wall jamb includes screws and inserts.
  • (6) Plastic wall anchors and (6) wall jamb screws included.
  • Basco Infinity Sliding door parts pack contains: wall anchors, nylon spacer, #8 truss head screwed, bottom guide, #6 pan head screws, molded bumpers, bumper inserts, & Allen wrench.
Check Stock