Categories

Best Speaker Systems

Acoustic Audio by Goldwood Acoustic Audio AA35CB Indoor Center 3 Way Speaker 400 Watts Black Bookshelf, 3-Inch

  • BOOKSHELF WIRED CENTER SPEAKER – Traditional passive speaker design, simply drive power from your amplifier or receiver.
  • HIGH QUALITY – Full Range 2-way sound coverage with dual 3″ Polypropylene woofers, 1″ soft dome tweeter, frequency response is 70Hz-20 kHz with 92dB at 8ohm.
  • DURABLE AND STYLISH – Black ABS sealed cabinet with spring loaded raw wire connectors. Big sound from a compact speaker size of (H x W X D) 4.125″ x 9.625″ x 3.875″.
  • SYSTEM REQUIREMENTS – Any amp or receiver with raw speaker wire outputs, power from your amp should be no less than 20 and no more than 200 watts per channel, CL3 or raw speaker wire to connect your amp to the speaker.
  • WHAT’S IN THE BOX – 1 Acoustic Audio by Goldwood AA35CB center channel speaker, instruction manual. Use for home theater systems and surround sound systems.
Check Stock

Theater Solutions C1 Bookshelf Center Channel Speaker Surround Sound Home Theater Black

  • BOOKSHELF WIRED CENTER SPEAKER - Traditional passive speaker design, simply drive power from your amplifier or receiver.
  • HIGH QUALITY - Full Range 2-way sound coverage with dual Bi-laminate composite cone, balanced and shielded woofers, titanium coated, Ferro Fluid cooled shielded tweeter, 3KHz, 18dB per Octave crossover, frequency response is 70Hz-22 kHz with 91dB at 8ohm.
  • DURABLE AND STYLISH - CARB Compliant MDF wood cabinet, black ash wood grain veneer finish, spring loaded raw wire connectors, acoustically transparent grill. Big Sound from a compact speaker size of (H x W X D) 6.5" × 18" × 7.5".
  • SYSTEM REQUIREMENTS - Any amp or receiver with raw speaker wire outputs, power from your amp should be no less than 15 and no more than 200 watts per channel, CL3 or raw speaker wire to connect your amp to the speakers.
  • WHAT'S IN THE BOX - 1 Theater Solutions by Goldwood C1 center channel speaker, instruction manual. Use for home theater systems and surround sound systems.
Check Stock

GearIT 10 Gauge Speaker Wire (50 Feet), Copper Clad Aluminum, CCA Thick Gauge Copper Wire for Stereo, Surround Sound, Home Theater, Radio (Black, 50 Feet)

  • 10 GAUGE THICK SPEAKER WIRE - GearIT Speaker Cable copper wires come in stranded copper wire designs, long or short wire lengths, and thin or thick copper wires. Suitable for 12V wire gauge (12 volt wire gauge), but max voltage of 30V..
  • COPPER CLAD ALUMINUM (CCA) - Solid bulk speaker wires made of cca are lower priced than pure bare copper wire for the same conductivity with an aluminum core. GearIT CCA Speaker Cables provide the same conductivity with slightly higher resistance..
  • SURROUND SOUND SPEAKER WIRE SETUP -  Our thick audio wire and speaker wires are perfect for home stereo sound system setup, home theater, center channel speakers, tower speakers, bookshelf speakers, house sound systems, radios, loudspeakers, and more. Compatible with Klipsch, Sony, Onkyo, JBL, Yamaha and other speaker systems.
  • SOUND WIRE WITH POLARITY - GearIT 10 Ga Speaker Wire audio sound cables come with colored pvc jacket for easy polarity identification. Typically, red speaker wire (light color) is positive and black speaker wire (dark color) is negative..
  • FOR INDOOR STEREO, HOME THEATER SPEAKERS - Our GearIT sound wire cable comes in 25ft, 35ft, 50ft, 75ft, 100ft, 200ft, 250ft lengths and black, white, transparent black/blue, transparent black/red, transparent black....
Check Stock

GearIT 10 Gauge Speaker Wire (100 Feet), Copper Clad Aluminum, CCA Thick Gauge Copper Wire for Stereo, Surround Sound, Home Theater, Radio (Black/Clear, 100 Feet)

  • 10 GAUGE THICK SPEAKER WIRE – GearIT Speaker Cable copper wires come in stranded copper wire designs, long or short wire lengths, and thin or thick copper wires. Suitable for 12V wire gauge (12 volt wire gauge), but max voltage of 30V..
  • COPPER CLAD ALUMINUM (CCA) – Solid bulk speaker wires made of cca are lower priced than pure bare copper wire for the same conductivity with an aluminum core. GearIT CCA Speaker Cables provide the same conductivity with slightly higher resistance..
  • SURROUND SOUND SPEAKER WIRE SETUP -√É‚ÄÃ√ì† Our thick audio wire and speaker wires are perfect for home stereo sound system setup, home theater, center channel speakers, tower speakers, bookshelf speakers, house sound systems, radios, loudspeakers, and more. Compatible with Klipsch, Sony, Onkyo, JBL, Yamaha and other speaker systems.
  • SOUND WIRE WITH POLARITY – GearIT 10 Ga Speaker Wire audio sound cables come with colored pvc jacket for easy polarity identification. Typically, red speaker wire (light color) is positive and black speaker wire (dark color) is negative..
  • FOR INDOOR STEREO, HOME THEATER SPEAKERS – Our GearIT sound wire cable comes in 25ft, 35ft, 50ft, 75ft, 100ft, 200ft, 250ft lengths and black, white, transparent black/blu....
Check Stock

Acoustic Audio PSC-32 Center Channel Speaker 125 Watt 2-Way Home Theater Audio

  • Acoustic Audio PSC-32 indoor Black full range center Channel speaker, recommended power is 15-125 watts, Frequency response is 85hz-20 kHz, efficiency is 89dB, 8ohm, 2-way passive design.
  • Two 3″ Full range woofers, mounting hang tab on back, quick Release spring loaded wire terminals, video shielded, digitally tuned bass reflex cabinet Enclosure, acoustically transparent grill.
  • Black ash wood grain veneer finish, speaker size (H x W x D) is 4. 21″ X 10. 03″ X 4. 92″, designed and engineered in the USA, full instructions included.
  • Use for surround sound, home theater, multiple room systems, center Channel speaker, Industrial sound systems, bookshelf, bathrooms, kitchens.
  • This Listing and price is for 1 indoor speaker.
Check Stock

Acoustic Audio WS1005 Passive Subwoofer Amp 200 Watt Amplifier for Home Theater

  • To be used with Passive Subwoofers only ,In Wall or In Ceiling Home Entertainment,Home Theater Systems,Industrial Sound Systems ,Multiple Room Systems.
  • Power Amplifier Output: 200 Watts, Low Bass Frequency Response of 50 – 200 Hz +/- 3dB.
  • Output Impedance: 4-8 ohm. CL3 Rated in wall certified raw speaker wire to connect your amp to the speaker.
  • LFE and RCA Inputs for use from a home audio receiver. Raw wire outputs..
Check Stock

EBS OctaBass Blue Label Triple Mode Octave Divider Pedal

  • Blue octave LW82 linear Series two way home 8" In Wall speakers, recommended power is 10 to 300 watts per speaker, efficiency is 97dB, frequency response is 30hz-25 kHz.
  • 8" Aerated blue IMPP Cone woofers with Butyl rubber Surrounds for longer life, 8ohm impedance, 1" Pivoting pei dome tweeters, spring loaded raw wire connections.
  • Paint-able frames and grills, low profile housings designed for easy installation, unique wall locking mounting system, no mounting hardware needed, cut-out templates and full instructions included.
  • Cut out Size is 8. 7" X 12. 72" Per speaker, overall size is 10" X 14. 13" Per speaker, mounting depth is 4" Per speaker, Designed and engineered in the USA.
  • Use for home theater, surround systems, whole house, multi-room Audio systems, covered outdoor areas, Commercial, office, retail applications, package Contents is 1 pair/ 2 in Wall speakers.
Check Stock

L-Shaped Banana Plugs, Right Angle 4mm Pure Copper 24k Gold Plated Speaker Banana Plug Connector, YOUCHENG, for Speaker Cable, Audio/Video Receivers, Amplifiers (2 Pair Red and Black

  • The speaker banana plug makes the installation of the speaker cable easy, very suitable for use with A/V receivers, amplifiers, surround sound systems, banana wall panels.
  • Our banana plugs accept speaker wires from 12AWG to 18AWG. Each pair of plugs has a black circle and a red circle to color-code the speaker cable for easy polarity identification.
  • The gold-plated plug has higher corrosion resistance, conductivity and oxidation resistance, which can ensure stable current transmission and high-fidelity audio..
  • The 90° right angle speaker banana plug is perfect for any speaker wire connection. Detachable design, compact size, easy to use, convenient and quick operation, double screw design can achieve quick locking, plug and play, no soldering, pin design, just put the wire inside and tighten it..
  • 4mm speaker banana plugs are used for speaker cables, wall panels, home theaters, audio/video receivers, amplifiers and sound systems.
Check Stock

2Pcs 500W Car Audio High Power Stereo Speaker with 4pcs Mounting Screws Car Audio System Universal

  • WIDE RANGE OF APPLICATIONS£ºThis high power stereo speaker is a 100% brand new product. Stereo speakers are widely used in all car audio systems. There are different concerns about adaptation. This product is manufactured in strict accordance with the highest standard parameters, so you can choose with confidence..
  • PREFERRED QUALITY£ºThis car audio high power stereo speaker is produced by a professional audio factory and is made of highquality steel mesh and heatresistant resin materials. It has the characteristics of high hardness, sturdiness, corrosion resistance, not easy to rust, and long service life. After the modific....
Check Stock

Esinkin Bluetooth Audio Adapter + AC to DC Power Adapter

  • Listen music wireless: Connect with computer speakers, home stereo systems or other speaker systems via the 3.5 mm or RCA cable, then pair with the Bluetooth audio devices such as smartphones or tablet for streaming music..
  • Easy setup and automatic reconnect: Pair your device to the adapter once with a single button press. It can reconnect automatically with the previously paired device..
  • Wireless range: Indoors(without obstacles) connect rang up 30-40 ft (10-12 m)..
  • Works with most device: Bluetooth enabled device including smartphones, tablets, computers, laptops upon and any powered PC speakers, home stereo systems and A/V receivers..
  • NOTE: This adapter doesn't have built-in battery, power by AC to DC power adapter or USB cable. This product is a bluetooth receiver ONLY, not a bluetooth transmitter. Only to give Bluetooth capabilities to an existing stereo / powered speaker / PA..
Check Stock

esinkin Bluetooth Audio Adapter + USB to DC Charging Cord

  • Listen music wireless: Connect with computer speakers, home stereo systems or other speaker systems via the 3.5 mm or RCA cable, then pair with the Bluetooth audio devices such as smartphones or tablet for streaming music..
  • Easy setup and automatic reconnect: Pair your device to the adapter once with a single button press. It can reconnect automatically with the previously paired device..
  • Wireless range: Indoors(without obstacles) connect rang up 30-40 ft (10-12 m)..
  • Works with most device: Bluetooth enabled device including smartphones, tablets, computers, laptops upon and any powered PC speakers, home stereo systems and A/V receivers..
  • NOTE: This adapter doesn't have built-in battery, power by AC to DC power adapter or USB cable. This product is a bluetooth receiver ONLY, not a bluetooth transmitter. Only to give Bluetooth capabilities to an existing stereo / powered speaker / PA..
Check Stock

Acoustic Audio HDS10 in Wall 10" Home Theater Passive Subwoofer Speaker

  • Integrated wall-lock mounting system, cut out template included, Cut out is 10. 625″ X 10. 625″, overall is 12″ X 12″, mounting depth is 3. 75″, designed and engineered in the USA.
  • 10″ Woofer, Woven fiber bulletproof Cone, Butyl rubber surround for increased performance, paintable frame and grill, low profile housing, instructions included.
  • Use for in wall or in ceiling home entertainment, surround sound, home theater, multiple room systems, Industrial sound systems.
  • Acoustic Audio HDS10 passive in wall Sub speaker, recommended power is 20-300 watts, Frequency response is 26hz-200hz, efficiency is 98dB, 8ohm, spring loaded speaker wire terminals.
  • This Listing and price is for 1 in Wall passive Sub speaker, This passive Sub requires the Ws1005 Sub amplifier or a sub amp with similar specifications.
Check Stock

esinkin Bluetooth Audio Adapter + RCA to 3.5mm Adapter Audio Cable -5 Feet

  • Listen music wireless: Connect with computer speakers, home stereo systems or other speaker systems via the 3.5 mm or RCA cable, then pair with the Bluetooth audio devices such as smartphones or tablet for streaming music..
  • Easy setup and automatic reconnect: Pair your device to the adapter once with a single button press. It can reconnect automatically with the previously paired device..
  • Wireless range: Indoors(without obstacles) connect rang up 30-40 ft (10-12 m)..
  • Works with most device: Bluetooth enabled device including smartphones, tablets, computers, laptops upon and any powered PC speakers, home stereo systems and A/V receivers..
  • NOTE: This adapter doesn't have built-in battery, power by AC to DC power adapter or USB cable. This product is a bluetooth receiver ONLY, not a bluetooth transmitter. Only to give Bluetooth capabilities to an existing stereo / powered speaker / PA..
Check Stock