Categories

Best Special Machine Screw

Presser Feet Set 11Pcs Snap On Sewing Machine Foot for Brother Singer Janome Babylock Kenmore Low Shank Sewing Machine Use

  • ...d the transparent design case lets you quickly find the right sewing foot attachment in a bilnk.
  • WIDE APPLICATION with different kinds of sewing machine projects stitches with the presser foot set includes the roller foot,zipper foot,quilting foot and button foot,apply for leather,embroidery, zipper,buttons and many special crafts, expand your possibilities and impress your family with sophisticated crafts.
  • SNAP ON INSTALLATION presser foot is quick and easy to attach to your sewing machine without using the screwdriver,this sewing foot set will fit most low shank sewing machine brands such as Brother, Singer, Janome, Kenmore, Babylock and so on,does not fit slant shank,high shank,industrial or mini sewing machine.
  • MEASURE YOUR SHANK to make sure wheather your sewing machine can attach this sewing feet set,just find the thumb screw that holds the foot on the machine and measure the distance from the center of screw to the sewing board,low shank has a 1/2" measurement,NOW LET'S START SEWING with Windman and your projects will be just fine.
  • NICE GIFT for your friends and family who sew a lot,and also great to have for yourself to make kinds of sewing crafts,Windman assures 100% satisfaction to our customers and if you have problems during using these press....
Check Stock

CGOLDENWALL Automatic Screw Feeder Machine Tapping Machine Supplier Screwdriver Feeder Microcomputer Control Digital Display Count Applicable Screw Size from M1.0 to M5.0 for Different Types Screws

  • INCREASE PRODUCTIVITY--The screw feeder will jam the arranged screws in the discharge port, and the next screw will come up automatically after the user removes one. Compared with the traditional screw plate, extracting each screw can save 1.4s with our machine, thus production efficiency can be improved by 4 times..
  • ALMOST SUB FOR YOUR BROAD--With its easy orbital adjustment, the screw machine can handle screws with M1-M5 (< 20 mm) between any specification. Ordinary screw, flat head screws, washers screw, tapping screw and so on, all can be applied to. So it especially suitable for the assembly of electronic processing plants such as toys, communication equipment, electrical appliances, toy auto parts, etc..
  • TWO TYPES OF COUNTING FUNCTION--Cumulative count: when a screw is removed, the machine will automatically count a number.
  • Fixed number counting: users can set the required number of screws. After taking the set number, the machine will beep once and the machine will automatically enter the next cycle of counting. Both method facilitates to count the production capacity and reduce the time for subsequent statistics and settlement..
  • CONVENIENT ADJUSTABLE MACHINE--All-metal supplier silo: sturdy and durable, the height of the brush in it can be adjus....
Check Stock

Tattoo Eccentric Wheel with 1-5mm Adjustable Stroke, 1pc Replacement Rotary Motor Tattoo Machine Copper Part Cam Wheel Suitable for Tattoo Machine (2.5mm)

  • 【PACKAGE INCLUDES】 - The tattoo eccentric wheel made of quality Brass material, it is rust resistant and durable. After many tests, it does not wear too much, it is lightweight, easy to carry and for long time use..
  • 【WORK EFFICIENTLY】 - You can easily adjust with a wrench, simple, efficient and convenient to use..
  • 【EXCELLENT QUALITY】 - Integrated spiral design, easy to use with a wrench to tighten, but also anti-slip, whatever the vibration of the tattoo machine, do not be afraid of the slipping of the needle.It with special design, suitable for most types of tattoo direct drive motor machines. Can easily realize the multi-function of a machine and multi-purpose for a machine..
  • 【HOW TO USE】 - Loosen the screw with a wrench, rotate the inner core, the number corresponding to the small point is the eccentric size, lock the screw, then it can be used..
  • 【SATISFIED PROMISE】 - 100% Satisfaction Guarantee: Ship from the US stock, and we support a 90-day no reason replacement or refund..
Check Stock

1/4\ -20 x 1-1/2\ Hanger Bolts, 8 pack

  • Machine Screw Thread Length: 17mm / 0.67".
  • Material: Carbon Steel construction with zinc plated, provides great corrosion resistance and antirust ability for long service life..
  • Advantage: Good for wooden furniture. Wood screw thread on one end and a machine screw thread on the other end..
  • Applications: Iron furniture, outdoor furniture, household furniture, stair post, wooden guardrail, solid wood furniture, custom furniture, office furniture..
Check Stock

The Hillman Group 491410 Hanger Bolt, 8-32 X 1-1/2-Inch , 8-Pack

  • Machine Screw Thread Length: 22mm / 0.87".
  • Material: Carbon Steel construction with zinc plated, provides great corrosion resistance and antirust ability for long service life..
  • Advantage: Good for wooden furniture jointing. Wood screw thread on one end and a machine screw thread on the other end..
  • Applications: Iron furniture, outdoor furniture, household furniture, stair post, wooden guardrail, solid wood furniture, custom furniture, office furniture..
Check Stock

Loboo Idea Speed Out Screw Extractor Drill Bits Tool Set Broken Damaged Bolt Remover Guide Set Broken Easy Out Fastener Kit (5 Pieces, HSS 4341# Silver)

  • Designed for Screw & Bolt Extracting: Each bit has dual head designs, one is used to drill a hole in the middle of the the damaged screws or bolt with the drill end, the other is used to extracting it. The special design helps you grab and remove the screws precisely and easily in 10 seconds or less..
  • H.S.S 4341 Material: Loboo Idea stripped screw extractor is made of high quality H.S.S 4341 material, has 63-65 HRC hardness which is harder than most of other similar products. Durable and solid, suitable to removes even the most stubborn stripped, damaged, embedded, rusted and painted-over screws and bolts. Best gift for any craftsman..
  • Multi Purpose: 5 different sizes of bits (#0, #1, #2, #3, #4) are included in package of stripped screw remover kit and #0 is a gift provided for extra using. All is for ensuring that the screw extractor kit can meet all of your needs. Great for removing stripped, broken head, rusted, unscrew, free-spinning and deck screws or bolts..
  • Easy to Use: 3 simple steps: 1. Drill out, 2. Flip Bit, 3. Extract. Just no other tools needed but a drill, select a smaller bit than the damage screw, you can easily remove the screw. Note: please make sure to run the drill in reverse during the process..
  • Wide Application: The screw and bolt ....
Check Stock

Eureka U Extended Life Belt (Set of 2)

  • ...Not Compatible with Bissell model 1413, 1797, 1816, 1831, 1981, 2112, 3576, 61C5, 6584, 6585, 9595, 9595A, 23T7T, 35831, 68C71, 98NA1, 23T7-V, 68C7-U. Not compable with Part Number #1604895. The perimeter of vacuum belt is 14.72 inches. Please check the length of the belt from your own machine before purchasing..
  • 【Special Rubber】 Our vacuum cleaner belt is made of special rubber, so it has long service life. There are special lines on the surface to increase the friction of the belt. Keep your vacuum running smoothly. Our factory use original vacuums to make molds, making belts perfectly compatible with vacuums..
  • 【Installation Method】Using a Philips head screw driver remove the screws and lift off the brush plate. Remove the roller and the old belt. Attach the new belt to the motor pulley and the roller. With belt in place, push and slide roller into the unit, make sure the roller is in the correct place. Reposition the brush plate and screw in the screws. Note: If the belt is too tight to install, please stop the installation..
  • 【Replace Belts】Replace your vacuum cleaner belts every 3 to 6 months to ensure optimum performance of your vacuum cleaner. Due to frequent use, the belt will wear and eventually break. So it is recommended to check a....
Check Stock

Quilting Ruler Foot Presser, Free-Motion Round Ruler Foot, High Shank-Open Toe Sewing Machine Parts, for Horizontal Rotary Hook Models

  • Quilting Ruler Foot Low Shank: You need a special foot on your sewing machine, the so-called Ruler Foot. This foot is round in shape and with this, you can easily follow the shape of the ruler..
  • Machine Quilting Foot: Made of sturdy metal, The needle is positioned exactly 1/4 inch from the edges of the ruler's foot, the open toe assures good vision when sewing..
  • Ruler Foot Size: If you do not know what shank your machine is, all you need to do is lower your foot and then measure the height of the center of the hole for the screw from the needle plate..
  • Sewing Machine Quilting Rulers Foot: makes you swirls are easy to do and the spacing between lines helps out a lot and where need to make next lines of swirls in free motion quilting..
  • High Shank Special Foot: For Pfaff 1200 Grand Quilter, Husqvarna Mega Quilter, Brother PQ1300 PQ1300 PQ1500S, Janome 1600P 1600P-DB 1600-QC, Singer 2OU 31-15, Babylock BLQP BL500A, JUKI DDL-227 DDL-555 DDL-8700 TL-98E TL-98P TL-98QE TL2000Qi TL2010..
Check Stock

8 Pack M6x50 Hanger Bolts Double Headed Bolts Self-Tapping Screw 50mm Hanger Bolts for Furniture

  • Machine Screw Thread Length: 22mm / 0.87".
  • Material: Carbon Steel construction with zinc plated, provides great corrosion resistance and antirust ability for long service life..
  • Advantage: Good for wooden furniture jointing. Wood screw thread on one end and a machine screw thread on the other end..
  • Applications: Iron furniture, outdoor furniture, household furniture, stair post, wooden guardrail, solid wood furniture, custom furniture, office furniture..
Check Stock

The Hillman Group 260288 1 1 1 1/2 x 8-Inch Anchor Bolt, 50-Pack

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

Swpeet 60Pcs M6 x 40 Hex Shaped Male Thread Metal Clamping Hand Star Knobs with 304 Stainless Steel Hex Nuts and Flat Washer, Clamping Screw Plastic Screw-On Handle Clamping Knob (M6*40)

  • ...e check the thread size you need before buying..
  • 3,【 Thread Size】------- M8 x 30mm/ 0.30 x 1.5inch(D*L), M6 x 20mm/ 0.23 x 0.8inch(D*L), M4 x 12mm/ 0.15 x 0.47inch(D*L).
  • M8 Head Dia (Approx): 38mm / 1.47inch, M6 Screw Knob Head Dia (Approx): 32mm / 1.26inch, M4 Screw Knob Head Dia (Approx): 25mm / 0.98inch..
  • 4,【Special Star Shape Design】------- This Knob are Special Star Shape Design, Great for comfortable hand grip, accord with ergonomic design and plays a non-slip effect without scratching your hands.Knob handles are made of high quality plastic for durability and long service life..
  • 5,【Wide Application】------- The head is made of plastic, good toughness, strong anti-aging ability, zinc plating on the surface of the screw, corrosion resistance. This Plastic Hand Knob Screw is easy to install and remove and does not require any tools.Widely used in furniture decoration, electronic equipment, mechanical equipment and other related industries..
Check Stock

Qty 25 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolts, Wall Anchor Bolt

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

uxcell M8 Hanger Bolts Length 2\(50mm) Double Headed Bolts Self-Tapping Screw 8mm Wood Joint Furniture Legs 8pcs

  • Wood Screw Thread Length: 12.5mm / 0.49".
  • Machine Screw Thread Length: 12.5mm / 0.49".
  • Material: Carbon Steel construction with zinc plated, provides great corrosion resistance and antirust ability for long service life..
  • Advantage: Good for wooden furniture jointing. Wood screw thread on one end and a machine screw thread on the other end..
  • Applications: Iron furniture, outdoor furniture, household furniture, stair post, wooden guardrail, solid wood furniture, custom furniture, office furniture..
Check Stock